ieee80211: trim trailing whitespace

diff --git a/net/ieee80211/Kconfig b/net/ieee80211/Kconfig
index 961c711eda97fe51e7b7c1734c8a972beef31849..58ed4319e6930167664bce8e7e5c15cddda301b7 100644 (file)
--- a/net/ieee80211/Kconfig
+++ b/net/ieee80211/Kconfig
@@ -2,19 +2,19 @@ config IEEE80211
        tristate "Generic IEEE 802.11 Networking Stack"
        select NET_RADIO
        ---help---
-       This option enables the hardware independent IEEE 802.11 
+       This option enables the hardware independent IEEE 802.11
        networking stack.
 
 config IEEE80211_DEBUG
        bool "Enable full debugging output"
        depends on IEEE80211
        ---help---
-         This option will enable debug tracing output for the 
-         ieee80211 network stack.  
+         This option will enable debug tracing output for the
+         ieee80211 network stack.
 
-         This will result in the kernel module being ~70k larger.  You 
-         can control which debug output is sent to the kernel log by 
-         setting the value in 
+         This will result in the kernel module being ~70k larger.  You
+         can control which debug output is sent to the kernel log by
+         setting the value in
 
          /proc/net/ieee80211/debug_level
 
@@ -22,10 +22,10 @@ config IEEE80211_DEBUG
 
          % echo 0x00000FFO > /proc/net/ieee80211/debug_level
 
-         For a list of values you can assign to debug_level, you 
+         For a list of values you can assign to debug_level, you
          can look at the bit mask values in <net/ieee80211.h>
 
-         If you are not trying to debug or develop the ieee80211 
+         If you are not trying to debug or develop the ieee80211
          subsystem, you most likely want to say N here.
 
 config IEEE80211_CRYPT_WEP
@@ -35,7 +35,7 @@ config IEEE80211_CRYPT_WEP
        select CRYPTO_ARC4
        select CRC32
        ---help---
-       Include software based cipher suites in support of IEEE 
+       Include software based cipher suites in support of IEEE
        802.11's WEP.  This is needed for WEP as well as 802.1x.
 
        This can be compiled as a modules and it will be called
@@ -47,8 +47,8 @@ config IEEE80211_CRYPT_CCMP
        select CRYPTO
        select CRYPTO_AES
        ---help---
-       Include software based cipher suites in support of IEEE 802.11i 
-       (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled 
+       Include software based cipher suites in support of IEEE 802.11i
+       (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with CCMP enabled
        networks.
 
        This can be compiled as a modules and it will be called
@@ -60,8 +60,8 @@ config IEEE80211_CRYPT_TKIP
        select CRYPTO
        select CRYPTO_MICHAEL_MIC
        ---help---
-       Include software based cipher suites in support of IEEE 802.11i 
-       (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled 
+       Include software based cipher suites in support of IEEE 802.11i
+       (aka TGi, WPA, WPA2, WPA-PSK, etc.) for use with TKIP enabled
        networks.
 
        This can be compiled as a modules and it will be called

diff --git a/net/ieee80211/Makefile b/net/ieee80211/Makefile
index 29be9cae1def357ebfaeeaf15b4818786f13b095..a6ccac5baea8863b77b967d2fe61358ea77cb158 100644 (file)
--- a/net/ieee80211/Makefile
+++ b/net/ieee80211/Makefile
@@ -1,4 +1,4 @@
-obj-$(CONFIG_IEEE80211) += ieee80211.o 
+obj-$(CONFIG_IEEE80211) += ieee80211.o
 obj-$(CONFIG_IEEE80211) += ieee80211_crypt.o
 obj-$(CONFIG_IEEE80211_CRYPT_WEP) += ieee80211_crypt_wep.o
 obj-$(CONFIG_IEEE80211_CRYPT_CCMP) += ieee80211_crypt_ccmp.o