ath9k_hw: Assign default xlna config for AR9485

For AR9485 boards with XLNA, the default gpio config
is not set correctly, fix this.

Cc: stable@vger.kernel.org
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index e6b92ff265fd6e878274a2d0b35660a5bfa9a1c5..25b8bbbe74fe347f6f0f17fcc129ebd100f88301 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3563,14 +3563,18 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 {
        struct ath9k_hw_capabilities *pCap = &ah->caps;
        int chain;
-       u32 regval;
+       u32 regval, value;
        static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = {
                        AR_PHY_SWITCH_CHAIN_0,
                        AR_PHY_SWITCH_CHAIN_1,
                        AR_PHY_SWITCH_CHAIN_2,
        };
 
-       u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
+       if (AR_SREV_9485(ah) && (ar9003_hw_get_rx_gain_idx(ah) == 0))
+               ath9k_hw_cfg_output(ah, AR9300_EXT_LNA_CTL_GPIO_AR9485,
+                                   AR_GPIO_OUTPUT_MUX_AS_PCIE_ATTENTION_LED);
+
+       value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz);
 
        if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
                REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM,

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index e71774196c01bbf7fa6f3a33b1789556fc63ae9a..5013c731f9f6de2bb79a9a4d86f4fd0323ef7a88 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -351,6 +351,8 @@
 
 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ          -118
 
+#define AR9300_EXT_LNA_CTL_GPIO_AR9485 9
+
 /*
  * AGC Field Definitions
  */