ar71xx: remove AP113 reference design board support

Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>

diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 38e665fb64836935c6ae2dacdb4f8cc4007090e3..dcdaab022d270c2d1024c0676fe123a556152d38 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -45,7 +45,6 @@ arduino-yun)
        ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
        ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
        ;;
-ap113|\
 db120)
        ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
        ;;

diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index f287d4bff27653c35ca19fb501a61bb26d0692c4..440e00f5bfb8c5330a17e11cb5a967049350943d 100755 (executable)
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -146,7 +146,6 @@ ar71xx_setup_interfaces()
        ubnt-unifi-outdoor)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
-       ap113|\
        pb92|\
        wzr-hp-g300nh2)
                ucidef_add_switch "switch0" \

diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
index c6b91b77375b214ef232dda1f73020bf29b1ecc4..c67555f963f8d1858ba01eb358f3b817f263feaa 100644 (file)
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
@@ -48,7 +48,6 @@ case "$board" in
 dir-825-c1|\
 wzr-hp-g300nh2|\
 pb92|\
-ap113|\
 tl-wdr4300|\
 tl-wr1041n-v2|\
 wrt160nl|\

diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index ffab8ebbc4e03d72fe1d7ce3b09b78b6fa5e66ba..cf84dadf042b539b566b971a37969f9713d1c84e 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -435,9 +435,6 @@ ar71xx_board_detect() {
        *"Arduino Yun")
                name="arduino-yun"
                ;;
-       *AP113)
-               name="ap113"
-               ;;
        *"AP121 reference board")
                name="ap121"
                ;;

diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 0100d27211f1d6a48ce3e0c9ff801953d4ec0129..b028cd35a88380033e25729be042cc616a53e1b1 100755 (executable)
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -261,7 +261,6 @@ platform_check_image() {
                ;;
        alfa-ap96|\
        alfa-nx|\
-       ap113|\
        ap121-mini|\
        ap121|\
        ap135-020|\

diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index e83e6687473e0d229f212c38f1e30cc187a56595..5e0275aa064a6c2aad4955eea022be10fd2b69a3 100644 (file)
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -40,7 +40,6 @@ CONFIG_ATH79_MACH_ALL0315N=y
 CONFIG_ATH79_MACH_ANTMINER_S1=y
 CONFIG_ATH79_MACH_ANTMINER_S3=y
 CONFIG_ATH79_MACH_ANTROUTER_R1=y
-CONFIG_ATH79_MACH_AP113=y
 CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index a0f24e16b50dea70c72b638bdeaed1eb6046fabe..4d82db2c7658bb44eb18283e0a59533631f4bdef 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN
          Say 'Y' here if you want your kernel to support the
          Arduino Yun.
 
-config ATH79_MACH_AP113
-       bool "Atheros AP113 board support"
-       select SOC_AR724X
-       select ATH79_DEV_M25P80
-       select ATH79_DEV_PB9X_PCI if PCI
-       select ATH79_DEV_GPIO_BUTTONS
-       select ATH79_DEV_LEDS_GPIO
-       select ATH79_DEV_USB
-       select ATH79_DEV_ETH
-
 config ATH79_MACH_AP132
        bool "Atheros AP132 reference board"
        select SOC_QCA955X

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 03ca1019064ecda718159991c4db291ab8421ee2..a39e8d2de7871fdd3df19295577b91780d92f508 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N)             += mach-all0315n.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)           += mach-antminer-s1.o
 obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)           += mach-antminer-s3.o
 obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1)          += mach-antrouter-r1.o
-obj-$(CONFIG_ATH79_MACH_AP113)                 += mach-ap113.o
 obj-$(CONFIG_ATH79_MACH_AP121)                 += mach-ap121.o
 obj-$(CONFIG_ATH79_MACH_AP132)                 += mach-ap132.o
 obj-$(CONFIG_ATH79_MACH_AP136)                 += mach-ap136.o

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
deleted file mode 100644 (file)
index 9b38faa..0000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap113.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- *  Atheros AP113 board support
- *
- *  Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB             0
-#define AP113_GPIO_LED_STATUS          1
-#define AP113_GPIO_LED_ST              11
-
-#define AP113_GPIO_BTN_JUMPSTART       12
-
-#define AP113_KEYS_POLL_INTERVAL       20      /* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL   (3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
-       {
-               .name           = "ap113:green:usb",
-               .gpio           = AP113_GPIO_LED_USB,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:status",
-               .gpio           = AP113_GPIO_LED_STATUS,
-               .active_low     = 1,
-       },
-       {
-               .name           = "ap113:green:st",
-               .gpio           = AP113_GPIO_LED_ST,
-               .active_low     = 1,
-       }
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
-       {
-               .desc           = "jumpstart button",
-               .type           = EV_KEY,
-               .code           = KEY_WPS_BUTTON,
-               .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = AP113_GPIO_BTN_JUMPSTART,
-               .active_low     = 1,
-       },
-};
-
-static void __init ap113_setup(void)
-{
-       u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
-       ath79_register_m25p80(NULL);
-
-       ath79_register_mdio(0, ~BIT(0));
-       ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ath79_eth0_data.speed = SPEED_1000;
-       ath79_eth0_data.duplex = DUPLEX_FULL;
-       ath79_eth0_data.phy_mask = BIT(0);
-
-       ath79_register_eth(0);
-
-       ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
-                                        ARRAY_SIZE(ap113_gpio_keys),
-                                        ap113_gpio_keys);
-       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
-                                       ap113_leds_gpio);
-
-       ath79_register_pci();
-
-       ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
-            ap113_setup);

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index cd26598770f9318d23cd47a5e1376362b045c4c9..5893790c61b5a2e8c3c29f0eae44bd282144ac44 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -26,7 +26,6 @@ enum ath79_mach_type {
        ATH79_MACH_ANTMINER_S1,                 /* Antminer S1 */
        ATH79_MACH_ANTMINER_S3,                 /* Antminer S3 */
        ATH79_MACH_ANTROUTER_R1,                /* Antrouter R1 */
-       ATH79_MACH_AP113,                       /* Atheros AP113 reference board */
        ATH79_MACH_AP121,                       /* Atheros AP121 reference board */
        ATH79_MACH_AP121_MINI,                  /* Atheros AP121-MINI reference board */
        ATH79_MACH_AP132,                       /* Atheros AP132 reference board */

diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 3d5d20daed581c32527a0e7c61cf86416cb5782d..aa898ee827a7818132b30aca06dd64cbd68f5461 100644 (file)
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -4,7 +4,6 @@
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
 # CONFIG_ATH79_MACH_ANTMINER_S1 is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set

diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 1c3a650c391eec47d4ea2261d61326727b9997cd..49480f2be8ca15186d6d6e17dce1e9716f05bac4 100644 (file)
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -3,7 +3,6 @@
 # CONFIG_ATH79_MACH_ALFA_NX is not set
 # CONFIG_ATH79_MACH_ALL0258N is not set
 # CONFIG_ATH79_MACH_ALL0315N is not set
-# CONFIG_ATH79_MACH_AP113 is not set
 # CONFIG_ATH79_MACH_AP121 is not set
 # CONFIG_ATH79_MACH_AP132 is not set
 # CONFIG_ATH79_MACH_AP136 is not set