build: Reorder build variables alphabetically

When build variables are assigned or processed en masse, they'd appear
neater in alphabetical order.

Static initializations are moved to a separate file,
make_helpers/defaults.mk, which in itself is sorted alphabetically.

No functional changes.

Change-Id: I966010042b33de6b67592fb9ffcef8fc44d7d128
Signed-off-by: Jeenu Viswambharan <jeenu.viswambharan@arm.com>

diff --git a/Makefile b/Makefile
index abfc15670a899c666837eb661676021c02f921cc..4fbb91403e6fd380c90649c36a2e938d0abf474e 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -42,87 +42,15 @@ include ${MAKE_HELPERS_DIRECTORY}build_macros.mk
 include ${MAKE_HELPERS_DIRECTORY}build_env.mk
 
 ################################################################################
-# Default values for build configurations
+# Default values for build configurations, and their dependencies
 ################################################################################
 
-# The Target build architecture. Supported values are: aarch64, aarch32.
-ARCH                           := aarch64
-# Build verbosity
-V                              := 0
-# Debug build
-DEBUG                          := 0
-# Build platform
-DEFAULT_PLAT                   := fvp
-PLAT                           := ${DEFAULT_PLAT}
-# SPD choice
-SPD                            := none
-# The AArch32 Secure Payload to be built as BL32 image
-AARCH32_SP                     := none
-# Base commit to perform code check on
-BASE_COMMIT                    := origin/master
-# NS timer register save and restore
-NS_TIMER_SWITCH                        := 0
-# By default, BL1 acts as the reset handler, not BL31
-RESET_TO_BL31                  := 0
-# Include FP registers in cpu context
-CTX_INCLUDE_FPREGS             := 0
-# Build flag to include AArch32 registers in cpu context save and restore
-# during world switch. This flag must be set to 0 for AArch64-only platforms.
-CTX_INCLUDE_AARCH32_REGS       := 1
-# Determine the version of ARM GIC architecture to use for interrupt management
-# in EL3. The platform port can change this value if needed.
-ARM_GIC_ARCH                   := 2
-# Determine the version of ARM CCI product used in the platform. The platform
-# port can change this value if needed.
-ARM_CCI_PRODUCT_ID             := 400
-# Flag used to indicate if ASM_ASSERTION should be enabled for the build.
-# This defaults to being present in DEBUG builds only.
+include ${MAKE_HELPERS_DIRECTORY}defaults.mk
+
+# ASM_ASSERTION enabled for DEBUG builds only
 ASM_ASSERTION                  := ${DEBUG}
-# Build option to choose whether Trusted firmware uses Coherent memory or not.
-USE_COHERENT_MEM               := 1
-# Flag used to choose the power state format viz Extended State-ID or the Original
-# format.
-PSCI_EXTENDED_STATE_ID         := 0
-# Default FIP file name
-FIP_NAME                       := fip.bin
-# Default FWU_FIP file name
-FWU_FIP_NAME                   := fwu_fip.bin
-# By default, use the -pedantic option in the gcc command line
-DISABLE_PEDANTIC               := 0
-# Flags to generate the Chain of Trust
-GENERATE_COT                   := 0
-CREATE_KEYS                    := 1
-SAVE_KEYS                      := 0
-# Flags to build TF with Trusted Boot support
-TRUSTED_BOARD_BOOT             := 0
-# By default, consider that the platform's reset address is not programmable.
-# The platform Makefile is free to override this value.
-PROGRAMMABLE_RESET_ADDRESS     := 0
-# Build flag to treat usage of deprecated platform and framework APIs as error.
-ERROR_DEPRECATED               := 0
-# By default, consider that the platform may release several CPUs out of reset.
-# The platform Makefile is free to override this value.
-COLD_BOOT_SINGLE_CPU           := 0
-# Flag to introduce an infinite loop in BL1 just before it exits into the next
-# image. This is meant to help debugging the post-BL2 phase.
-SPIN_ON_BL1_EXIT               := 0
-# Build PL011 UART driver in minimal generic UART mode
-PL011_GENERIC_UART             := 0
-# Flag to enable Performance Measurement Framework
-ENABLE_PMF                     := 0
-# Flag to enable PSCI STATs functionality
-ENABLE_PSCI_STAT       := 0
-# Whether code and read-only data should be put on separate memory pages.
-# The platform Makefile is free to override this value.
-SEPARATE_CODE_AND_RODATA       := 0
-# Flag to enable new version of image loading
-LOAD_IMAGE_V2          := 0
-# Flag to enable runtime instrumentation using PMF
-ENABLE_RUNTIME_INSTRUMENTATION := 0
-
-ifeq (${ENABLE_RUNTIME_INSTRUMENTATION}, 1)
-ENABLE_PMF                     := 1
-endif
+ENABLE_PMF                     := ${ENABLE_RUNTIME_INSTRUMENTATION}
+PLAT                           := ${DEFAULT_PLAT}
 
 ################################################################################
 # Checkpatch script options
@@ -449,31 +377,30 @@ FIPTOOL                   ?=      ${FIPTOOLPATH}/fiptool${BIN_EXT}
 # Build options checks
 ################################################################################
 
-$(eval $(call assert_boolean,DEBUG))
-$(eval $(call assert_boolean,NS_TIMER_SWITCH))
-$(eval $(call assert_boolean,RESET_TO_BL31))
-$(eval $(call assert_boolean,CTX_INCLUDE_FPREGS))
-$(eval $(call assert_boolean,CTX_INCLUDE_AARCH32_REGS))
 $(eval $(call assert_boolean,ASM_ASSERTION))
-$(eval $(call assert_boolean,USE_COHERENT_MEM))
-$(eval $(call assert_boolean,DISABLE_PEDANTIC))
-$(eval $(call assert_boolean,GENERATE_COT))
-$(eval $(call assert_boolean,CREATE_KEYS))
-$(eval $(call assert_boolean,SAVE_KEYS))
-$(eval $(call assert_boolean,TRUSTED_BOARD_BOOT))
-$(eval $(call assert_boolean,PROGRAMMABLE_RESET_ADDRESS))
 $(eval $(call assert_boolean,COLD_BOOT_SINGLE_CPU))
-$(eval $(call assert_boolean,PSCI_EXTENDED_STATE_ID))
-$(eval $(call assert_boolean,ERROR_DEPRECATED))
+$(eval $(call assert_boolean,CREATE_KEYS))
+$(eval $(call assert_boolean,CTX_INCLUDE_AARCH32_REGS))
+$(eval $(call assert_boolean,CTX_INCLUDE_FPREGS))
+$(eval $(call assert_boolean,DEBUG))
+$(eval $(call assert_boolean,DISABLE_PEDANTIC))
 $(eval $(call assert_boolean,ENABLE_PLAT_COMPAT))
-$(eval $(call assert_boolean,SPIN_ON_BL1_EXIT))
-$(eval $(call assert_boolean,PL011_GENERIC_UART))
 $(eval $(call assert_boolean,ENABLE_PMF))
 $(eval $(call assert_boolean,ENABLE_PSCI_STAT))
-$(eval $(call assert_boolean,SEPARATE_CODE_AND_RODATA))
-$(eval $(call assert_boolean,LOAD_IMAGE_V2))
 $(eval $(call assert_boolean,ENABLE_RUNTIME_INSTRUMENTATION))
-
+$(eval $(call assert_boolean,ERROR_DEPRECATED))
+$(eval $(call assert_boolean,GENERATE_COT))
+$(eval $(call assert_boolean,LOAD_IMAGE_V2))
+$(eval $(call assert_boolean,NS_TIMER_SWITCH))
+$(eval $(call assert_boolean,PL011_GENERIC_UART))
+$(eval $(call assert_boolean,PROGRAMMABLE_RESET_ADDRESS))
+$(eval $(call assert_boolean,PSCI_EXTENDED_STATE_ID))
+$(eval $(call assert_boolean,RESET_TO_BL31))
+$(eval $(call assert_boolean,SAVE_KEYS))
+$(eval $(call assert_boolean,SEPARATE_CODE_AND_RODATA))
+$(eval $(call assert_boolean,SPIN_ON_BL1_EXIT))
+$(eval $(call assert_boolean,TRUSTED_BOARD_BOOT))
+$(eval $(call assert_boolean,USE_COHERENT_MEM))
 
 ################################################################################
 # Add definitions to the cpp preprocessor based on the current build options.
@@ -481,30 +408,31 @@ $(eval $(call assert_boolean,ENABLE_RUNTIME_INSTRUMENTATION))
 # platform to overwrite the default options
 ################################################################################
 
-$(eval $(call add_define,PLAT_${PLAT}))
-$(eval $(call add_define,SPD_${SPD}))
-$(eval $(call add_define,NS_TIMER_SWITCH))
-$(eval $(call add_define,RESET_TO_BL31))
-$(eval $(call add_define,CTX_INCLUDE_FPREGS))
-$(eval $(call add_define,CTX_INCLUDE_AARCH32_REGS))
-$(eval $(call add_define,ARM_GIC_ARCH))
 $(eval $(call add_define,ARM_CCI_PRODUCT_ID))
+$(eval $(call add_define,ARM_GIC_ARCH))
 $(eval $(call add_define,ASM_ASSERTION))
-$(eval $(call add_define,LOG_LEVEL))
-$(eval $(call add_define,USE_COHERENT_MEM))
-$(eval $(call add_define,TRUSTED_BOARD_BOOT))
-$(eval $(call add_define,PROGRAMMABLE_RESET_ADDRESS))
 $(eval $(call add_define,COLD_BOOT_SINGLE_CPU))
-$(eval $(call add_define,PSCI_EXTENDED_STATE_ID))
-$(eval $(call add_define,ERROR_DEPRECATED))
+$(eval $(call add_define,CTX_INCLUDE_AARCH32_REGS))
+$(eval $(call add_define,CTX_INCLUDE_FPREGS))
 $(eval $(call add_define,ENABLE_PLAT_COMPAT))
-$(eval $(call add_define,SPIN_ON_BL1_EXIT))
-$(eval $(call add_define,PL011_GENERIC_UART))
 $(eval $(call add_define,ENABLE_PMF))
 $(eval $(call add_define,ENABLE_PSCI_STAT))
-$(eval $(call add_define,SEPARATE_CODE_AND_RODATA))
-$(eval $(call add_define,LOAD_IMAGE_V2))
 $(eval $(call add_define,ENABLE_RUNTIME_INSTRUMENTATION))
+$(eval $(call add_define,ERROR_DEPRECATED))
+$(eval $(call add_define,LOAD_IMAGE_V2))
+$(eval $(call add_define,LOG_LEVEL))
+$(eval $(call add_define,NS_TIMER_SWITCH))
+$(eval $(call add_define,PL011_GENERIC_UART))
+$(eval $(call add_define,PLAT_${PLAT}))
+$(eval $(call add_define,PROGRAMMABLE_RESET_ADDRESS))
+$(eval $(call add_define,PSCI_EXTENDED_STATE_ID))
+$(eval $(call add_define,RESET_TO_BL31))
+$(eval $(call add_define,SEPARATE_CODE_AND_RODATA))
+$(eval $(call add_define,SPD_${SPD}))
+$(eval $(call add_define,SPIN_ON_BL1_EXIT))
+$(eval $(call add_define,TRUSTED_BOARD_BOOT))
+$(eval $(call add_define,USE_COHERENT_MEM))
+
 # Define the EL3_PAYLOAD_BASE flag only if it is provided.
 ifdef EL3_PAYLOAD_BASE
         $(eval $(call add_define,EL3_PAYLOAD_BASE))

diff --git a/make_helpers/defaults.mk b/make_helpers/defaults.mk
new file mode 100644 (file)
index 0000000..fc39819
--- /dev/null
+++ b/make_helpers/defaults.mk
@@ -0,0 +1,142 @@
+#
+# Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# Redistributions of source code must retain the above copyright notice, this
+# list of conditions and the following disclaimer.
+#
+# Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# Neither the name of ARM nor the names of its contributors may be used
+# to endorse or promote products derived from this software without specific
+# prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Default, static values for build variables, listed in alphabetic order.
+# Dependencies between build options, if any, are handled in the top-level
+# Makefile, after this file is included. This ensures that the former is better
+# poised to handle dependencies, as all build variables would have a default
+# value by then.
+
+# The AArch32 Secure Payload to be built as BL32 image
+AARCH32_SP                     := none
+
+# The Target build architecture. Supported values are: aarch64, aarch32.
+ARCH                           := aarch64
+
+# Determine the version of ARM CCI product used in the platform. The platform
+# port can change this value if needed.
+ARM_CCI_PRODUCT_ID             := 400
+
+# Determine the version of ARM GIC architecture to use for interrupt management
+# in EL3. The platform port can change this value if needed.
+ARM_GIC_ARCH                   := 2
+
+# Flag used to indicate if ASM_ASSERTION should be enabled for the build.
+ASM_ASSERTION                  := 0
+
+# Base commit to perform code check on
+BASE_COMMIT                    := origin/master
+
+# By default, consider that the platform may release several CPUs out of reset.
+# The platform Makefile is free to override this value.
+COLD_BOOT_SINGLE_CPU           := 0
+
+# For Chain of Trust
+CREATE_KEYS                    := 1
+
+# Build flag to include AArch32 registers in cpu context save and restore during
+# world switch. This flag must be set to 0 for AArch64-only platforms.
+CTX_INCLUDE_AARCH32_REGS       := 1
+
+# Include FP registers in cpu context
+CTX_INCLUDE_FPREGS             := 0
+
+# Debug build
+DEBUG                          := 0
+
+# Build platform
+DEFAULT_PLAT                   := fvp
+
+# By default, use the -pedantic option in the gcc command line
+DISABLE_PEDANTIC               := 0
+
+# Flag to enable Performance Measurement Framework
+ENABLE_PMF                     := 0
+
+# Flag to enable PSCI STATs functionality
+ENABLE_PSCI_STAT               := 0
+
+# Flag to enable runtime instrumentation using PMF
+ENABLE_RUNTIME_INSTRUMENTATION := 0
+
+# Build flag to treat usage of deprecated platform and framework APIs as error.
+ERROR_DEPRECATED               := 0
+
+# Default FIP file name
+FIP_NAME                       := fip.bin
+
+# Default FWU_FIP file name
+FWU_FIP_NAME                   := fwu_fip.bin
+
+# For Chain of Trust
+GENERATE_COT                   := 0
+
+# Flag to enable new version of image loading
+LOAD_IMAGE_V2                  := 0
+
+# NS timer register save and restore
+NS_TIMER_SWITCH                        := 0
+
+# Build PL011 UART driver in minimal generic UART mode
+PL011_GENERIC_UART             := 0
+
+# By default, consider that the platform's reset address is not programmable.
+# The platform Makefile is free to override this value.
+PROGRAMMABLE_RESET_ADDRESS     := 0
+
+# Flag used to choose the power state format viz Extended State-ID or the
+# Original format.
+PSCI_EXTENDED_STATE_ID         := 0
+
+# By default, BL1 acts as the reset handler, not BL31
+RESET_TO_BL31                  := 0
+
+# For Chain of Trust
+SAVE_KEYS                      := 0
+
+# Whether code and read-only data should be put on separate memory pages. The
+# platform Makefile is free to override this value.
+SEPARATE_CODE_AND_RODATA       := 0
+
+# SPD choice
+SPD                            := none
+
+# Flag to introduce an infinite loop in BL1 just before it exits into the next
+# image. This is meant to help debugging the post-BL2 phase.
+SPIN_ON_BL1_EXIT               := 0
+
+# Flags to build TF with Trusted Boot support
+TRUSTED_BOARD_BOOT             := 0
+
+# Build option to choose whether Trusted firmware uses Coherent memory or not.
+USE_COHERENT_MEM               := 1
+
+# Build verbosity
+V                              := 0