Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Sam Song, 21 August 2004:
+ - Fix a typo in README
+ - Align "(RO)" output for "flinfo" after "protect on"
+ - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+ ratio 1:1 when core frequency less than 50MHz
+
* Patches by himba, 21 Aug 2004:
- fix some "use of label at end of compound statement" warnings
- Define type of LCD panel on lubbock board if CONFIG_LCD is used
supported (PIP405, MIP405, MPC5200); define
CONFIG_USB_UHCI to enable it.
define CONFIG_USB_KEYBOARD to enable the USB Keyboard
- end define CONFIG_USB_STORAGE to enable the USB
+ and define CONFIG_USB_STORAGE to enable the USB
storage devices.
Note:
Supported are USB Keyboards and USB Floppy drives
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"gatewayip=172.16.115.254\0" \
"netmask=255.255.255.0\0" \
- "kernel_addr=ff880000\0" \
- "ramdisk_addr=ff980000\0" \
+ "kernel_addr=ff080000\0" \
+ "ramdisk_addr=ff200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
#endif
+#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
/*-----------------------------------------------------------------------
* Cache Configuration
*/
* power management and some other internal clocks
*/
#define SCCR_MASK SCCR_EBDF00
-/* Up to 64MHz system clock, we use 1:2 SYSTEM/BUS ratio */
+/* Up to 48MHz system clock, we use 1:1 SYSTEM/BUS ratio */
+#if defined(RPXlite_64MHz)
#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */
+#else
+#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */
+#endif
/*-----------------------------------------------------------------------
* PCMCIA stuff