+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "kirkwood-linksys-viper.dts"
-
-/ {
- model = "Linksys E4200 v2 (Viper)";
- compatible = "linksys,e4200-v2", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
- *
- * (c) 2013 Jonas Gorski <jogo@openwrt.org>
- * (c) 2013 Deutsche Telekom Innovation Laboratories
- * (c) 2014 Luka Perkov <luka@openwrt.org>
- * (c) 2014 Dan Walters <dan@walters.io>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
- model = "Linksys EA3500 (Audi)";
- compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x4000000>;
- };
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
- pinctrl-names = "default";
-
- wps {
- label = "WPS Button";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led_green_power>;
- pinctrl-names = "default";
-
- led_power: power {
- label = "audi:green:power";
- gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-};
-
-&pinctrl {
- pmx_led_green_power: pmx-led-green-power {
- marvell,pins = "mpp7";
- marvell,function = "gpo";
- };
-
- pmx_btn_wps: pmx-btn-wps {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
-};
-
-&mdio {
- status = "okay";
-
- switch@10 {
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <16>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- label = "ethernet1";
- };
-
- port@1 {
- reg = <1>;
- label = "ethernet2";
- };
-
- port@2 {
- reg = <2>;
- label = "ethernet3";
- };
-
- port@3 {
- reg = <3>;
- label = "ethernet4";
- };
-
- port@4 {
- reg = <4>;
- label = "internet";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- ethernet = <ð0port>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&pmx_nand>;
- pinctrl-names = "default";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- label = "u_env";
- reg = <0x80000 0x4000>;
- };
-
- partition@84000 {
- label = "s_env";
- reg = <0x84000 0x4000>;
- };
-
- partition@200000 {
- label = "kernel1";
- reg = <0x200000 0x290000>;
- };
-
- partition@490000 {
- label = "rootfs1";
- reg = <0x490000 0x1170000>;
- };
-
- partition@1600000 {
- label = "kernel2";
- reg = <0x1600000 0x290000>;
- };
-
- partition@1890000 {
- label = "rootfs2";
- reg = <0x1890000 0x1170000>;
- };
-
- partition@2a00000 {
- label = "syscfg";
- reg = <0x2a00000 0x1600000>;
- };
-
- partition@88000 {
- label = "unused";
- reg = <0x88000 0x178000>;
- };
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
- * fixed speed and duplex.
- */
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- speed = <1000>;
- duplex = <1>;
- };
-};
-
-/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. This port is disabled to avoid confusion.
- */
-ð1 {
- status = "disabled";
-};
-
-/* There is no battery on the board, so the RTC does not keep
- * time when there is no power, making it useless.
- */
-&rtc {
- status = "disabled";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "kirkwood-linksys-viper.dts"
-
-/ {
- model = "Linksys EA4500 (Viper)";
- compatible = "linksys,ea4500", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-};
+++ /dev/null
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Seagate GoFlex Home";
- compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_health;
- led-failsafe = &led_fault;
- led-running = &led_health;
- led-upgrade = &led_fault;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x8000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pmx_usb_power_enable: pmx-usb-power-enable {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_white: pmx-led-white {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- pmx_led_green: pmx-led_green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_led_orange: pmx-led-orange {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
- };
-
- serial@12000 {
- status = "okay";
- };
-
- sata@80000 {
- status = "okay";
- nr-ports = <2>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_health: health {
- label = "status:green:health";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_fault: fault {
- label = "status:orange:fault";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
-
- misc {
- label = "status:white:misc";
- gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
- };
-
- regulators {
- compatible = "simple-bus";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&pmx_usb_power_enable>;
- pinctrl-names = "default";
-
- usb_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- chip-delay = <40>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
-
- partition@100000 {
- label = "ubi";
- reg = <0x0100000 0xff00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-#include "kirkwood-nsa3x0-common.dtsi"
-
-/*
- * There are at least two different NSA310 designs. This variant has
- * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
- */
-
-/ {
- model = "ZyXEL NSA310b";
- compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_green_sys;
- led-failsafe = &led_red_sys;
- led-running = &led_green_sys;
- led-upgrade = &led_red_sys;
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-names = "default";
-
- pmx_led_esata_green: pmx-led-esata-green {
- marvell,pins = "mpp12";
- marvell,function = "gpio";
- };
-
- pmx_led_esata_red: pmx-led-esata-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_red: pmx-led-usb-red {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_red: pmx-led-sys-red {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd_green: pmx-led-hdd-green {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd_red: pmx-led-hdd-red {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- };
-
- i2c@11000 {
- status = "okay";
-
- lm85: lm85@2e {
- compatible = "national,lm85";
- reg = <0x2e>;
- };
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- led_green_sys: green-sys {
- label = "nsa310:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- led_red_sys: red-sys {
- label = "nsa310:red:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- green-hdd {
- label = "nsa310:green:hdd";
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- red-hdd {
- label = "nsa310:red:hdd";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- };
-
- green-esata {
- label = "nsa310:green:esata";
- gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata2";
- };
-
- red-esata {
- label = "nsa310:red:esata";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- green-usb {
- label = "nsa310:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usb-host";
- };
-
- red-usb {
- label = "nsa310:red:usb";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- };
-
- green-copy {
- label = "nsa310:green:copy";
- gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- };
-
- red-copy {
- label = "nsa310:red:copy";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "ZyXEL NSA310S";
- compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-
- aliases {
- led-boot = &led_green_sys;
- led-failsafe = &led_red_sys;
- led-running = &led_green_sys;
- led-upgrade = &led_red_sys;
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- ocp@f1000000 {
- pinctrl: pin-controller@10000 {
- pinctrl-names = "default";
-
- pmx_usb_power: pmx-usb-power {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- pmx_btn_copy: pmx-btn-copy {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- pmx_btn_power: pmx-btn-power {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- pmx_led_usb_green: pmx-led-usb-green {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_green: pmx-led-copy-green {
- marvell,pins = "mpp22";
- marvell,function = "gpio";
- };
-
- pmx_led_copy_red: pmx-led-copy-red {
- marvell,pins = "mpp23";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_green: pmx-led-sys-green {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- pmx_led_sys_red: pmx-led-sys-red {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_green: pmx-led-hdd1-green {
- marvell,pins = "mpp16";
- marvell,function = "gpio";
- };
-
- pmx_led_hdd1_red: pmx-led-hdd1-red {
- marvell,pins = "mpp13";
- marvell,function = "gpio";
- };
-
- pmx_pwr_sata1: pmx-pwr-sata1 {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- };
-
- i2c@11000 {
- status = "okay";
-
- rtc@68 {
- compatible = "htk,ht1382";
- reg = <0x68>;
- };
- };
-
- serial@12000 {
- status = "okay";
- };
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
- pinctrl-names = "default";
-
- usb0_power: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
- };
-
- sata1_power: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "SATA1 Power";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
- pinctrl-names = "default";
-
- power {
- label = "Power Button";
- linux,code = <KEY_POWER>;
- gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
- };
-
- copy {
- label = "Copy Button";
- linux,code = <KEY_COPY>;
- gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
- };
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_green_sys: green-sys {
- label = "nsa310s:green:sys";
- gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
-
- led_red_sys: red-sys {
- label = "nsa310s:red:sys";
- gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
- };
-
- green-hdd1 {
- label = "nsa310s:green:hdd1";
- gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "ata1";
- };
-
- red-hdd1 {
- label = "nsa310s:red:hdd1";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
- };
-
- green-usb {
- label = "nsa310s:green:usb";
- gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usb-host";
- };
-
- green-copy {
- label = "nsa310s:green:copy";
- gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
- };
-
- red-copy {
- label = "nsa310s:red:copy";
- gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
- };
-};
-
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@1 {
- reg = <1>;
- phy-mode = "rgmii-id";
- marvell,reg-init = <0x1 0x16 0x0 0x3>,
- <0x1 0x10 0x0 0x1017>,
- <0x1 0x11 0x0 0x4408>,
- <0x1 0x16 0x0 0x0>;
- };
-};
-
-&nand {
- status = "okay";
- chip-delay = <35>;
-
- partition@0 {
- label = "uboot";
- reg = <0x0000000 0x00c0000>;
- read-only;
- };
- partition@c0000 {
- label = "uboot_env";
- reg = <0x00c0000 0x0080000>;
- };
- partition@140000 {
- label = "ubi";
- reg = <0x0140000 0x7ec0000>;
- };
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&sata {
- status = "okay";
- nr-ports = <1>;
-};
+++ /dev/null
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6282.dtsi"
-
-/ {
- model = "Cisco Systems ON100";
- compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x20000000>;
- };
-
- aliases {
- led-boot = &led_health_green;
- led-failsafe = &led_health_red;
- led-running = &led_health_green;
- led-upgrade = &led_health_red;
- serial0 = &uart0;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&pmx_btn_reset>;
- pinctrl-names = "default";
-
- reset {
- label = "Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>;
- pinctrl-names = "default";
-
- led_health_green: health-green {
- label = "on100:green:health";
- gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- led_health_red: health-red {
- label = "on100:red:health";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- };
-
- health2-green {
- label = "on100:green:health2";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- health2-red {
- label = "on100:red:health2";
- gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- ethernet0-port@0 {
- phy-handle = <ðphy0>;
- phy-connection-type = "rgmii-id";
- };
-};
-
-ð1 {
- status = "okay";
-
- ethernet1-port@0 {
- phy-handle = <ðphy1>;
- phy-connection-type = "rgmii-id";
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy@0 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- /* Marvell 88E1121R */
- compatible = "ethernet-phy-id0141.0cb0",
- "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
-};
-
-&nand {
- status = "okay";
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000000 0x000a0000>;
- read-only;
- };
-
- partition@a0000 {
- label = "u-boot environment";
- reg = <0x000a0000 0x00020000>;
- read-only;
- };
-
- partition@c0000 {
- label = "kernel";
- reg = <0x000c0000 0x00540000>;
- };
-
- partition@600000 {
- label = "ubi";
- reg = <0x00600000 0x1fa00000>;
- };
-};
-
-&pinctrl {
- pmx_led_health_red: pmx-led-health-red {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- pmx_led_health_green: pmx-led-health-green {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- pmx_led_health2_red: pmx-led-health2-red {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- pmx_led_health2_green: pmx-led-health2-green {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- pmx_btn_reset: pmx-btn-reset {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-};
-
-&sdio {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "kirkwood-linksys-viper.dts"
+
+/ {
+ model = "Linksys E4200 v2 (Viper)";
+ compatible = "linksys,e4200-v2", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
+ *
+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
+ * (c) 2013 Deutsche Telekom Innovation Laboratories
+ * (c) 2014 Luka Perkov <luka@openwrt.org>
+ * (c) 2014 Dan Walters <dan@walters.io>
+ *
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+ model = "Linksys EA3500 (Audi)";
+ compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>;
+ pinctrl-names = "default";
+
+ wps {
+ label = "WPS Button";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&pmx_led_green_power>;
+ pinctrl-names = "default";
+
+ led_power: power {
+ label = "audi:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+};
+
+&pinctrl {
+ pmx_led_green_power: pmx-led-green-power {
+ marvell,pins = "mpp7";
+ marvell,function = "gpo";
+ };
+
+ pmx_btn_wps: pmx-btn-wps {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "ethernet1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "ethernet2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "ethernet3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "ethernet4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <ð0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&pmx_nand>;
+ pinctrl-names = "default";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u_env";
+ reg = <0x80000 0x4000>;
+ };
+
+ partition@84000 {
+ label = "s_env";
+ reg = <0x84000 0x4000>;
+ };
+
+ partition@200000 {
+ label = "kernel1";
+ reg = <0x200000 0x290000>;
+ };
+
+ partition@490000 {
+ label = "rootfs1";
+ reg = <0x490000 0x1170000>;
+ };
+
+ partition@1600000 {
+ label = "kernel2";
+ reg = <0x1600000 0x290000>;
+ };
+
+ partition@1890000 {
+ label = "rootfs2";
+ reg = <0x1890000 0x1170000>;
+ };
+
+ partition@2a00000 {
+ label = "syscfg";
+ reg = <0x2a00000 0x1600000>;
+ };
+
+ partition@88000 {
+ label = "unused";
+ reg = <0x88000 0x178000>;
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex.
+ */
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ speed = <1000>;
+ duplex = <1>;
+ };
+};
+
+/* eth1 is connected to the switch at port 6. However DSA only supports a
+ * single CPU port. This port is disabled to avoid confusion.
+ */
+ð1 {
+ status = "disabled";
+};
+
+/* There is no battery on the board, so the RTC does not keep
+ * time when there is no power, making it useless.
+ */
+&rtc {
+ status = "disabled";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "kirkwood-linksys-viper.dts"
+
+/ {
+ model = "Linksys EA4500 (Viper)";
+ compatible = "linksys,ea4500", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
--- /dev/null
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "Seagate GoFlex Home";
+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pmx_usb_power_enable: pmx-usb-power-enable {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_white: pmx-led-white {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_green: pmx-led_green {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_orange: pmx-led-orange {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+
+ misc {
+ label = "status:white:misc";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&pmx_usb_power_enable>;
+ pinctrl-names = "default";
+
+ usb_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ chip-delay = <40>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "ubi";
+ reg = <0x0100000 0xff00000>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant has
+ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
+ */
+
+/ {
+ model = "ZyXEL NSA310b";
+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_green_sys;
+ led-failsafe = &led_red_sys;
+ led-running = &led_green_sys;
+ led-upgrade = &led_red_sys;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_led_esata_green: pmx-led-esata-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_esata_red: pmx-led-esata-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_red: pmx-led-usb-red {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_red: pmx-led-sys-red {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_green: pmx-led-hdd-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_red: pmx-led-hdd-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ lm85: lm85@2e {
+ compatible = "national,lm85";
+ reg = <0x2e>;
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_green_sys: green-sys {
+ label = "nsa310:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led_red_sys: red-sys {
+ label = "nsa310:red:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-hdd {
+ label = "nsa310:green:hdd";
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
+ };
+
+ red-hdd {
+ label = "nsa310:red:hdd";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-esata {
+ label = "nsa310:green:esata";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata2";
+ };
+
+ red-esata {
+ label = "nsa310:red:esata";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-usb {
+ label = "nsa310:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usb-host";
+ };
+
+ red-usb {
+ label = "nsa310:red:usb";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-copy {
+ label = "nsa310:green:copy";
+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ red-copy {
+ label = "nsa310:red:copy";
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "ZyXEL NSA310S";
+ compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ aliases {
+ led-boot = &led_green_sys;
+ led-failsafe = &led_red_sys;
+ led-running = &led_green_sys;
+ led-upgrade = &led_red_sys;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-names = "default";
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp22";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp23";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_red: pmx-led-sys-red {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_green: pmx-led-hdd1-green {
+ marvell,pins = "mpp16";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd1_red: pmx-led-hdd1-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_pwr_sata1: pmx-pwr-sata1 {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ i2c@11000 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "htk,ht1382";
+ reg = <0x68>;
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
+ pinctrl-names = "default";
+
+ usb0_power: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata1_power: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
+ pinctrl-names = "default";
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ };
+
+ copy {
+ label = "Copy Button";
+ linux,code = <KEY_COPY>;
+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+ };
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_green_sys: green-sys {
+ label = "nsa310s:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led_red_sys: red-sys {
+ label = "nsa310s:red:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-hdd1 {
+ label = "nsa310s:green:hdd1";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ata1";
+ };
+
+ red-hdd1 {
+ label = "nsa310s:red:hdd1";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ green-usb {
+ label = "nsa310s:green:usb";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usb-host";
+ };
+
+ green-copy {
+ label = "nsa310s:green:copy";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ red-copy {
+ label = "nsa310s:red:copy";
+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii-id";
+ marvell,reg-init = <0x1 0x16 0x0 0x3>,
+ <0x1 0x10 0x0 0x1017>,
+ <0x1 0x11 0x0 0x4408>,
+ <0x1 0x16 0x0 0x0>;
+ };
+};
+
+&nand {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0000000 0x00c0000>;
+ read-only;
+ };
+ partition@c0000 {
+ label = "uboot_env";
+ reg = <0x00c0000 0x0080000>;
+ };
+ partition@140000 {
+ label = "ubi";
+ reg = <0x0140000 0x7ec0000>;
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+ nr-ports = <1>;
+};
--- /dev/null
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6282.dtsi"
+
+/ {
+ model = "Cisco Systems ON100";
+ compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>;
+ };
+
+ aliases {
+ led-boot = &led_health_green;
+ led-failsafe = &led_health_red;
+ led-running = &led_health_green;
+ led-upgrade = &led_health_red;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&pmx_btn_reset>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "Reset Button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>;
+ pinctrl-names = "default";
+
+ led_health_green: health-green {
+ label = "on100:green:health";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_health_red: health-red {
+ label = "on100:red:health";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
+ health2-green {
+ label = "on100:green:health2";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ health2-red {
+ label = "on100:red:health2";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ phy-handle = <ðphy0>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ ethernet1-port@0 {
+ phy-handle = <ðphy1>;
+ phy-connection-type = "rgmii-id";
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ /* Marvell 88E1121R */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ /* Marvell 88E1121R */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x000a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot environment";
+ reg = <0x000a0000 0x00020000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "kernel";
+ reg = <0x000c0000 0x00540000>;
+ };
+
+ partition@600000 {
+ label = "ubi";
+ reg = <0x00600000 0x1fa00000>;
+ };
+};
+
+&pinctrl {
+ pmx_led_health_red: pmx-led-health-red {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_health_green: pmx-led-health-green {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_health2_red: pmx-led-health2-red {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_health2_green: pmx-led-health2-green {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+};
+
+&sdio {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
projects / openwrt / staging / hauke.git / commitdiff