prompt "CPU"
default BF533
+config BF512
+ bool "BF512"
+ help
+ BF512 Processor Support.
+
+config BF514
+ bool "BF514"
+ help
+ BF514 Processor Support.
+
+config BF516
+ bool "BF516"
+ help
+ BF516 Processor Support.
+
+config BF518
+ bool "BF518"
+ help
+ BF518 Processor Support.
+
config BF522
bool "BF522"
help
config BF_REV_MIN
int
- default 0 if (BF52x || BF54x)
+ default 0 if (BF51x || BF52x || BF54x)
default 2 if (BF537 || BF536 || BF534)
default 3 if (BF561 ||BF533 || BF532 || BF531)
- default 4 if (BF538 || BF539)
+ default 4 if (BF538 || BF539)
config BF_REV_MAX
int
- default 2 if (BF52x || BF54x)
+ default 2 if (BF51x || BF52x || BF54x)
default 3 if (BF537 || BF536 || BF534)
- default 5 if (BF561|| BF538 || BF539)
+ default 5 if (BF561 || BF538 || BF539)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
- default BF_REV_0_1 if (BF52x || BF54x)
+ default BF_REV_0_1 if (BF51x || BF52x || BF54x)
default BF_REV_0_2 if (BF534 || BF536 || BF537)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
config BF_REV_0_0
bool "0.0"
- depends on (BF52x || BF54x)
+ depends on (BF51x || BF52x || BF54x)
config BF_REV_0_1
bool "0.1"
endchoice
+config BF51x
+ bool
+ depends on (BF512 || BF514 || BF516 || BF518)
+ default y
+
config BF52x
bool
depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
default y
+source "arch/blackfin/mach-bf518/Kconfig"
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
#
config MAX_VCO_HZ
int
+ default 400000000 if BF512
+ default 400000000 if BF514
+ default 400000000 if BF516
+ default 400000000 if BF518
default 600000000 if BF522
default 400000000 if BF523
default 400000000 if BF524
config PM_BFIN_WAKE_PH6
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
- depends on PM && (BF52x || BF534 || BF536 || BF537)
+ depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
default n
help
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
KBUILD_DEFCONFIG := BF537-STAMP_defconfig
# setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF512) := bf518
+machine-$(CONFIG_BF514) := bf518
+machine-$(CONFIG_BF516) := bf518
+machine-$(CONFIG_BF518) := bf518
machine-$(CONFIG_BF522) := bf527
machine-$(CONFIG_BF523) := bf527
machine-$(CONFIG_BF524) := bf527
MACHINE := $(machine-y)
export MACHINE
+cpu-$(CONFIG_BF512) := bf512
+cpu-$(CONFIG_BF514) := bf514
+cpu-$(CONFIG_BF516) := bf516
+cpu-$(CONFIG_BF518) := bf518
cpu-$(CONFIG_BF522) := bf522
cpu-$(CONFIG_BF523) := bf523
cpu-$(CONFIG_BF524) := bf524
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.5
+# Thu Oct 23 21:38:19 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+CONFIG_BF518=y
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=0
+CONFIG_BF_REV_MAX=2
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF51x=y
+CONFIG_BFIN518F_EZBRD=y
+
+#
+# BF518 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF518_SPORT0_PORTF is not set
+CONFIG_BF518_SPORT0_PORTG=y
+CONFIG_BF518_SPORT0_TSCLK_PG10=y
+# CONFIG_BF518_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF518_UART1_PORTF=y
+# CONFIG_BF518_UART1_PORTG is not set
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_PTP_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI0=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI0_ERROR=7
+CONFIG_IRQ_SPI1_ERROR=7
+CONFIG_IRQ_RSI_INT0=7
+CONFIG_IRQ_RSI_INT1=7
+CONFIG_IRQ_PWM_TRIP=10
+CONFIG_IRQ_PWM_SYNC=10
+CONFIG_IRQ_PTP_STAT=10
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+CONFIG_ROM_BASE=0x20040000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_TWI_KEYPAD is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART1 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=y
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_DEBUG_VERBOSE=y
+CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_DOUBLEFAULT is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#define PERIPHERAL_USAGE 1
#define GPIO_USAGE 0
+#if defined(BF518_FAMILY)
+#define MAX_BLACKFIN_GPIOS 40
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PG0 16
+#define GPIO_PG1 17
+#define GPIO_PG2 18
+#define GPIO_PG3 19
+#define GPIO_PG4 20
+#define GPIO_PG5 21
+#define GPIO_PG6 22
+#define GPIO_PG7 23
+#define GPIO_PG8 24
+#define GPIO_PG9 25
+#define GPIO_PG10 26
+#define GPIO_PG11 27
+#define GPIO_PG12 28
+#define GPIO_PG13 29
+#define GPIO_PG14 30
+#define GPIO_PG15 31
+#define GPIO_PH0 32
+#define GPIO_PH1 33
+#define GPIO_PH2 34
+#define GPIO_PH3 35
+#define GPIO_PH4 36
+#define GPIO_PH5 37
+#define GPIO_PH6 38
+#define GPIO_PH7 39
+
+#define PORT_F GPIO_PF0
+#define PORT_G GPIO_PG0
+#define PORT_H GPIO_PH0
+
+#endif
+
+
#ifdef BF533_FAMILY
#define MAX_BLACKFIN_GPIOS 16
};
#endif
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
(struct gpio_port_t *) PORTFIO,
(struct gpio_port_t *) PORTGIO,
};
#endif
-#ifdef BF527_FAMILY
+#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
static unsigned short *port_mux[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
(unsigned short *) PORTF_MUX,
(unsigned short *) PORTG_MUX,
static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INTB};
#endif
-#ifdef BF527_FAMILY
+#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB};
#endif
return -EINVAL;
}
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
static void port_setup(unsigned gpio, unsigned short usage)
{
if (!check_gpio(gpio)) {
return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
}
-#elif defined(BF527_FAMILY)
+#elif defined(BF527_FAMILY) || defined(BF518_FAMILY)
inline void portmux_setup(unsigned short portno, unsigned short function)
{
u16 pmux, ident = P_IDENT(portno);
gpio_bankb[bank]->maskb = 0;
if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].fer = *port_fer[bank];
#endif
gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen;
bank = gpio_bank(i);
if (mask) {
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
*port_fer[bank] = gpio_bank_saved[bank].fer;
#endif
gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen;
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].fer = *port_fer[bank];
-#ifdef BF527_FAMILY
+#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
gpio_bank_saved[bank].mux = *port_mux[bank];
#else
if (bank == 0)
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
bank = gpio_bank(i);
-#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
-#ifdef BF527_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY)
+#if defined(BF527_FAMILY) || defined(BF518_FAMILY)
*port_mux[bank] = gpio_bank_saved[bank].mux;
#else
if (bank == 0)
--- /dev/null
+if (BF51x)
+
+source "arch/blackfin/mach-bf518/boards/Kconfig"
+
+menu "BF518 Specific Configuration"
+
+comment "Alternative Multiplexing Scheme"
+
+choice
+ prompt "SPORT0"
+ default BF518_SPORT0_PORTG
+ help
+ Select PORT used for SPORT0. See Hardware Reference Manual
+
+config BF518_SPORT0_PORTF
+ bool "PORT F"
+ help
+ PORT F
+
+config BF518_SPORT0_PORTG
+ bool "PORT G"
+ help
+ PORT G
+endchoice
+
+choice
+ prompt "SPORT0 TSCLK Location"
+ depends on BF518_SPORT0_PORTG
+ default BF518_SPORT0_TSCLK_PG10
+ help
+ Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual
+
+config BF518_SPORT0_TSCLK_PG10
+ bool "PORT PG10"
+ help
+ PORT PG10
+
+config BF518_SPORT0_TSCLK_PG14
+ bool "PORT PG14"
+ help
+ PORT PG14
+endchoice
+
+choice
+ prompt "UART1"
+ default BF518_UART1_PORTF
+ help
+ Select PORT used for UART1. See Hardware Reference Manual
+
+config BF518_UART1_PORTF
+ bool "PORT F"
+ help
+ PORT F
+
+config BF518_UART1_PORTG
+ bool "PORT G"
+ help
+ PORT G
+endchoice
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "IRQ_PLL_WAKEUP"
+ default 7
+config IRQ_DMA0_ERROR
+ int "IRQ_DMA0_ERROR"
+ default 7
+config IRQ_DMAR0_BLK
+ int "IRQ_DMAR0_BLK"
+ default 7
+config IRQ_DMAR1_BLK
+ int "IRQ_DMAR1_BLK"
+ default 7
+config IRQ_DMAR0_OVR
+ int "IRQ_DMAR0_OVR"
+ default 7
+config IRQ_DMAR1_OVR
+ int "IRQ_DMAR1_OVR"
+ default 7
+config IRQ_PPI_ERROR
+ int "IRQ_PPI_ERROR"
+ default 7
+config IRQ_MAC_ERROR
+ int "IRQ_MAC_ERROR"
+ default 7
+config IRQ_SPORT0_ERROR
+ int "IRQ_SPORT0_ERROR"
+ default 7
+config IRQ_SPORT1_ERROR
+ int "IRQ_SPORT1_ERROR"
+ default 7
+config IRQ_PTP_ERROR
+ int "IRQ_PTP_ERROR"
+ default 7
+config IRQ_UART0_ERROR
+ int "IRQ_UART0_ERROR"
+ default 7
+config IRQ_UART1_ERROR
+ int "IRQ_UART1_ERROR"
+ default 7
+config IRQ_RTC
+ int "IRQ_RTC"
+ default 8
+config IRQ_PPI
+ int "IRQ_PPI"
+ default 8
+config IRQ_SPORT0_RX
+ int "IRQ_SPORT0_RX"
+ default 9
+config IRQ_SPORT0_TX
+ int "IRQ_SPORT0_TX"
+ default 9
+config IRQ_SPORT1_RX
+ int "IRQ_SPORT1_RX"
+ default 9
+config IRQ_SPORT1_TX
+ int "IRQ_SPORT1_TX"
+ default 9
+config IRQ_TWI
+ int "IRQ_TWI"
+ default 10
+config IRQ_SPI0
+ int "IRQ_SPI"
+ default 10
+config IRQ_UART0_RX
+ int "IRQ_UART0_RX"
+ default 10
+config IRQ_UART0_TX
+ int "IRQ_UART0_TX"
+ default 10
+config IRQ_UART1_RX
+ int "IRQ_UART1_RX"
+ default 10
+config IRQ_UART1_TX
+ int "IRQ_UART1_TX"
+ default 10
+config IRQ_OPTSEC
+ int "IRQ_OPTSEC"
+ default 11
+config IRQ_CNT
+ int "IRQ_CNT"
+ default 11
+config IRQ_MAC_RX
+ int "IRQ_MAC_RX"
+ default 11
+config IRQ_PORTH_INTA
+ int "IRQ_PORTH_INTA"
+ default 11
+config IRQ_MAC_TX
+ int "IRQ_MAC_TX/NFC"
+ default 11
+config IRQ_PORTH_INTB
+ int "IRQ_PORTH_INTB"
+ default 11
+config IRQ_TMR0
+ int "IRQ_TMR0"
+ default 12
+config IRQ_TMR1
+ int "IRQ_TMR1"
+ default 12
+config IRQ_TMR2
+ int "IRQ_TMR2"
+ default 12
+config IRQ_TMR3
+ int "IRQ_TMR3"
+ default 12
+config IRQ_TMR4
+ int "IRQ_TMR4"
+ default 12
+config IRQ_TMR5
+ int "IRQ_TMR5"
+ default 12
+config IRQ_TMR6
+ int "IRQ_TMR6"
+ default 12
+config IRQ_TMR7
+ int "IRQ_TMR7"
+ default 12
+config IRQ_PORTG_INTA
+ int "IRQ_PORTG_INTA"
+ default 12
+config IRQ_PORTG_INTB
+ int "IRQ_PORTG_INTB"
+ default 12
+config IRQ_MEM_DMA0
+ int "IRQ_MEM_DMA0"
+ default 13
+config IRQ_MEM_DMA1
+ int "IRQ_MEM_DMA1"
+ default 13
+config IRQ_WATCH
+ int "IRQ_WATCH"
+ default 13
+config IRQ_PORTF_INTA
+ int "IRQ_PORTF_INTA"
+ default 13
+config IRQ_PORTF_INTB
+ int "IRQ_PORTF_INTB"
+ default 13
+config IRQ_SPI0_ERROR
+ int "IRQ_SPI0_ERROR"
+ default 7
+config IRQ_SPI1_ERROR
+ int "IRQ_SPI1_ERROR"
+ default 7
+config IRQ_RSI_INT0
+ int "IRQ_RSI_INT0"
+ default 7
+config IRQ_RSI_INT1
+ int "IRQ_RSI_INT1"
+ default 7
+config IRQ_PWM_TRIP
+ int "IRQ_PWM_TRIP"
+ default 10
+config IRQ_PWM_SYNC
+ int "IRQ_PWM_SYNC"
+ default 10
+config IRQ_PTP_STAT
+ int "IRQ_PTP_STAT"
+ default 10
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+endmenu
+
+endif
--- /dev/null
+#
+# arch/blackfin/mach-bf518/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o dma.o
--- /dev/null
+choice
+ prompt "System type"
+ default BFIN518F_EZBRD
+ help
+ Select your board!
+
+config BFIN518F_EZBRD
+ bool "BF518F-EZBRD"
+ help
+ BF518-EZBRD board support.
+
+endchoice
--- /dev/null
+#
+# arch/blackfin/mach-bf518/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN518F_EZBRD) += ezbrd.o
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf518/boards/ezbrd.c
+ * Based on: arch/blackfin/mach-bf527/boards/ezbrd.c
+ * Author: Bryan Wu <cooloney@kernel.org>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BF518F-EZBRD";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezbrd_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0x1C0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data ezbrd_flash_data = {
+ .width = 2,
+ .parts = ezbrd_partitions,
+ .nr_parts = ARRAY_SIZE(ezbrd_partitions),
+};
+
+static struct resource ezbrd_flash_resource = {
+ .start = 0x20000000,
+ .end = 0x203fffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezbrd_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ezbrd_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &ezbrd_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+ .ctl_reg = 0x4, /* send zero */
+ .enable_dma = 0,
+ .bits_per_word = 8,
+ .cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+ .model = 7877,
+ .vref_delay_usecs = 50, /* internal, no capacitor */
+ .x_plate_ohms = 419,
+ .y_plate_ohms = 486,
+ .pressure_max = 1000,
+ .pressure_min = 0,
+ .stopacq_polarity = 1,
+ .first_conversion_delay = 3,
+ .acquisition_time = 1,
+ .averaging = 1,
+ .pen_down_acc_interval = 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+ || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+ || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_PBX)
+ {
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J11_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 8 - CONFIG_J19_JUMPER,
+ .controller_data = &spi_si3xxx_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+ {
+ .modalias = "ad7877",
+ .platform_data = &bfin_ad7877_ts_info,
+ .irq = IRQ_PF8,
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 2,
+ .controller_data = &spi_ad7877_chip_info,
+ },
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+ && defined(CONFIG_SND_SOC_WM8731_SPI)
+ {
+ .modalias = "wm8731",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 5,
+ .controller_data = &spi_wm8731_chip_info,
+ .mode = SPI_MODE_0,
+ },
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
+#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
+ {
+ .modalias = "bfin-lq035q1-spi",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &lq035q1_spi_chip_info,
+ .mode = SPI_CPHA | SPI_CPOL,
+ },
+#endif
+};
+
+/* SPI controller data */
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 5,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI0,
+ .end = CH_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+
+/* SPI (1) */
+static struct bfin5xx_spi_master bfin_spi1_info = {
+ .num_chipselect = 5,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
+static struct resource bfin_spi1_resource[] = {
+ [0] = {
+ .start = SPI1_REGBASE,
+ .end = SPI1_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI1,
+ .end = CH_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_spi1_device = {
+ .name = "bfin-spi",
+ .id = 1, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi1_resource),
+ .resource = bfin_spi1_resource,
+ .dev = {
+ .platform_data = &bfin_spi1_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+ },
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+ {
+ I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+ .irq = IRQ_PF8,
+ },
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_100, 400000000),
+ VRPAIR(VLEV_105, 426000000),
+ VRPAIR(VLEV_110, 500000000),
+ VRPAIR(VLEV_115, 533000000),
+ VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+ &bfin_spi1_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezbrd_flash_device,
+#endif
+
+ &bfin_gpios_device,
+};
+
+static int __init ezbrd_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+ platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ return 0;
+}
+
+arch_initcall(ezbrd_init);
+
+void native_machine_restart(char *cmd)
+{
+ /* workaround reboot hang when booting from SPI */
+ if ((bfin_read_SYSCR() & 0x7) == 0x3)
+ bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+ /* the MAC is stored in OTP memory page 0xDF */
+ u32 ret;
+ u64 otp_mac;
+ u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
+
+ ret = otp_read(0xDF, 0x00, &otp_mac);
+ if (!(ret & 0x1)) {
+ char *otp_mac_p = (char *)&otp_mac;
+ for (ret = 0; ret < 6; ++ret)
+ addr[ret] = otp_mac_p[5 - ret];
+ }
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf518/dma.c
+ * Based on:
+ * Author: Bryan Wu <cooloney@kernel.org>
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA11_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+};
+EXPORT_SYMBOL(dma_io_base_addr);
+
+int channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI:
+ ret_irq = IRQ_PPI;
+ break;
+
+ case CH_EMAC_RX:
+ ret_irq = IRQ_MAC_RX;
+ break;
+
+ case CH_EMAC_TX:
+ ret_irq = IRQ_MAC_TX;
+ break;
+
+ case CH_UART1_RX:
+ ret_irq = IRQ_UART1_RX;
+ break;
+
+ case CH_UART1_TX:
+ ret_irq = IRQ_UART1_TX;
+ break;
+
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+
+ case CH_SPI0:
+ ret_irq = IRQ_SPI0;
+ break;
+
+ case CH_UART0_RX:
+ ret_irq = IRQ_UART0_RX;
+ break;
+
+ case CH_UART0_TX:
+ ret_irq = IRQ_UART0_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf518/head.S
+ * Based on: arch/blackfin/mach-bf527/head.S
+ * Author: Bryan Wu <cooloney@kernel.org>
+ *
+ * Created: 2008
+ * Description: Startup code for Blackfin BF51x
+ *
+ * Modified:
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach-common/clocks.h>
+#include <asm/mach/mem_init.h>
+#endif
+
+.section .l1.text
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+
+ /* Enable PHY CLK buffer output */
+ p0.h = hi(VR_CTL);
+ p0.l = lo(VR_CTL);
+ r0.l = w[p0];
+ bitset(r0, 14);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.h = hi(SIC_IWR0);
+ p0.l = lo(SIC_IWR0);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ ssync;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ ssync;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ RTS;
+ENDPROC(_start_dma_code)
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ * - ????
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* False Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Lockbox SESR Firmware Does Not Save/Restore Full Context */
+#define ANOMALY_05000405 (1)
+/* Lockbox Firmware Memory Cleanup Routine Does not Clear Registers */
+#define ANOMALY_05000408 (1)
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
+/* TWI Fall Time (Tof) May Violate the Minimum I2C Specification */
+#define ANOMALY_05000421 (1)
+/* TWI Input Capacitance (Ci) May Violate the Maximum I2C Specification */
+#define ANOMALY_05000422 (1)
+/* Speculative Fetches of Indirect-Pointer Instructions Can Cause False Hardware Errors */
+#define ANOMALY_05000426 (1)
+/* Software System Reset Corrupts PLL_LOCKCNT Register */
+#define ANOMALY_05000430 (1)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (1)
+/* Certain SIC Registers are not Reset After Soft or Core Double Fault Reset */
+#define ANOMALY_05000435 (1)
+/* PORTx_DRIVE and PORTx_HYSTERESIS Registers Read Back Incorrect Values */
+#define ANOMALY_05000438 (1)
+/* Preboot Cannot be Used to Program the PLL_DIV Register */
+#define ANOMALY_05000439 (1)
+/* bfrom_SysControl() Cannot be Used to Write the PLL_DIV Register */
+#define ANOMALY_05000440 (1)
+/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
+#define ANOMALY_05000443 (1)
+/* Incorrect L1 Instruction Bank B Memory Map Location */
+#define ANOMALY_05000444 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000285 (0)
+#define ANOMALY_05000307 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000312 (0)
+#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (0)
+#define ANOMALY_05000363 (0)
+#define ANOMALY_05000386 (0)
+
+#endif
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/bf518.h
+ * Based on: include/asm-blackfin/mach-bf527/bf527.h
+ * Author: Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * Created:
+ * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MACH_BF518_H__
+#define __MACH_BF518_H__
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15 0x8000
+#define IMASK_IVG14 0x4000
+#define IMASK_IVG13 0x2000
+#define IMASK_IVG12 0x1000
+
+#define IMASK_IVG11 0x0800
+#define IMASK_IVG10 0x0400
+#define IMASK_IVG9 0x0200
+#define IMASK_IVG8 0x0100
+
+#define IMASK_IVG7 0x0080
+#define IMASK_IVGTMR 0x0040
+#define IMASK_IVGHW 0x0020
+
+/***************************/
+
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
+
+#define WAY0_L 0x1
+#define WAY1_L 0x2
+#define WAY01_L 0x3
+#define WAY2_L 0x4
+#define WAY02_L 0x5
+#define WAY12_L 0x6
+#define WAY012_L 0x7
+
+#define WAY3_L 0x8
+#define WAY03_L 0x9
+#define WAY13_L 0xA
+#define WAY013_L 0xB
+
+#define WAY32_L 0xC
+#define WAY320_L 0xD
+#define WAY321_L 0xE
+#define WAYALL_L 0xF
+
+#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+#ifdef CONFIG_C_CDPRIO
+#define V_CDPRIO 0x100
+#else
+#define V_CDPRIO 0x0
+#endif
+
+#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO)
+
+#ifdef CONFIG_BF518
+#define CPU "BF518"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF516
+#define CPU "BF516"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF514
+#define CPU "BF514"
+#define CPUID 0x27e8
+#endif
+#ifdef CONFIG_BF512
+#define CPU "BF512"
+#define CPUID 0x27e8
+#endif
+
+#ifndef CPU
+#error "Unknown CPU type - This kernel doesn't seem to be configured properly"
+#endif
+
+#endif /* __MACH_BF518_H__ */
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf518/bfin_serial_5xx.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * blackfin serial driver head file
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER))
+#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR))
+#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v)
+#define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v)
+#define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v)
+#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v))
+#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v))
+#define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v)
+#define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v)
+#define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v)
+
+#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
+#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+# define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+# define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+# define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+# define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+
+#define BFIN_UART_TX_FIFO_SIZE 2
+
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+ struct uart_port port;
+ unsigned int old_status;
+ unsigned int lsr;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ int tx_done;
+ int tx_count;
+ struct circ_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+ struct work_struct tx_dma_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ struct timer_list cts_timer;
+ int cts_pin;
+ int rts_pin;
+#endif
+};
+
+/* The hardware clears the LSR bits upon read, so we need to cache
+ * some of the more fun bits in software so they don't get lost
+ * when checking the LSR in other code paths (TX).
+ */
+static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart)
+{
+ unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR);
+ uart->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | uart->lsr;
+}
+
+static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart)
+{
+ uart->lsr = 0;
+ bfin_write16(uart->port.membase + OFFSET_LSR, -1);
+}
+
+struct bfin_serial_res {
+ unsigned long uart_base_addr;
+ int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ unsigned int uart_tx_dma_channel;
+ unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int uart_cts_pin;
+ int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ 0xFFC00400,
+ IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART0_TX,
+ CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ CONFIG_UART0_CTS_PIN,
+ CONFIG_UART0_RTS_PIN,
+#endif
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ 0xFFC02000,
+ IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART1_TX,
+ CH_UART1_RX,
+#endif
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+ CONFIG_UART1_CTS_PIN,
+ CONFIG_UART1_RTS_PIN,
+#endif
+ },
+#endif
+};
+
+#define DRIVER_NAME "bfin-uart"
--- /dev/null
+/*
+ * Blackfin Infra-red Driver
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
+#include <linux/serial.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR)
+#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL)
+#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER)
+#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH)
+#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR)
+#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR)
+#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL)
+
+#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v)
+#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v)
+#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v)
+#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v)
+#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v)
+#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v)
+
+#ifdef CONFIG_SIR_BFIN_DMA
+struct dma_rx_buf {
+ char *buf;
+ int head;
+ int tail;
+ };
+#endif /* CONFIG_SIR_BFIN_DMA */
+
+struct bfin_sir_port {
+ unsigned char __iomem *membase;
+ unsigned int irq;
+ unsigned int lsr;
+ unsigned long clk;
+ struct net_device *dev;
+#ifdef CONFIG_SIR_BFIN_DMA
+ int tx_done;
+ struct dma_rx_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+#endif /* CONFIG_SIR_BFIN_DMA */
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+};
+
+struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS];
+
+struct bfin_sir_port_res {
+ unsigned long base_addr;
+ int irq;
+ unsigned int rx_dma_channel;
+ unsigned int tx_dma_channel;
+};
+
+struct bfin_sir_port_res bfin_sir_port_resource[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ 0xFFC00400,
+ IRQ_UART0_RX,
+ CH_UART0_RX,
+ CH_UART0_TX,
+ },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ {
+ 0xFFC02000,
+ IRQ_UART1_RX,
+ CH_UART1_RX,
+ CH_UART1_TX,
+ },
+#endif
+};
+
+int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource);
+
+struct bfin_sir_self {
+ struct bfin_sir_port *sir_port;
+ spinlock_t lock;
+ unsigned int open;
+ int speed;
+ int newspeed;
+
+ struct sk_buff *txskb;
+ struct sk_buff *rxskb;
+ struct net_device_stats stats;
+ struct device *dev;
+ struct irlap_cb *irlap;
+ struct qos_info qos;
+
+ iobuff_t tx_buff;
+ iobuff_t rx_buff;
+
+ struct work_struct work;
+ int mtt;
+};
+
+static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port)
+{
+ unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR);
+ port->lsr |= (lsr & (BI|FE|PE|OE));
+ return lsr | port->lsr;
+}
+
+static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port)
+{
+ port->lsr = 0;
+ bfin_read16(port->membase + OFFSET_LSR);
+}
+
+#define DRIVER_NAME "bfin_sir"
+
+static int bfin_sir_hw_init(void)
+{
+ int ret = -ENODEV;
+#ifdef CONFIG_BFIN_SIR0
+ ret = peripheral_request(P_UART0_TX, DRIVER_NAME);
+ if (ret)
+ return ret;
+ ret = peripheral_request(P_UART0_RX, DRIVER_NAME);
+ if (ret)
+ return ret;
+#endif
+
+#ifdef CONFIG_BFIN_SIR1
+ ret = peripheral_request(P_UART1_TX, DRIVER_NAME);
+ if (ret)
+ return ret;
+ ret = peripheral_request(P_UART1_RX, DRIVER_NAME);
+ if (ret)
+ return ret;
+#endif
+ return ret;
+}
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF518_FAMILY
+
+#include "bf518.h"
+#include "mem_map.h"
+#include "defBF512.h"
+#include "anomaly.h"
+
+#if defined(CONFIG_BF518)
+#include "defBF518.h"
+#endif
+
+#if defined(CONFIG_BF516)
+#include "defBF516.h"
+#endif
+
+#if defined(CONFIG_BF514)
+#include "defBF514.h"
+#endif
+
+#if defined(CONFIG_BF512)
+#include "defBF512.h"
+#endif
+
+#if !defined(__ASSEMBLY__)
+#include "cdefBF512.h"
+
+#if defined(CONFIG_BF518)
+#include "cdefBF518.h"
+#endif
+
+#if defined(CONFIG_BF516)
+#include "cdefBF516.h"
+#endif
+
+#if defined(CONFIG_BF514)
+#include "cdefBF514.h"
+#endif
+#endif
+
+/* UART_IIR Register */
+#define STATUS(x) ((x << 1) & 0x06)
+#define STATUS_P1 0x02
+#define STATUS_P0 0x01
+
+#define BFIN_UART_NR_PORTS 2
+
+#define OFFSET_THR 0x00 /* Transmit Holding register */
+#define OFFSET_RBR 0x00 /* Receive Buffer register */
+#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
+#define OFFSET_IER 0x04 /* Interrupt Enable Register */
+#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
+#define OFFSET_IIR 0x08 /* Interrupt Identification Register */
+#define OFFSET_LCR 0x0C /* Line Control Register */
+#define OFFSET_MCR 0x10 /* Modem Control Register */
+#define OFFSET_LSR 0x14 /* Line Status Register */
+#define OFFSET_MSR 0x18 /* Modem Status Register */
+#define OFFSET_SCR 0x1C /* SCR Scratch Register */
+#define OFFSET_GCTL 0x24 /* Global Control Register */
+
+/* DPMC*/
+#define bfin_read_STOPCK_OFF() bfin_read_STOPCK()
+#define bfin_write_STOPCK_OFF(val) bfin_write_STOPCK(val)
+#define STOPCK_OFF STOPCK
+
+/* PLL_DIV Masks */
+#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
+#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
+#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
+#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
+
+#endif
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/cdefbf512.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF512_H
+#define _CDEF_BF512_H
+
+/* include all Core registers and bit definitions */
+#include "defBF512.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF512 */
+
+/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "cdefBF51x_base.h"
+
+#endif /* _CDEF_BF512_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/cdefbf514.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF514_H
+#define _CDEF_BF514_H
+
+/* include all Core registers and bit definitions */
+#include "defBF514.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
+
+/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "cdefBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
+
+#endif /* _CDEF_BF514_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/cdefbf516.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF516_H
+#define _CDEF_BF516_H
+
+/* include all Core registers and bit definitions */
+#include "defBF516.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
+
+/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "cdefBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
+
+#endif /* _CDEF_BF516_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/cdefbf518.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: system mmr register map
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF518_H
+#define _CDEF_BF518_H
+
+/* include all Core registers and bit definitions */
+#include "defBF518.h"
+
+/* include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
+
+/* include cdefBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "cdefBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
+
+#endif /* _CDEF_BF518_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/cdefBF51x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _CDEF_BF52X_H
+#define _CDEF_BF52X_H
+
+#include <asm/system.h>
+#include <asm/blackfin.h>
+
+#include "defBF51x_base.h"
+
+/* Include core specific register pointer definitions */
+#include <asm/cdef_LPBlackfin.h>
+
+/* ==== begin from cdefBF534.h ==== */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL)
+/* Writing to PLL_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_PLL_CTL(unsigned int val)
+{
+ unsigned long flags, iwr0, iwr1;
+
+ if (val == bfin_read_PLL_CTL())
+ return;
+
+ local_irq_save(flags);
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr0 = bfin_read32(SIC_IWR0);
+ iwr1 = bfin_read32(SIC_IWR1);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+ bfin_write32(SIC_IWR1, 0);
+
+ bfin_write16(PLL_CTL, val);
+ SSYNC();
+ asm("IDLE;");
+
+ bfin_write32(SIC_IWR0, iwr0);
+ bfin_write32(SIC_IWR1, iwr1);
+ local_irq_restore(flags);
+}
+#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
+#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val)
+#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr0, iwr1;
+
+ if (val == bfin_read_VR_CTL())
+ return;
+
+ local_irq_save(flags);
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr0 = bfin_read32(SIC_IWR0);
+ iwr1 = bfin_read32(SIC_IWR1);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+ bfin_write32(SIC_IWR1, 0);
+
+ bfin_write16(VR_CTL, val);
+ SSYNC();
+ asm("IDLE;");
+
+ bfin_write32(SIC_IWR0, iwr0);
+ bfin_write32(SIC_IWR1, iwr1);
+ local_irq_restore(flags);
+}
+#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
+#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val)
+#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
+#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val)
+#define bfin_read_CHIPID() bfin_read32(CHIPID)
+#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val)
+
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define bfin_read_SWRST() bfin_read16(SWRST)
+#define bfin_write_SWRST(val) bfin_write16(SWRST, val)
+#define bfin_read_SYSCR() bfin_read16(SYSCR)
+#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val)
+
+#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT)
+#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val)
+#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0)
+#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val)
+#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 6))
+#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 6)), val)
+
+#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0)
+#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val)
+#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1)
+#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val)
+#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2)
+#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val)
+#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3)
+#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val)
+
+#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0)
+#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val)
+#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 6))
+#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 6)), val)
+
+#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0)
+#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val)
+#define bfin_read_SIC_IWR(x) bfin_read32(SIC_IWR0 + (x << 6))
+#define bfin_write_SIC_IWR(x, val) bfin_write32((SIC_IWR0 + (x << 6)), val)
+
+/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */
+
+#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1)
+#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val)
+#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4)
+#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val)
+#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5)
+#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val)
+#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6)
+#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val)
+#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7)
+#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val)
+#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1)
+#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val)
+#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1)
+#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val)
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL)
+#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val)
+#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT)
+#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val)
+#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT)
+#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val)
+
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT)
+#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val)
+#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL)
+#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val)
+#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT)
+#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val)
+#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT)
+#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val)
+#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM)
+#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val)
+#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST)
+#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST, val)
+#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN)
+#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val)
+
+
+/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
+#define bfin_read_UART0_THR() bfin_read16(UART0_THR)
+#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val)
+#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR)
+#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val)
+#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL)
+#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val)
+#define bfin_read_UART0_IER() bfin_read16(UART0_IER)
+#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val)
+#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH)
+#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val)
+#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR)
+#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val)
+#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR)
+#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val)
+#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR)
+#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val)
+#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR)
+#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val)
+#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR)
+#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val)
+#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR)
+#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val)
+#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL)
+#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val)
+
+
+/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
+#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL)
+#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val)
+#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG)
+#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val)
+#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT)
+#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val)
+#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR)
+#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val)
+#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR)
+#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val)
+#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD)
+#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val)
+#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW)
+#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val)
+
+
+/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
+#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG)
+#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val)
+#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER)
+#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val)
+#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD)
+#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val)
+#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH)
+#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val)
+
+#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG)
+#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val)
+#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER)
+#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val)
+#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD)
+#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val)
+#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH)
+#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val)
+
+#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG)
+#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val)
+#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER)
+#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val)
+#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD)
+#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val)
+#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH)
+#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val)
+
+#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG)
+#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val)
+#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER)
+#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val)
+#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD)
+#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val)
+#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH)
+#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val)
+
+#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG)
+#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val)
+#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER)
+#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val)
+#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD)
+#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val)
+#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH)
+#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val)
+
+#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG)
+#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val)
+#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER)
+#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val)
+#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD)
+#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val)
+#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH)
+#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val)
+
+#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG)
+#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val)
+#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER)
+#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val)
+#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD)
+#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val)
+#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH)
+#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val)
+
+#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG)
+#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val)
+#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER)
+#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val)
+#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD)
+#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val)
+#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH)
+#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val)
+
+#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE)
+#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val)
+#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE)
+#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val)
+#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS)
+#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val)
+
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
+#define bfin_read_PORTFIO() bfin_read16(PORTFIO)
+#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val)
+#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR)
+#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val)
+#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET)
+#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val)
+#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE)
+#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA)
+#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val)
+#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR)
+#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val)
+#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET)
+#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val)
+#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE)
+#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB)
+#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val)
+#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR)
+#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val)
+#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET)
+#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val)
+#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE)
+#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR)
+#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val)
+#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR)
+#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val)
+#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE)
+#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val)
+#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH)
+#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val)
+#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN)
+#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val)
+
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1)
+#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val)
+#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2)
+#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val)
+#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV)
+#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val)
+#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV)
+#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val)
+#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX)
+#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val)
+#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX)
+#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val)
+#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX32)
+#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX32, val)
+#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX32)
+#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX32, val)
+#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX16)
+#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX16, val)
+#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX16)
+#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX16, val)
+#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1)
+#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val)
+#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2)
+#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val)
+#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV)
+#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val)
+#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV)
+#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val)
+#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT)
+#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val)
+#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL)
+#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val)
+#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1)
+#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val)
+#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2)
+#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val)
+#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0)
+#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val)
+#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1)
+#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val)
+#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2)
+#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val)
+#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3)
+#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val)
+#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0)
+#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val)
+#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1)
+#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val)
+#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2)
+#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val)
+#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3)
+#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val)
+
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1)
+#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val)
+#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2)
+#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val)
+#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV)
+#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val)
+#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV)
+#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val)
+#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX)
+#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val)
+#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX)
+#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val)
+#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX32)
+#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX32, val)
+#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX32)
+#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX32, val)
+#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX16)
+#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX16, val)
+#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX16)
+#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX16, val)
+#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1)
+#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val)
+#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2)
+#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val)
+#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV)
+#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val)
+#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV)
+#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val)
+#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT)
+#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val)
+#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL)
+#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val)
+#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1)
+#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val)
+#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2)
+#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val)
+#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0)
+#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val)
+#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1)
+#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val)
+#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2)
+#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val)
+#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3)
+#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val)
+#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0)
+#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val)
+#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1)
+#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val)
+#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2)
+#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val)
+#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3)
+#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val)
+
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL)
+#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val)
+#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0)
+#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val)
+#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1)
+#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val)
+#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL)
+#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val)
+#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL)
+#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val)
+#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC)
+#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val)
+#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT)
+#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val)
+
+
+/* DMA Traffic Control Registers */
+#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER)
+#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val)
+#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT)
+#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val)
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER)
+#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER, val)
+#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT)
+#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT, val)
+
+/* DMA Controller */
+#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG)
+#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val)
+#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR)
+#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val)
+#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR)
+#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val)
+#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT)
+#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val)
+#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT)
+#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val)
+#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY)
+#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val)
+#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY)
+#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val)
+#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR)
+#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val)
+#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR)
+#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val)
+#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT)
+#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val)
+#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT)
+#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val)
+#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS)
+#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val)
+#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP)
+#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG)
+#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val)
+#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR)
+#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val)
+#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR)
+#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val)
+#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT)
+#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val)
+#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT)
+#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val)
+#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY)
+#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val)
+#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY)
+#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val)
+#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR)
+#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val)
+#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR)
+#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val)
+#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT)
+#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val)
+#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT)
+#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val)
+#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS)
+#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val)
+#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP)
+#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG)
+#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val)
+#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR)
+#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val)
+#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR)
+#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val)
+#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT)
+#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val)
+#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT)
+#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val)
+#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY)
+#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val)
+#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY)
+#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val)
+#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR)
+#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val)
+#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR)
+#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val)
+#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT)
+#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val)
+#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT)
+#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val)
+#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS)
+#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val)
+#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP)
+#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG)
+#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val)
+#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR)
+#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val)
+#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR)
+#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val)
+#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT)
+#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val)
+#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT)
+#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val)
+#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY)
+#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val)
+#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY)
+#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val)
+#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR)
+#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val)
+#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR)
+#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val)
+#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT)
+#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val)
+#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT)
+#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val)
+#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS)
+#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val)
+#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP)
+#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG)
+#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val)
+#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR)
+#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val)
+#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR)
+#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val)
+#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT)
+#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val)
+#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT)
+#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val)
+#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY)
+#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val)
+#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY)
+#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val)
+#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR)
+#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val)
+#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR)
+#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val)
+#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT)
+#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val)
+#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT)
+#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val)
+#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS)
+#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val)
+#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP)
+#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG)
+#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val)
+#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR)
+#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val)
+#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR)
+#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val)
+#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT)
+#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val)
+#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT)
+#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val)
+#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY)
+#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val)
+#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY)
+#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val)
+#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR)
+#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val)
+#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR)
+#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val)
+#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT)
+#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val)
+#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT)
+#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val)
+#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS)
+#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val)
+#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP)
+#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG)
+#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val)
+#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR)
+#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val)
+#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR)
+#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val)
+#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT)
+#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val)
+#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT)
+#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val)
+#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY)
+#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val)
+#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY)
+#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val)
+#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR)
+#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val)
+#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR)
+#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val)
+#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT)
+#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val)
+#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT)
+#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val)
+#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS)
+#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val)
+#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP)
+#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG)
+#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val)
+#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR)
+#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val)
+#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR)
+#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val)
+#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT)
+#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val)
+#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT)
+#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val)
+#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY)
+#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val)
+#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY)
+#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val)
+#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR)
+#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val)
+#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR)
+#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val)
+#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT)
+#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val)
+#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT)
+#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val)
+#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS)
+#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val)
+#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP)
+#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG)
+#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val)
+#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR)
+#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val)
+#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR)
+#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val)
+#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT)
+#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val)
+#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT)
+#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val)
+#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY)
+#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val)
+#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY)
+#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val)
+#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR)
+#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val)
+#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR)
+#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val)
+#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT)
+#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val)
+#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT)
+#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val)
+#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS)
+#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val)
+#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP)
+#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG)
+#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val)
+#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR)
+#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val)
+#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR)
+#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val)
+#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT)
+#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val)
+#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT)
+#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val)
+#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY)
+#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val)
+#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY)
+#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val)
+#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR)
+#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val)
+#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR)
+#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val)
+#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT)
+#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val)
+#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT)
+#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val)
+#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS)
+#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val)
+#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP)
+#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG)
+#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val)
+#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR)
+#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val)
+#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR)
+#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val)
+#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT)
+#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val)
+#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT)
+#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val)
+#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY)
+#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val)
+#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY)
+#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val)
+#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR)
+#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val)
+#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR)
+#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val)
+#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT)
+#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val)
+#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT)
+#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val)
+#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS)
+#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val)
+#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP)
+#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val)
+
+#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG)
+#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val)
+#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR)
+#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val)
+#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR)
+#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val)
+#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT)
+#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val)
+#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT)
+#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val)
+#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY)
+#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val)
+#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY)
+#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val)
+#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR)
+#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val)
+#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR)
+#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val)
+#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT)
+#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val)
+#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT)
+#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val)
+#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS)
+#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val)
+#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP)
+#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
+#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val)
+#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val)
+#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
+#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val)
+#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
+#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val)
+#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val)
+#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val)
+#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val)
+#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT)
+#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
+#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
+#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val)
+#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
+#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val)
+#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val)
+#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
+#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val)
+#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
+#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val)
+#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val)
+#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val)
+#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val)
+#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT)
+#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT)
+#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
+#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val)
+#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
+#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val)
+#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val)
+#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
+#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val)
+#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT)
+#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val)
+#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY)
+#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val)
+#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
+#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val)
+#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val)
+#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT)
+#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
+#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
+#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val)
+#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val)
+
+#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
+#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val)
+#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
+#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val)
+#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
+#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val)
+#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT)
+#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val)
+#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY)
+#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val)
+#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
+#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val)
+#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
+#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val)
+#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT)
+#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val)
+#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT)
+#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val)
+#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
+#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val)
+#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
+#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val)
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
+#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL)
+#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val)
+#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
+#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val)
+#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
+#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val)
+#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
+#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val)
+#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME)
+#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val)
+
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
+#define bfin_read_PORTGIO() bfin_read16(PORTGIO)
+#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val)
+#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR)
+#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val)
+#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET)
+#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val)
+#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE)
+#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA)
+#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val)
+#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR)
+#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val)
+#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET)
+#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val)
+#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE)
+#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB)
+#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val)
+#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR)
+#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val)
+#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET)
+#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val)
+#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE)
+#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR)
+#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val)
+#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR)
+#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val)
+#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE)
+#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val)
+#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH)
+#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val)
+#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN)
+#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val)
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
+#define bfin_read_PORTHIO() bfin_read16(PORTHIO)
+#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val)
+#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR)
+#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val)
+#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET)
+#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val)
+#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE)
+#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA)
+#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val)
+#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR)
+#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val)
+#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET)
+#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val)
+#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE)
+#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val)
+#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB)
+#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val)
+#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR)
+#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val)
+#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET)
+#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val)
+#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE)
+#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val)
+#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR)
+#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val)
+#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR)
+#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val)
+#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE)
+#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val)
+#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH)
+#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val)
+#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN)
+#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val)
+
+
+/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
+#define bfin_read_UART1_THR() bfin_read16(UART1_THR)
+#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val)
+#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR)
+#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val)
+#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL)
+#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val)
+#define bfin_read_UART1_IER() bfin_read16(UART1_IER)
+#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val)
+#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH)
+#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val)
+#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR)
+#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val)
+#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR)
+#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val)
+#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR)
+#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val)
+#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR)
+#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val)
+#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR)
+#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val)
+#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR)
+#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val)
+#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL)
+#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val)
+
+/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF51x processor) */
+
+/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
+#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER)
+#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val)
+#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER)
+#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val)
+#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER)
+#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val)
+#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX)
+#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val)
+
+
+/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
+#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL)
+#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val)
+#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT)
+#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val)
+#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT)
+#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val)
+#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT)
+#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val)
+#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW)
+#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val)
+#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT)
+#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val)
+#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT)
+#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val)
+
+#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL)
+#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val)
+#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT)
+#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val)
+#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT)
+#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val)
+#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT)
+#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val)
+#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW)
+#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val)
+#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT)
+#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val)
+#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT)
+#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val)
+
+/* ==== end from cdefBF534.h ==== */
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+
+#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX)
+#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val)
+#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX)
+#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val)
+#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX)
+#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val)
+
+#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE)
+#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val)
+#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE)
+#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val)
+#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE)
+#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val)
+#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW)
+#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val)
+#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW)
+#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val)
+#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW)
+#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val)
+#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS)
+#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val)
+#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS)
+#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val)
+#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS)
+#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val)
+#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE)
+#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val)
+#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW)
+#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val)
+#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS)
+#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val)
+
+/* HOST Port Registers */
+
+#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL)
+#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val)
+#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS)
+#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val)
+#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT)
+#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val)
+
+/* Counter Registers */
+
+#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG)
+#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val)
+#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK)
+#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val)
+#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS)
+#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val)
+#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND)
+#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val)
+#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE)
+#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val)
+#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER)
+#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val)
+#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX)
+#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val)
+#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN)
+#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val)
+
+/* OTP/FUSE Registers */
+
+#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL)
+#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val)
+#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN)
+#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val)
+#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS)
+#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val)
+#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING)
+#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val)
+
+/* Security Registers */
+
+#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT)
+#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val)
+#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL)
+#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val)
+#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS)
+#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val)
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0)
+#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val)
+#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1)
+#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val)
+#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2)
+#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val)
+#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3)
+#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val)
+
+/* NFC Registers */
+
+#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL)
+#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val)
+#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT)
+#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val)
+#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT)
+#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val)
+#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK)
+#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val)
+#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0)
+#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val)
+#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1)
+#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val)
+#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2)
+#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val)
+#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3)
+#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val)
+#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT)
+#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val)
+#define bfin_read_NFC_RST() bfin_read16(NFC_RST)
+#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val)
+#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL)
+#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val)
+#define bfin_read_NFC_READ() bfin_read16(NFC_READ)
+#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val)
+#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR)
+#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val)
+#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD)
+#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val)
+#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR)
+#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val)
+#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD)
+#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val)
+
+#endif /* _CDEF_BF52X_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/defBF512.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF512_H
+#define _DEF_BF512_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF512 */
+
+/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "defBF51x_base.h"
+
+#endif /* _DEF_BF512_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/defBF514.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF514_H
+#define _DEF_BF514_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF514 */
+
+/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "defBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF514 that are not in the common header */
+
+/* SDH Registers */
+
+#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
+#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
+#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
+#define SDH_COMMAND 0xFFC0390C /* SDH Command */
+#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
+#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
+#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
+#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
+#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
+#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
+#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
+#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
+#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
+#define SDH_STATUS 0xFFC03934 /* SDH Status */
+#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
+#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
+#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
+#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
+#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
+#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
+#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
+#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
+#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
+#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
+#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
+#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
+#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
+#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
+#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
+#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
+#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
+
+/* Removable Storage Interface Registers */
+
+#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
+#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
+#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
+#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
+#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
+#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
+#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
+#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
+#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
+#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
+#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
+#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
+#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
+#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
+#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
+#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
+#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
+#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
+#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
+#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
+#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
+#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
+#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
+#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
+#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
+#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
+#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
+#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+
+#endif /* _DEF_BF514_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/defBF516.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF516_H
+#define _DEF_BF516_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF516 */
+
+/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "defBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF516 that are not in the common header */
+/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
+
+#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
+#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
+#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
+#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
+#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
+#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
+#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
+#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
+#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
+#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
+#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
+#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
+#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
+#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
+#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
+#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
+#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
+#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
+#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
+
+#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
+#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
+#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
+#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
+#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
+#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
+#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
+#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
+
+#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
+#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
+#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
+#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
+#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
+
+#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
+#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
+#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
+#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
+#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
+#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
+#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
+#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
+#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
+#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
+#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
+#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
+#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
+#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
+#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
+#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
+#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
+#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
+#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
+#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */
+#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
+#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
+#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
+#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
+#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
+#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
+#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
+#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
+#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
+#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
+#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
+#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
+#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
+#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
+#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
+#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
+#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
+#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */
+#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
+
+/* Listing for IEEE-Supported Count Registers */
+
+#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
+#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
+#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
+#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
+#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
+#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
+#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
+#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
+#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
+#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
+#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
+#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
+#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
+#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
+#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
+#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
+#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
+#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
+#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */
+#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
+#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
+#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
+#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
+#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
+#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
+#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
+#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
+#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
+#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
+#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
+#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
+#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
+#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
+#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
+#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
+#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
+** Use these macros carefully, as any that do left shifts for field
+** depositing will result in the lower order bits being destroyed. Any
+** macro that shifts left to properly position the bit-field should be
+** used as part of an OR to initialize a register and NOT as a dynamic
+** modifier UNLESS the lower order bits are saved and ORed back in when
+** the macro is used.
+*************************************************************************************/
+
+/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
+
+/* EMAC_OPMODE Masks */
+
+#define RE 0x00000001 /* Receiver Enable */
+#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
+#define HU 0x00000010 /* Hash Filter Unicast Address */
+#define HM 0x00000020 /* Hash Filter Multicast Address */
+#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
+#define PR 0x00000080 /* Promiscuous Mode Enable */
+#define IFE 0x00000100 /* Inverse Filtering Enable */
+#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
+#define PBF 0x00000400 /* Pass Bad Frames Enable */
+#define PSF 0x00000800 /* Pass Short Frames Enable */
+#define RAF 0x00001000 /* Receive-All Mode */
+#define TE 0x00010000 /* Transmitter Enable */
+#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
+#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
+#define DC 0x00080000 /* Deferral Check */
+#define BOLMT 0x00300000 /* Back-Off Limit */
+#define BOLMT_10 0x00000000 /* 10-bit range */
+#define BOLMT_8 0x00100000 /* 8-bit range */
+#define BOLMT_4 0x00200000 /* 4-bit range */
+#define BOLMT_1 0x00300000 /* 1-bit range */
+#define DRTY 0x00400000 /* Disable TX Retry On Collision */
+#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
+#define RMII 0x01000000 /* RMII/MII* Mode */
+#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
+#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
+#define LB 0x08000000 /* Internal Loopback Enable */
+#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
+
+/* EMAC_STAADD Masks */
+
+#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
+#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
+#define STADISPRE 0x00000004 /* Disable Preamble Generation */
+#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
+#define REGAD 0x000007C0 /* STA Register Address */
+#define PHYAD 0x0000F800 /* PHY Device Address */
+
+#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
+#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
+
+/* EMAC_STADAT Mask */
+
+#define STADATA 0x0000FFFF /* Station Management Data */
+
+/* EMAC_FLC Masks */
+
+#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
+#define FLCE 0x00000002 /* Flow Control Enable */
+#define PCF 0x00000004 /* Pass Control Frames */
+#define BKPRSEN 0x00000008 /* Enable Backpressure */
+#define FLCPAUSE 0xFFFF0000 /* Pause Time */
+
+#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
+
+/* EMAC_WKUP_CTL Masks */
+
+#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
+#define MPKE 0x00000002 /* Magic Packet Enable */
+#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
+#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
+#define MPKS 0x00000020 /* Magic Packet Received Status */
+#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
+
+/* EMAC_WKUP_FFCMD Masks */
+
+#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
+#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
+#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
+#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
+#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
+#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
+#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
+#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
+
+/* EMAC_WKUP_FFOFF Masks */
+
+#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
+#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
+#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
+#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
+
+#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
+#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
+#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
+#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
+/* Set ALL Offsets */
+#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+
+#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
+#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
+
+#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
+#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+
+#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
+#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
+
+#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
+#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
+
+/* EMAC_SYSCTL Masks */
+
+#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
+#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
+#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
+#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
+#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
+
+#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
+
+/* EMAC_SYSTAT Masks */
+
+#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
+#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
+#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
+#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
+#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
+#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
+#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
+#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+
+#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
+#define RX_COMP 0x00001000 /* RX Frame Complete */
+#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
+#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
+#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
+#define RX_CRC 0x00010000 /* RX Frame CRC Error */
+#define RX_LEN 0x00020000 /* RX Frame Length Error */
+#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
+#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
+#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
+#define RX_PHY 0x00200000 /* RX Frame PHY Error */
+#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
+#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
+#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
+#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
+#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
+#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
+#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
+#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
+#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
+#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
+
+/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
+
+#define TX_COMP 0x00000001 /* TX Frame Complete */
+#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
+#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
+#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
+#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
+#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
+#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
+#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
+#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
+#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
+#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
+#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
+#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
+#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
+#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
+
+/* EMAC_MMC_CTL Masks */
+#define RSTC 0x00000001 /* Reset All Counters */
+#define CROLL 0x00000002 /* Counter Roll-Over Enable */
+#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
+#define MMCE 0x00000008 /* Enable MMC Counter Operation */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
+#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
+#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
+#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
+#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
+#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
+#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
+#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
+#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
+#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
+#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
+#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
+#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
+#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
+#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
+#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
+#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
+#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
+#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
+#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
+#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
+#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
+#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
+#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
+
+#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
+#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
+#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
+#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
+#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
+#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
+#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
+#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
+#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
+#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
+#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
+#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
+#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
+#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
+#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
+#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
+#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
+#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
+#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
+#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
+#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
+#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
+#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
+
+/* SDH Registers */
+
+#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
+#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
+#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
+#define SDH_COMMAND 0xFFC0390C /* SDH Command */
+#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
+#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
+#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
+#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
+#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
+#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
+#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
+#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
+#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
+#define SDH_STATUS 0xFFC03934 /* SDH Status */
+#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
+#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
+#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
+#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
+#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
+#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
+#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
+#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
+#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
+#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
+#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
+#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
+#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
+#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
+#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
+#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
+#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
+
+/* Removable Storage Interface Registers */
+
+#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
+#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
+#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
+#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
+#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
+#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
+#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
+#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
+#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
+#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
+#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
+#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
+#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
+#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
+#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
+#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
+#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
+#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
+#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
+#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
+#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
+#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
+#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
+#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
+#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
+#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
+#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
+#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+
+#endif /* _DEF_BF516_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/defBF518.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF518_H
+#define _DEF_BF518_H
+
+/* Include all Core registers and bit definitions */
+#include <asm/def_LPBlackfin.h>
+
+/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF518 */
+
+/* Include defBF51x_base.h for the set of #defines that are common to all ADSP-BF51x processors */
+#include "defBF51x_base.h"
+
+/* The following are the #defines needed by ADSP-BF518 that are not in the common header */
+/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
+
+#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
+#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
+#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
+#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
+#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
+#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
+#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
+#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
+#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
+#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
+#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
+#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
+#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
+#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
+#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
+#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
+#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
+#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
+#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
+
+#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
+#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
+#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
+#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
+#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
+#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
+#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
+#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
+
+#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
+#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
+#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
+#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
+#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
+
+#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
+#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
+#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
+#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
+#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
+#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
+#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
+#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
+#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
+#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
+#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
+#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
+#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
+#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
+#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
+#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
+#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
+#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
+#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
+#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */
+#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
+#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
+#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
+#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
+#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
+#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
+#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
+#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
+#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
+#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
+#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
+#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
+#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
+#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
+#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
+#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
+#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
+#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */
+#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
+
+/* Listing for IEEE-Supported Count Registers */
+
+#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
+#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
+#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
+#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
+#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
+#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
+#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
+#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
+#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
+#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
+#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
+#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
+#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
+#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
+#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
+#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
+#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
+#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
+#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */
+#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
+
+#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
+#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
+#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
+#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
+#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
+#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
+#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
+#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
+#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
+#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
+#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
+#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
+#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
+#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
+#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
+#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
+#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
+#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
+#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
+#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
+#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
+#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
+#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
+** Use these macros carefully, as any that do left shifts for field
+** depositing will result in the lower order bits being destroyed. Any
+** macro that shifts left to properly position the bit-field should be
+** used as part of an OR to initialize a register and NOT as a dynamic
+** modifier UNLESS the lower order bits are saved and ORed back in when
+** the macro is used.
+*************************************************************************************/
+
+/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
+
+/* EMAC_OPMODE Masks */
+
+#define RE 0x00000001 /* Receiver Enable */
+#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
+#define HU 0x00000010 /* Hash Filter Unicast Address */
+#define HM 0x00000020 /* Hash Filter Multicast Address */
+#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
+#define PR 0x00000080 /* Promiscuous Mode Enable */
+#define IFE 0x00000100 /* Inverse Filtering Enable */
+#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
+#define PBF 0x00000400 /* Pass Bad Frames Enable */
+#define PSF 0x00000800 /* Pass Short Frames Enable */
+#define RAF 0x00001000 /* Receive-All Mode */
+#define TE 0x00010000 /* Transmitter Enable */
+#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
+#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
+#define DC 0x00080000 /* Deferral Check */
+#define BOLMT 0x00300000 /* Back-Off Limit */
+#define BOLMT_10 0x00000000 /* 10-bit range */
+#define BOLMT_8 0x00100000 /* 8-bit range */
+#define BOLMT_4 0x00200000 /* 4-bit range */
+#define BOLMT_1 0x00300000 /* 1-bit range */
+#define DRTY 0x00400000 /* Disable TX Retry On Collision */
+#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
+#define RMII 0x01000000 /* RMII/MII* Mode */
+#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
+#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
+#define LB 0x08000000 /* Internal Loopback Enable */
+#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
+
+/* EMAC_STAADD Masks */
+
+#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
+#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
+#define STADISPRE 0x00000004 /* Disable Preamble Generation */
+#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
+#define REGAD 0x000007C0 /* STA Register Address */
+#define PHYAD 0x0000F800 /* PHY Device Address */
+
+#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
+#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
+
+/* EMAC_STADAT Mask */
+
+#define STADATA 0x0000FFFF /* Station Management Data */
+
+/* EMAC_FLC Masks */
+
+#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
+#define FLCE 0x00000002 /* Flow Control Enable */
+#define PCF 0x00000004 /* Pass Control Frames */
+#define BKPRSEN 0x00000008 /* Enable Backpressure */
+#define FLCPAUSE 0xFFFF0000 /* Pause Time */
+
+#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
+
+/* EMAC_WKUP_CTL Masks */
+
+#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
+#define MPKE 0x00000002 /* Magic Packet Enable */
+#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
+#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
+#define MPKS 0x00000020 /* Magic Packet Received Status */
+#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
+
+/* EMAC_WKUP_FFCMD Masks */
+
+#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
+#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
+#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
+#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
+#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
+#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
+#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
+#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
+
+/* EMAC_WKUP_FFOFF Masks */
+
+#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
+#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
+#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
+#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
+
+#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
+#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
+#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
+#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
+/* Set ALL Offsets */
+#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
+
+/* EMAC_WKUP_FFCRC0 Masks */
+
+#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
+#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
+
+#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
+#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
+
+/* EMAC_WKUP_FFCRC1 Masks */
+
+#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
+#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
+
+#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
+#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
+
+/* EMAC_SYSCTL Masks */
+
+#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
+#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
+#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
+#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
+#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
+
+#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
+
+/* EMAC_SYSTAT Masks */
+
+#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
+#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
+#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
+#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
+#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
+#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
+#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
+#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
+
+/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
+
+#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
+#define RX_COMP 0x00001000 /* RX Frame Complete */
+#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
+#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
+#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
+#define RX_CRC 0x00010000 /* RX Frame CRC Error */
+#define RX_LEN 0x00020000 /* RX Frame Length Error */
+#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
+#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
+#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
+#define RX_PHY 0x00200000 /* RX Frame PHY Error */
+#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
+#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
+#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
+#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
+#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
+#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
+#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
+#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
+#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
+#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
+
+/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
+
+#define TX_COMP 0x00000001 /* TX Frame Complete */
+#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
+#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
+#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
+#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
+#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
+#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
+#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
+#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
+#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
+#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
+#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
+#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
+#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
+#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
+
+/* EMAC_MMC_CTL Masks */
+#define RSTC 0x00000001 /* Reset All Counters */
+#define CROLL 0x00000002 /* Counter Roll-Over Enable */
+#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
+#define MMCE 0x00000008 /* Enable MMC Counter Operation */
+
+/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
+#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
+#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
+#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
+#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
+#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
+#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
+#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
+#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
+#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
+#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
+#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
+#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
+#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
+#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
+#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
+#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
+#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
+#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
+#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
+#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
+#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
+#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
+#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
+#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
+
+/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
+
+#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
+#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
+#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
+#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
+#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
+#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
+#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
+#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
+#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
+#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
+#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
+#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
+#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
+#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
+#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
+#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
+#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
+#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
+#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
+#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
+#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
+#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
+#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
+
+/* SDH Registers */
+
+#define SDH_PWR_CTL 0xFFC03900 /* SDH Power Control */
+#define SDH_CLK_CTL 0xFFC03904 /* SDH Clock Control */
+#define SDH_ARGUMENT 0xFFC03908 /* SDH Argument */
+#define SDH_COMMAND 0xFFC0390C /* SDH Command */
+#define SDH_RESP_CMD 0xFFC03910 /* SDH Response Command */
+#define SDH_RESPONSE0 0xFFC03914 /* SDH Response0 */
+#define SDH_RESPONSE1 0xFFC03918 /* SDH Response1 */
+#define SDH_RESPONSE2 0xFFC0391C /* SDH Response2 */
+#define SDH_RESPONSE3 0xFFC03920 /* SDH Response3 */
+#define SDH_DATA_TIMER 0xFFC03924 /* SDH Data Timer */
+#define SDH_DATA_LGTH 0xFFC03928 /* SDH Data Length */
+#define SDH_DATA_CTL 0xFFC0392C /* SDH Data Control */
+#define SDH_DATA_CNT 0xFFC03930 /* SDH Data Counter */
+#define SDH_STATUS 0xFFC03934 /* SDH Status */
+#define SDH_STATUS_CLR 0xFFC03938 /* SDH Status Clear */
+#define SDH_MASK0 0xFFC0393C /* SDH Interrupt0 Mask */
+#define SDH_MASK1 0xFFC03940 /* SDH Interrupt1 Mask */
+#define SDH_FIFO_CNT 0xFFC03948 /* SDH FIFO Counter */
+#define SDH_FIFO 0xFFC03980 /* SDH Data FIFO */
+#define SDH_E_STATUS 0xFFC039C0 /* SDH Exception Status */
+#define SDH_E_MASK 0xFFC039C4 /* SDH Exception Mask */
+#define SDH_CFG 0xFFC039C8 /* SDH Configuration */
+#define SDH_RD_WAIT_EN 0xFFC039CC /* SDH Read Wait Enable */
+#define SDH_PID0 0xFFC039D0 /* SDH Peripheral Identification0 */
+#define SDH_PID1 0xFFC039D4 /* SDH Peripheral Identification1 */
+#define SDH_PID2 0xFFC039D8 /* SDH Peripheral Identification2 */
+#define SDH_PID3 0xFFC039DC /* SDH Peripheral Identification3 */
+#define SDH_PID4 0xFFC039E0 /* SDH Peripheral Identification4 */
+#define SDH_PID5 0xFFC039E4 /* SDH Peripheral Identification5 */
+#define SDH_PID6 0xFFC039E8 /* SDH Peripheral Identification6 */
+#define SDH_PID7 0xFFC039EC /* SDH Peripheral Identification7 */
+
+/* Removable Storage Interface Registers */
+
+#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
+#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
+#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
+#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
+#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
+#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
+#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
+#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
+#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
+#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
+#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
+#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
+#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
+#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
+#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
+#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
+#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
+#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
+#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
+#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
+#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
+#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
+#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
+#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
+#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
+#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
+#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
+#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
+#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
+#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
+#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
+#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
+
+/* PTP TSYNC Registers */
+
+#define EMAC_PTP_CTL 0xFFC030A0 /* PTP Block Control */
+#define EMAC_PTP_IE 0xFFC030A4 /* PTP Block Interrupt Enable */
+#define EMAC_PTP_ISTAT 0xFFC030A8 /* PTP Block Interrupt Status */
+#define EMAC_PTP_FOFF 0xFFC030AC /* PTP Filter offset Register */
+#define EMAC_PTP_FV1 0xFFC030B0 /* PTP Filter Value Register 1 */
+#define EMAC_PTP_FV2 0xFFC030B4 /* PTP Filter Value Register 2 */
+#define EMAC_PTP_FV3 0xFFC030B8 /* PTP Filter Value Register 3 */
+#define EMAC_PTP_ADDEND 0xFFC030BC /* PTP Addend for Frequency Compensation */
+#define EMAC_PTP_ACCR 0xFFC030C0 /* PTP Accumulator for Frequency Compensation */
+#define EMAC_PTP_OFFSET 0xFFC030C4 /* PTP Time Offset Register */
+#define EMAC_PTP_TIMELO 0xFFC030C8 /* PTP Precision Clock Time Low */
+#define EMAC_PTP_TIMEHI 0xFFC030CC /* PTP Precision Clock Time High */
+#define EMAC_PTP_RXSNAPLO 0xFFC030D0 /* PTP Receive Snapshot Register Low */
+#define EMAC_PTP_RXSNAPHI 0xFFC030D4 /* PTP Receive Snapshot Register High */
+#define EMAC_PTP_TXSNAPLO 0xFFC030D8 /* PTP Transmit Snapshot Register Low */
+#define EMAC_PTP_TXSNAPHI 0xFFC030DC /* PTP Transmit Snapshot Register High */
+#define EMAC_PTP_ALARMLO 0xFFC030E0 /* PTP Alarm time Low */
+#define EMAC_PTP_ALARMHI 0xFFC030E4 /* PTP Alarm time High */
+#define EMAC_PTP_ID_OFF 0xFFC030E8 /* PTP Capture ID offset register */
+#define EMAC_PTP_ID_SNAP 0xFFC030EC /* PTP Capture ID register */
+#define EMAC_PTP_PPS_STARTLO 0xFFC030F0 /* PPS Start Time Low */
+#define EMAC_PTP_PPS_STARTHI 0xFFC030F4 /* PPS Start Time High */
+#define EMAC_PTP_PPS_PERIOD 0xFFC030F8 /* PPS Count Register */
+
+#endif /* _DEF_BF518_H */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/defBF51x_base.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _DEF_BF51X_H
+#define _DEF_BF51X_H
+
+
+/* ************************************************************** */
+/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF51x */
+/* ************************************************************** */
+
+/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
+#define PLL_CTL 0xFFC00000 /* PLL Control Register */
+#define PLL_DIV 0xFFC00004 /* PLL Divide Register */
+#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */
+#define PLL_STAT 0xFFC0000C /* PLL Status Register */
+#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */
+#define CHIPID 0xFFC00014 /* Device ID Register */
+
+/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */
+#define SWRST 0xFFC00100 /* Software Reset Register */
+#define SYSCR 0xFFC00104 /* System Configuration Register */
+#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */
+
+#define SIC_IMASK0 0xFFC0010C /* Interrupt Mask Register */
+#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */
+#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */
+#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */
+#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */
+#define SIC_ISR0 0xFFC00120 /* Interrupt Status Register */
+#define SIC_IWR0 0xFFC00124 /* Interrupt Wakeup Register */
+
+/* SIC Additions to ADSP-BF51x (0xFFC0014C - 0xFFC00162) */
+#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */
+#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */
+#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */
+#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */
+#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */
+#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */
+#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */
+
+
+/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */
+#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */
+#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */
+#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */
+
+
+/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */
+#define RTC_STAT 0xFFC00300 /* RTC Status Register */
+#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */
+#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */
+#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */
+#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */
+#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */
+#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */
+
+
+/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */
+#define UART0_THR 0xFFC00400 /* Transmit Holding register */
+#define UART0_RBR 0xFFC00400 /* Receive Buffer register */
+#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
+#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */
+#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
+#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */
+#define UART0_LCR 0xFFC0040C /* Line Control Register */
+#define UART0_MCR 0xFFC00410 /* Modem Control Register */
+#define UART0_LSR 0xFFC00414 /* Line Status Register */
+#define UART0_MSR 0xFFC00418 /* Modem Status Register */
+#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */
+#define UART0_GCTL 0xFFC00424 /* Global Control Register */
+
+/* SPI0 Controller (0xFFC00500 - 0xFFC005FF) */
+#define SPI0_REGBASE 0xFFC00500
+#define SPI0_CTL 0xFFC00500 /* SPI Control Register */
+#define SPI0_FLG 0xFFC00504 /* SPI Flag register */
+#define SPI0_STAT 0xFFC00508 /* SPI Status register */
+#define SPI0_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
+#define SPI0_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
+#define SPI0_BAUD 0xFFC00514 /* SPI Baud rate Register */
+#define SPI0_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
+
+/* SPI1 Controller (0xFFC03400 - 0xFFC034FF) */
+#define SPI1_REGBASE 0xFFC03400
+#define SPI1_CTL 0xFFC03400 /* SPI Control Register */
+#define SPI1_FLG 0xFFC03404 /* SPI Flag register */
+#define SPI1_STAT 0xFFC03408 /* SPI Status register */
+#define SPI1_TDBR 0xFFC0340C /* SPI Transmit Data Buffer Register */
+#define SPI1_RDBR 0xFFC03410 /* SPI Receive Data Buffer Register */
+#define SPI1_BAUD 0xFFC03414 /* SPI Baud rate Register */
+#define SPI1_SHADOW 0xFFC03418 /* SPI_RDBR Shadow Register */
+
+/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */
+#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */
+#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */
+#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */
+#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */
+
+#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */
+#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */
+#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */
+#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */
+
+#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */
+#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */
+#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */
+#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */
+
+#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */
+#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */
+#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */
+#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */
+
+#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */
+#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */
+#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */
+#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */
+
+#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */
+#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */
+#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */
+#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */
+
+#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */
+#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */
+#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */
+#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */
+
+#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */
+#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */
+#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */
+#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */
+
+#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */
+#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */
+#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */
+
+/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */
+#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */
+#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */
+#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */
+#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */
+#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */
+#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */
+#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */
+#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */
+#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */
+#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */
+#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */
+#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */
+#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */
+#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */
+#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */
+#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */
+#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */
+
+/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
+#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
+#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
+#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
+#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
+#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
+#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
+#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
+#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
+#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
+#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
+#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
+#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
+#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
+#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
+#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
+#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
+#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
+#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
+#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
+#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
+
+/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
+#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
+#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
+#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
+#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
+#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
+#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
+#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
+#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
+#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
+#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
+#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
+#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
+#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
+#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
+#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
+#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
+#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
+#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
+#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
+#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
+
+/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
+#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
+#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
+#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
+#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
+#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
+#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
+#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
+
+/* DMA Traffic Control Registers */
+#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+
+/* Alternate deprecated register names (below) provided for backwards code compatibility */
+#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */
+#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */
+
+/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */
+#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */
+#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */
+#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */
+#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */
+#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */
+#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */
+#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */
+#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */
+#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */
+#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */
+#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */
+#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */
+#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */
+
+#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */
+#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */
+#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */
+#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */
+#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */
+#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */
+#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */
+#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */
+#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */
+#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */
+#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */
+#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */
+#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */
+
+#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */
+#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */
+#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */
+#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */
+#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */
+#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */
+#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */
+#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */
+#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */
+#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */
+#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */
+#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */
+#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */
+
+#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */
+#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */
+#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */
+#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */
+#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */
+#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */
+#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */
+#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */
+#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */
+#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */
+#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */
+#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */
+#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */
+
+#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */
+#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */
+#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */
+#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */
+#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */
+#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */
+#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */
+#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */
+#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */
+#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */
+#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */
+#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */
+#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */
+
+#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */
+#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */
+#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */
+#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */
+#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */
+#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */
+#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */
+#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */
+#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */
+#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */
+#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */
+#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */
+#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */
+
+#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */
+#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */
+#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */
+#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */
+#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */
+#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */
+#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */
+#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */
+#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */
+#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */
+#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */
+#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */
+#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */
+
+#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */
+#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */
+#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */
+#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */
+#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */
+#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */
+#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */
+#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */
+#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */
+#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */
+#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */
+#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */
+#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */
+
+#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */
+#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */
+#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */
+#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */
+#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */
+#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */
+#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */
+#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */
+#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */
+#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */
+#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */
+#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */
+#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */
+
+#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */
+#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */
+#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */
+#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */
+#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */
+#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */
+#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */
+#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */
+#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */
+#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */
+#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */
+#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */
+#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */
+
+#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */
+#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */
+#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */
+#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */
+#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */
+#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */
+#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */
+#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */
+#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */
+#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */
+#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */
+#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */
+#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */
+
+#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */
+#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */
+#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */
+#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */
+#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */
+#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */
+#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */
+#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */
+#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */
+#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */
+#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */
+#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */
+#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */
+
+#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */
+#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */
+#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */
+#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */
+#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */
+#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */
+#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */
+#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */
+#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */
+#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */
+#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */
+#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */
+#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */
+
+#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */
+#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */
+#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */
+#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */
+#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */
+#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */
+#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */
+#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */
+#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */
+#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */
+#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */
+#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */
+#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */
+
+#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */
+#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */
+#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */
+#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */
+#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */
+#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */
+#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */
+#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */
+#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */
+#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */
+#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */
+#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */
+#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */
+
+#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */
+#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */
+#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */
+#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */
+#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */
+#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */
+#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */
+#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */
+#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */
+#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */
+#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */
+#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */
+#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */
+
+
+/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */
+#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */
+#define PPI_STATUS 0xFFC01004 /* PPI Status Register */
+#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */
+#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */
+#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */
+
+
+/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */
+#define TWI0_REGBASE 0xFFC01400
+#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */
+#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */
+#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */
+#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */
+#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */
+#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */
+#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */
+#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */
+#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */
+#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */
+#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */
+#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */
+#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */
+#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */
+#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */
+#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */
+
+
+/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */
+#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */
+#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */
+#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */
+#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */
+#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */
+#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */
+#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */
+#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */
+#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */
+#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */
+#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */
+#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */
+#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */
+#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */
+#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */
+#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */
+#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */
+
+
+/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */
+#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */
+#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */
+#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */
+#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */
+#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */
+#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */
+#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */
+#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */
+#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */
+#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */
+#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */
+#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */
+#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */
+#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */
+#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */
+#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */
+#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */
+
+
+/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */
+#define UART1_THR 0xFFC02000 /* Transmit Holding register */
+#define UART1_RBR 0xFFC02000 /* Receive Buffer register */
+#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */
+#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */
+#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */
+#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */
+#define UART1_LCR 0xFFC0200C /* Line Control Register */
+#define UART1_MCR 0xFFC02010 /* Modem Control Register */
+#define UART1_LSR 0xFFC02014 /* Line Status Register */
+#define UART1_MSR 0xFFC02018 /* Modem Status Register */
+#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */
+#define UART1_GCTL 0xFFC02024 /* Global Control Register */
+
+
+/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */
+#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */
+#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */
+#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */
+#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */
+
+
+/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */
+#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
+#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
+#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
+#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
+#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
+
+#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
+#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
+#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
+#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
+#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
+
+
+/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */
+#define PORTF_MUX 0xFFC03210 /* Port F mux control */
+#define PORTG_MUX 0xFFC03214 /* Port G mux control */
+#define PORTH_MUX 0xFFC03218 /* Port H mux control */
+#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */
+#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */
+#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */
+#define PORTF_SLEW 0xFFC03230 /* Port F slew control */
+#define PORTG_SLEW 0xFFC03234 /* Port G slew control */
+#define PORTH_SLEW 0xFFC03238 /* Port H slew control */
+#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */
+#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */
+#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */
+#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */
+#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */
+#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */
+
+
+/***********************************************************************************
+** System MMR Register Bits And Macros
+**
+** Disclaimer: All macros are intended to make C and Assembly code more readable.
+** Use these macros carefully, as any that do left shifts for field
+** depositing will result in the lower order bits being destroyed. Any
+** macro that shifts left to properly position the bit-field should be
+** used as part of an OR to initialize a register and NOT as a dynamic
+** modifier UNLESS the lower order bits are saved and ORed back in when
+** the macro is used.
+*************************************************************************************/
+/*
+** ********************* PLL AND RESET MASKS ****************************************/
+/* PLL_CTL Masks */
+#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF 0x0002 /* PLL Not Powered */
+#define STOPCK 0x0008 /* Core Clock Off */
+#define PDWN 0x0020 /* Enter Deep Sleep Mode */
+#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
+#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
+#define BYPASS 0x0100 /* Bypass the PLL */
+#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
+/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
+#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL 0x000F /* System Select */
+#define CSEL 0x0030 /* Core Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
+/* PLL_DIV Macros */
+#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+
+/* VR_CTL Masks */
+#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
+#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
+
+#define VLEV 0x00F0 /* Internal Voltage Level */
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
+#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
+#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
+#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
+#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
+#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
+#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
+#define FULL_ON 0x0002 /* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
+
+/* CHIPID Masks */
+#define CHIPID_VERSION 0xF0000000
+#define CHIPID_FAMILY 0x0FFFF000
+#define CHIPID_MANUFACTURE 0x00000FFE
+
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
+/* SYSCR Masks */
+#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */
+#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */
+
+
+/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/
+/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */
+
+#if 0
+#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */
+
+#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
+#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
+#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */
+#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */
+#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */
+#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */
+#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */
+
+#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */
+#define IRQ_TWI 0x00000200 /* TWI Interrupt */
+#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */
+#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */
+#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */
+#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */
+#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */
+#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */
+
+#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */
+#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */
+#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */
+#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */
+#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */
+#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */
+#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */
+#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */
+#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */
+#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */
+
+#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */
+#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */
+#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */
+#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */
+#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */
+#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */
+#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */
+#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */
+#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */
+#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */
+#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */
+#endif
+
+/* SIC_IAR0 Macros */
+#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */
+#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */
+#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */
+#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */
+#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */
+#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */
+#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */
+#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */
+
+/* SIC_IAR1 Macros */
+#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */
+#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */
+#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */
+#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */
+#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */
+#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */
+#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */
+#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */
+
+/* SIC_IAR2 Macros */
+#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */
+#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */
+#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */
+#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */
+#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */
+#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */
+#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */
+#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */
+
+/* SIC_IAR3 Macros */
+#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */
+#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */
+#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */
+#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */
+#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */
+#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */
+#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */
+#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */
+
+
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
+#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
+
+
+/* ********* WATCHDOG TIMER MASKS ******************** */
+
+/* Watchdog Timer WDOG_CTL Register Masks */
+
+#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
+#define WDEV_RESET 0x0000 /* generate reset event on roll over */
+#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
+#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
+#define WDEV_NONE 0x0006 /* no event on roll over */
+#define WDEN 0x0FF0 /* enable watchdog */
+#define WDDIS 0x0AD0 /* disable watchdog */
+#define WDRO 0x8000 /* watchdog rolled over latch */
+
+/* depreciated WDOG_CTL Register Masks for legacy code */
+
+
+#define ICTL WDEV
+#define ENABLE_RESET WDEV_RESET
+#define WDOG_RESET WDEV_RESET
+#define ENABLE_NMI WDEV_NMI
+#define WDOG_NMI WDEV_NMI
+#define ENABLE_GPI WDEV_GPI
+#define WDOG_GPI WDEV_GPI
+#define DISABLE_EVT WDEV_NONE
+#define WDOG_NONE WDEV_NONE
+
+#define TMR_EN WDEN
+#define TMR_DIS WDDIS
+#define TRO WDRO
+#define ICTL_P0 0x01
+ #define ICTL_P1 0x02
+#define TRO_P 0x0F
+
+
+
+/* *************** REAL TIME CLOCK MASKS **************************/
+/* RTC_STAT and RTC_ALARM Masks */
+#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
+#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
+#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
+#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
+
+/* RTC_ALARM Macro z=day y=hr x=min w=sec */
+#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
+
+/* RTC_ICTL and RTC_ISTAT Masks */
+#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
+#define ALARM 0x0002 /* Alarm Interrupt Enable */
+#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
+#define MINUTE 0x0008 /* Minutes Interrupt Enable */
+#define HOUR 0x0010 /* Hours Interrupt Enable */
+#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
+#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
+#define WRITE_PENDING 0x4000 /* Write Pending Status */
+#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
+
+/* RTC_FAST / RTC_PREN Mask */
+#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
+
+
+/* ************** UART CONTROLLER MASKS *************************/
+/* UARTx_LCR Masks */
+#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
+#define STB 0x04 /* Stop Bits */
+#define PEN 0x08 /* Parity Enable */
+#define EPS 0x10 /* Even Parity Select */
+#define STP 0x20 /* Stick Parity */
+#define SB 0x40 /* Set Break */
+#define DLAB 0x80 /* Divisor Latch Access */
+
+/* UARTx_MCR Mask */
+#define LOOP_ENA 0x10 /* Loopback Mode Enable */
+#define LOOP_ENA_P 0x04
+
+/* UARTx_LSR Masks */
+#define DR 0x01 /* Data Ready */
+#define OE 0x02 /* Overrun Error */
+#define PE 0x04 /* Parity Error */
+#define FE 0x08 /* Framing Error */
+#define BI 0x10 /* Break Interrupt */
+#define THRE 0x20 /* THR Empty */
+#define TEMT 0x40 /* TSR and UART_THR Empty */
+
+/* UARTx_IER Masks */
+#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */
+#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI 0x04 /* Enable RX Status Interrupt */
+
+/* UARTx_IIR Masks */
+#define NINT 0x01 /* Pending Interrupt */
+#define IIR_TX_READY 0x02 /* UART_THR empty */
+#define IIR_RX_READY 0x04 /* Receive data ready */
+#define IIR_LINE_CHANGE 0x06 /* Receive line status */
+#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */
+
+/* UARTx_GCTL Masks */
+#define UCEN 0x01 /* Enable UARTx Clocks */
+#define IREN 0x02 /* Enable IrDA Mode */
+#define TPOLC 0x04 /* IrDA TX Polarity Change */
+#define RPOLC 0x08 /* IrDA RX Polarity Change */
+#define FPE 0x10 /* Force Parity Error On Transmit */
+#define FFE 0x20 /* Force Framing Error On Transmit */
+
+
+/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/
+/* SPI_CTL Masks */
+#define TIMOD 0x0003 /* Transfer Initiate Mode */
+#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */
+#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */
+#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */
+#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */
+#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */
+#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */
+#define PSSE 0x0010 /* Slave-Select Input Enable */
+#define EMISO 0x0020 /* Enable MISO As Output */
+#define SIZE 0x0100 /* Size of Words (16/8* Bits) */
+#define LSBF 0x0200 /* LSB First */
+#define CPHA 0x0400 /* Clock Phase */
+#define CPOL 0x0800 /* Clock Polarity */
+#define MSTR 0x1000 /* Master/Slave* */
+#define WOM 0x2000 /* Write Open Drain Master */
+#define SPE 0x4000 /* SPI Enable */
+
+/* SPI_FLG Masks */
+#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */
+#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */
+#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */
+#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */
+#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */
+#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */
+#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */
+#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */
+#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */
+#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */
+#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */
+#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */
+#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */
+#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */
+
+/* SPI_STAT Masks */
+#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */
+#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */
+#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */
+#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */
+#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */
+#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */
+#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */
+
+
+/* **************** GENERAL PURPOSE TIMER MASKS **********************/
+/* TIMER_ENABLE Masks */
+#define TIMEN0 0x0001 /* Enable Timer 0 */
+#define TIMEN1 0x0002 /* Enable Timer 1 */
+#define TIMEN2 0x0004 /* Enable Timer 2 */
+#define TIMEN3 0x0008 /* Enable Timer 3 */
+#define TIMEN4 0x0010 /* Enable Timer 4 */
+#define TIMEN5 0x0020 /* Enable Timer 5 */
+#define TIMEN6 0x0040 /* Enable Timer 6 */
+#define TIMEN7 0x0080 /* Enable Timer 7 */
+
+/* TIMER_DISABLE Masks */
+#define TIMDIS0 TIMEN0 /* Disable Timer 0 */
+#define TIMDIS1 TIMEN1 /* Disable Timer 1 */
+#define TIMDIS2 TIMEN2 /* Disable Timer 2 */
+#define TIMDIS3 TIMEN3 /* Disable Timer 3 */
+#define TIMDIS4 TIMEN4 /* Disable Timer 4 */
+#define TIMDIS5 TIMEN5 /* Disable Timer 5 */
+#define TIMDIS6 TIMEN6 /* Disable Timer 6 */
+#define TIMDIS7 TIMEN7 /* Disable Timer 7 */
+
+/* TIMER_STATUS Masks */
+#define TIMIL0 0x00000001 /* Timer 0 Interrupt */
+#define TIMIL1 0x00000002 /* Timer 1 Interrupt */
+#define TIMIL2 0x00000004 /* Timer 2 Interrupt */
+#define TIMIL3 0x00000008 /* Timer 3 Interrupt */
+#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */
+#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */
+#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */
+#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */
+#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */
+#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */
+#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */
+#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */
+#define TIMIL4 0x00010000 /* Timer 4 Interrupt */
+#define TIMIL5 0x00020000 /* Timer 5 Interrupt */
+#define TIMIL6 0x00040000 /* Timer 6 Interrupt */
+#define TIMIL7 0x00080000 /* Timer 7 Interrupt */
+#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */
+#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */
+#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */
+#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */
+#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
+#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
+#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
+#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define TOVL_ERR0 TOVF_ERR0
+#define TOVL_ERR1 TOVF_ERR1
+#define TOVL_ERR2 TOVF_ERR2
+#define TOVL_ERR3 TOVF_ERR3
+#define TOVL_ERR4 TOVF_ERR4
+#define TOVL_ERR5 TOVF_ERR5
+#define TOVL_ERR6 TOVF_ERR6
+#define TOVL_ERR7 TOVF_ERR7
+
+/* TIMERx_CONFIG Masks */
+#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */
+#define WDTH_CAP 0x0002 /* Width Capture Input Mode */
+#define EXT_CLK 0x0003 /* External Clock Mode */
+#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */
+#define PERIOD_CNT 0x0008 /* Period Count */
+#define IRQ_ENA 0x0010 /* Interrupt Request Enable */
+#define TIN_SEL 0x0020 /* Timer Input Select */
+#define OUT_DIS 0x0040 /* Output Pad Disable */
+#define CLK_SEL 0x0080 /* Timer Clock Select */
+#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */
+#define EMU_RUN 0x0200 /* Emulation Behavior Select */
+#define ERR_TYP 0xC000 /* Error Type */
+
+
+/* ****************** GPIO PORTS F, G, H MASKS ***********************/
+/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */
+/* Port F Masks */
+#define PF0 0x0001
+#define PF1 0x0002
+#define PF2 0x0004
+#define PF3 0x0008
+#define PF4 0x0010
+#define PF5 0x0020
+#define PF6 0x0040
+#define PF7 0x0080
+#define PF8 0x0100
+#define PF9 0x0200
+#define PF10 0x0400
+#define PF11 0x0800
+#define PF12 0x1000
+#define PF13 0x2000
+#define PF14 0x4000
+#define PF15 0x8000
+
+/* Port G Masks */
+#define PG0 0x0001
+#define PG1 0x0002
+#define PG2 0x0004
+#define PG3 0x0008
+#define PG4 0x0010
+#define PG5 0x0020
+#define PG6 0x0040
+#define PG7 0x0080
+#define PG8 0x0100
+#define PG9 0x0200
+#define PG10 0x0400
+#define PG11 0x0800
+#define PG12 0x1000
+#define PG13 0x2000
+#define PG14 0x4000
+#define PG15 0x8000
+
+/* Port H Masks */
+#define PH0 0x0001
+#define PH1 0x0002
+#define PH2 0x0004
+#define PH3 0x0008
+#define PH4 0x0010
+#define PH5 0x0020
+#define PH6 0x0040
+#define PH7 0x0080
+
+
+/* ******************* SERIAL PORT MASKS **************************************/
+/* SPORTx_TCR1 Masks */
+#define TSPEN 0x0001 /* Transmit Enable */
+#define ITCLK 0x0002 /* Internal Transmit Clock Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define TLSBIT 0x0010 /* Transmit Bit Order */
+#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */
+#define TFSR 0x0400 /* Transmit Frame Sync Required Select */
+#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */
+#define LTFS 0x1000 /* Low Transmit Frame Sync Select */
+#define LATFS 0x2000 /* Late Transmit Frame Sync Select */
+#define TCKFE 0x4000 /* Clock Falling Edge Select */
+
+/* SPORTx_TCR2 Masks and Macro */
+#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */
+#define TXSE 0x0100 /* TX Secondary Enable */
+#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */
+#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */
+
+/* SPORTx_RCR1 Masks */
+#define RSPEN 0x0001 /* Receive Enable */
+#define IRCLK 0x0002 /* Internal Receive Clock Select */
+#define DTYPE_NORM 0x0004 /* Data Format Normal */
+#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */
+#define DTYPE_ALAW 0x000C /* Compand Using A-Law */
+#define RLSBIT 0x0010 /* Receive Bit Order */
+#define IRFS 0x0200 /* Internal Receive Frame Sync Select */
+#define RFSR 0x0400 /* Receive Frame Sync Required Select */
+#define LRFS 0x1000 /* Low Receive Frame Sync Select */
+#define LARFS 0x2000 /* Late Receive Frame Sync Select */
+#define RCKFE 0x4000 /* Clock Falling Edge Select */
+
+/* SPORTx_RCR2 Masks */
+#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */
+#define RXSE 0x0100 /* RX Secondary Enable */
+#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */
+#define RRFST 0x0400 /* Right-First Data Order */
+
+/* SPORTx_STAT Masks */
+#define RXNE 0x0001 /* Receive FIFO Not Empty Status */
+#define RUVF 0x0002 /* Sticky Receive Underflow Status */
+#define ROVF 0x0004 /* Sticky Receive Overflow Status */
+#define TXF 0x0008 /* Transmit FIFO Full Status */
+#define TUVF 0x0010 /* Sticky Transmit Underflow Status */
+#define TOVF 0x0020 /* Sticky Transmit Overflow Status */
+#define TXHRE 0x0040 /* Transmit Hold Register Empty */
+
+/* SPORTx_MCMC1 Macros */
+#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */
+
+/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */
+#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */
+
+/* SPORTx_MCMC2 Masks */
+#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */
+#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */
+#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */
+#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */
+#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */
+#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */
+#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */
+#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */
+#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */
+#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */
+#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */
+#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */
+#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */
+#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */
+#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */
+#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */
+#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */
+#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */
+#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */
+#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */
+#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */
+#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */
+#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */
+
+
+/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
+/* EBIU_AMGCTL Masks */
+#define AMCKEN 0x0001 /* Enable CLKOUT */
+#define AMBEN_NONE 0x0000 /* All Banks Disabled */
+#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
+#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
+
+/* EBIU_AMBCTL0 Masks */
+#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */
+#define B0RDYPOL 0x00000002 /* B0 RDY Active High */
+#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */
+#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */
+#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */
+#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */
+#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */
+#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */
+#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */
+#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */
+#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */
+#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */
+#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */
+#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */
+#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */
+#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */
+#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */
+#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */
+#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */
+#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */
+#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */
+#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */
+#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */
+#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */
+#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */
+#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */
+#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */
+#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */
+#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */
+#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */
+#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */
+#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */
+#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */
+#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */
+#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */
+#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */
+
+#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */
+#define B1RDYPOL 0x00020000 /* B1 RDY Active High */
+#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */
+#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */
+#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */
+#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */
+#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */
+#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */
+#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */
+#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */
+#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */
+#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */
+#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */
+#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */
+#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */
+#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */
+#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */
+#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */
+#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */
+#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */
+#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */
+#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */
+#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */
+#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */
+#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */
+#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */
+#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */
+#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */
+#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */
+#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */
+#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */
+#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */
+#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */
+#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */
+#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */
+#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */
+
+/* EBIU_AMBCTL1 Masks */
+#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */
+#define B2RDYPOL 0x00000002 /* B2 RDY Active High */
+#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */
+#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */
+#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */
+#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */
+#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */
+#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */
+#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */
+#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */
+#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */
+#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */
+#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */
+#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */
+#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */
+#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */
+#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */
+#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */
+#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */
+#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */
+#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */
+#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */
+#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */
+#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */
+#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */
+#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */
+#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */
+#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */
+#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */
+#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */
+#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */
+#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */
+#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */
+#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */
+#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */
+#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */
+
+#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */
+#define B3RDYPOL 0x00020000 /* B3 RDY Active High */
+#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */
+#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */
+#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */
+#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */
+#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */
+#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */
+#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */
+#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */
+#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */
+#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */
+#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */
+#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */
+#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */
+#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */
+#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */
+#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */
+#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */
+#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */
+#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */
+#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */
+#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */
+#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */
+#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */
+#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */
+#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */
+#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */
+#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */
+#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */
+#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */
+#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */
+#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */
+#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */
+#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */
+#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */
+#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */
+#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */
+#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */
+#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */
+#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */
+#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */
+#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */
+#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */
+
+
+/* ********************** SDRAM CONTROLLER MASKS **********************************************/
+/* EBIU_SDGCTL Masks */
+#define SCTLE 0x00000001 /* Enable SDRAM Signals */
+#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */
+#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */
+#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */
+#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */
+#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */
+#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
+#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
+#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
+#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
+#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
+#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
+#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
+#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
+#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
+#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
+#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
+#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
+#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
+#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
+#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
+#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
+#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
+#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
+#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
+#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
+#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
+#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
+#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
+#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
+#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
+#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
+#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
+#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
+#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
+#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
+#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
+#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
+#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */
+#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */
+#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */
+#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */
+#define EBUFE 0x02000000 /* Enable External Buffering Timing */
+#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */
+#define EMREN 0x10000000 /* Extended Mode Register Enable */
+#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */
+#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */
+
+/* EBIU_SDBCTL Masks */
+#define EBE 0x0001 /* Enable SDRAM External Bank */
+#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */
+#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */
+#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */
+#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */
+#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */
+#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */
+#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */
+#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */
+#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */
+#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */
+
+/* EBIU_SDSTAT Masks */
+#define SDCI 0x0001 /* SDRAM Controller Idle */
+#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */
+#define SDPUA 0x0004 /* SDRAM Power-Up Active */
+#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */
+#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */
+#define BGSTAT 0x0020 /* Bus Grant Status */
+
+
+/* ************************** DMA CONTROLLER MASKS ********************************/
+/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
+#define DMAEN 0x0001 /* DMA Channel Enable */
+#define WNR 0x0002 /* Channel Direction (W/R*) */
+#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
+#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
+#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
+#define RESTART 0x0020 /* DMA Buffer Clear */
+#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
+#define DI_EN 0x0080 /* Data Interrupt Enable */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+#define NDSIZE 0x0900 /* Next Descriptor Size */
+#define DMAFLOW 0x7000 /* Flow Control */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
+
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
+#define PMAP 0xF000 /* Peripheral Mapped To This Channel */
+#define PMAP_PPI 0x0000 /* PPI Port DMA */
+#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */
+#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */
+#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */
+#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */
+#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */
+#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */
+#define PMAP_SPI 0x7000 /* SPI Port DMA */
+#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */
+#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */
+#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
+#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
+
+/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
+#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
+#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
+#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
+#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
+
+
+/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
+/* PPI_CONTROL Masks */
+#define PORT_EN 0x0001 /* PPI Port Enable */
+#define PORT_DIR 0x0002 /* PPI Port Direction */
+#define XFR_TYPE 0x000C /* PPI Transfer Type */
+#define PORT_CFG 0x0030 /* PPI Port Configuration */
+#define FLD_SEL 0x0040 /* PPI Active Field Select */
+#define PACK_EN 0x0080 /* PPI Packing Mode */
+#define DMA32 0x0100 /* PPI 32-bit DMA Enable */
+#define SKIP_EN 0x0200 /* PPI Skip Element Enable */
+#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */
+#define DLEN_8 0x0000 /* Data Length = 8 Bits */
+#define DLEN_10 0x0800 /* Data Length = 10 Bits */
+#define DLEN_11 0x1000 /* Data Length = 11 Bits */
+#define DLEN_12 0x1800 /* Data Length = 12 Bits */
+#define DLEN_13 0x2000 /* Data Length = 13 Bits */
+#define DLEN_14 0x2800 /* Data Length = 14 Bits */
+#define DLEN_15 0x3000 /* Data Length = 15 Bits */
+#define DLEN_16 0x3800 /* Data Length = 16 Bits */
+#define DLENGTH 0x3800 /* PPI Data Length */
+#define POLC 0x4000 /* PPI Clock Polarity */
+#define POLS 0x8000 /* PPI Frame Sync Polarity */
+
+/* PPI_STATUS Masks */
+#define FLD 0x0400 /* Field Indicator */
+#define FT_ERR 0x0800 /* Frame Track Error */
+#define OVR 0x1000 /* FIFO Overflow Error */
+#define UNDR 0x2000 /* FIFO Underrun Error */
+#define ERR_DET 0x4000 /* Error Detected Indicator */
+#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
+
+
+/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
+#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
+#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
+#define TWI_ENA 0x0080 /* TWI Enable */
+#define SCCB 0x0200 /* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTRL Masks */
+#define SEN 0x0001 /* Slave Enable */
+#define SADD_LEN 0x0002 /* Slave Address Length */
+#define STDVAL 0x0004 /* Slave Transmit Data Valid */
+#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
+#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks */
+#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL 0x0002 /* General Call Indicator */
+
+/* TWI_MASTER_CTRL Masks */
+#define MEN 0x0001 /* Master Mode Enable */
+#define MADD_LEN 0x0002 /* Master Address Length */
+#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
+#define FAST 0x0008 /* Use Fast Mode Timing Specs */
+#define STOP 0x0010 /* Issue Stop Condition */
+#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
+#define DCNT 0x3FC0 /* Data Bytes To Transfer */
+#define SDAOVR 0x4000 /* Serial Data Override */
+#define SCLOVR 0x8000 /* Serial Clock Override */
+
+/* TWI_MASTER_STAT Masks */
+#define MPROG 0x0001 /* Master Transfer In Progress */
+#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
+#define ANAK 0x0004 /* Address Not Acknowledged */
+#define DNAK 0x0008 /* Data Not Acknowledged */
+#define BUFRDERR 0x0010 /* Buffer Read Error */
+#define BUFWRERR 0x0020 /* Buffer Write Error */
+#define SDASEN 0x0040 /* Serial Data Sense */
+#define SCLSEN 0x0080 /* Serial Clock Sense */
+#define BUSBUSY 0x0100 /* Bus Busy Indicator */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
+#define SINIT 0x0001 /* Slave Transfer Initiated */
+#define SCOMP 0x0002 /* Slave Transfer Complete */
+#define SERR 0x0004 /* Slave Transfer Error */
+#define SOVF 0x0008 /* Slave Overflow */
+#define MCOMP 0x0010 /* Master Transfer Complete */
+#define MERR 0x0020 /* Master Transfer Error */
+#define XMTSERV 0x0040 /* Transmit FIFO Service */
+#define RCVSERV 0x0080 /* Receive FIFO Service */
+
+/* TWI_FIFO_CTRL Masks */
+#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
+#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
+#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
+#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
+
+/* TWI_FIFO_STAT Masks */
+#define XMTSTAT 0x0003 /* Transmit FIFO Status */
+#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
+#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
+#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+
+#define RCVSTAT 0x000C /* Receive FIFO Status */
+#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
+#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
+#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+
+
+/* ******************* PIN CONTROL REGISTER MASKS ************************/
+/* PORT_MUX Masks */
+#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
+#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */
+#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */
+
+#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */
+#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */
+#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */
+#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */
+
+#define PFDE 0x0008 /* Port F DMA Request Enable */
+#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */
+#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */
+
+#define PFTE 0x0010 /* Port F Timer Enable */
+#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */
+#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */
+
+#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */
+#define PFS6E_TIMER 0x0000 /* Enable TMR5 */
+#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */
+
+#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */
+#define PFS5E_TIMER 0x0000 /* Enable TMR4 */
+#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */
+
+#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */
+#define PFS4E_TIMER 0x0000 /* Enable TMR3 */
+#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */
+
+#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */
+#define PFFE_TIMER 0x0000 /* Enable TMR2 */
+#define PFFE_PPI 0x0100 /* Enable PPI FS3 */
+
+#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */
+#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */
+#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */
+
+#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */
+#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */
+#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */
+
+#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */
+#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */
+#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */
+
+
+/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/
+/* HDMAx_CTL Masks */
+#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */
+#define REP 0x0002 /* HDMA Request Polarity */
+#define UTE 0x0004 /* Urgency Threshold Enable */
+#define OIE 0x0010 /* Overflow Interrupt Enable */
+#define BDIE 0x0020 /* Block Done Interrupt Enable */
+#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */
+#define DRQ 0x0300 /* HDMA Request Type */
+#define DRQ_NONE 0x0000 /* No Request */
+#define DRQ_SINGLE 0x0100 /* Channels Request Single */
+#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */
+#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */
+#define RBC 0x1000 /* Reload BCNT With IBCNT */
+#define PS 0x2000 /* HDMA Pin Status */
+#define OI 0x4000 /* Overflow Interrupt Generated */
+#define BDI 0x8000 /* Block Done Interrupt Generated */
+
+/* entry addresses of the user-callable Boot ROM functions */
+
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
+#define _BOOTROM_DO_MEMORY_DMA 0xEF000006
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
+#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
+#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
+#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
+
+/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
+#define PGDE_UART PFDE_UART
+#define PGDE_DMA PFDE_DMA
+#define CKELOW SCKELOW
+
+/* HOST Port Registers */
+
+#define HOST_CONTROL 0xffc03400 /* HOST Control Register */
+#define HOST_STATUS 0xffc03404 /* HOST Status Register */
+#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */
+
+/* Counter Registers */
+
+#define CNT_CONFIG 0xffc03500 /* Configuration Register */
+#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */
+#define CNT_STATUS 0xffc03508 /* Status Register */
+#define CNT_COMMAND 0xffc0350c /* Command Register */
+#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */
+#define CNT_COUNTER 0xffc03514 /* Counter Register */
+#define CNT_MAX 0xffc03518 /* Maximal Count Register */
+#define CNT_MIN 0xffc0351c /* Minimal Count Register */
+
+/* OTP/FUSE Registers */
+
+#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */
+#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */
+#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */
+#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */
+
+/* Security Registers */
+
+#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */
+#define SECURE_CONTROL 0xffc03624 /* Secure Control */
+#define SECURE_STATUS 0xffc03628 /* Secure Status */
+
+/* OTP Read/Write Data Buffer Registers */
+
+#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */
+
+/* Motor Control PWM Registers */
+
+#define PWM_CTRL 0xffc03700 /* PWM Control Register */
+#define PWM_STAT 0xffc03704 /* PWM Status Register */
+#define PWM_TM 0xffc03708 /* PWM Period Register */
+#define PWM_DT 0xffc0370c /* PWM Dead Time Register */
+#define PWM_GATE 0xffc03710 /* PWM Chopping Control */
+#define PWM_CHA 0xffc03714 /* PWM Channel A Duty Control */
+#define PWM_CHB 0xffc03718 /* PWM Channel B Duty Control */
+#define PWM_CHC 0xffc0371c /* PWM Channel C Duty Control */
+#define PWM_SEG 0xffc03720 /* PWM Crossover and Output Enable */
+#define PWM_SYNCWT 0xffc03724 /* PWM Sync Pluse Width Control */
+#define PWM_CHAL 0xffc03728 /* PWM Channel AL Duty Control (SR mode only) */
+#define PWM_CHBL 0xffc0372c /* PWM Channel BL Duty Control (SR mode only) */
+#define PWM_CHCL 0xffc03730 /* PWM Channel CL Duty Control (SR mode only) */
+#define PWM_LSI 0xffc03734 /* PWM Low Side Invert (SR mode only) */
+#define PWM_STAT2 0xffc03738 /* PWM Status Register 2 */
+
+
+/* ********************************************************** */
+/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
+/* and MULTI BIT READ MACROS */
+/* ********************************************************** */
+
+/* Bit masks for HOST_CONTROL */
+
+#define HOST_CNTR_HOST_EN 0x1 /* Host Enable */
+#define HOST_CNTR_nHOST_EN 0x0
+#define HOST_CNTR_HOST_END 0x2 /* Host Endianess */
+#define HOST_CNTR_nHOST_END 0x0
+#define HOST_CNTR_DATA_SIZE 0x4 /* Data Size */
+#define HOST_CNTR_nDATA_SIZE 0x0
+#define HOST_CNTR_HOST_RST 0x8 /* Host Reset */
+#define HOST_CNTR_nHOST_RST 0x0
+#define HOST_CNTR_HRDY_OVR 0x20 /* Host Ready Override */
+#define HOST_CNTR_nHRDY_OVR 0x0
+#define HOST_CNTR_INT_MODE 0x40 /* Interrupt Mode */
+#define HOST_CNTR_nINT_MODE 0x0
+#define HOST_CNTR_BT_EN 0x80 /* Bus Timeout Enable */
+#define HOST_CNTR_ nBT_EN 0x0
+#define HOST_CNTR_EHW 0x100 /* Enable Host Write */
+#define HOST_CNTR_nEHW 0x0
+#define HOST_CNTR_EHR 0x200 /* Enable Host Read */
+#define HOST_CNTR_nEHR 0x0
+#define HOST_CNTR_BDR 0x400 /* Burst DMA Requests */
+#define HOST_CNTR_nBDR 0x0
+
+/* Bit masks for HOST_STATUS */
+
+#define HOST_STAT_READY 0x1 /* DMA Ready */
+#define HOST_STAT_nREADY 0x0
+#define HOST_STAT_FIFOFULL 0x2 /* FIFO Full */
+#define HOST_STAT_nFIFOFULL 0x0
+#define HOST_STAT_FIFOEMPTY 0x4 /* FIFO Empty */
+#define HOST_STAT_nFIFOEMPTY 0x0
+#define HOST_STAT_COMPLETE 0x8 /* DMA Complete */
+#define HOST_STAT_nCOMPLETE 0x0
+#define HOST_STAT_HSHK 0x10 /* Host Handshake */
+#define HOST_STAT_nHSHK 0x0
+#define HOST_STAT_TIMEOUT 0x20 /* Host Timeout */
+#define HOST_STAT_nTIMEOUT 0x0
+#define HOST_STAT_HIRQ 0x40 /* Host Interrupt Request */
+#define HOST_STAT_nHIRQ 0x0
+#define HOST_STAT_ALLOW_CNFG 0x80 /* Allow New Configuration */
+#define HOST_STAT_nALLOW_CNFG 0x0
+#define HOST_STAT_DMA_DIR 0x100 /* DMA Direction */
+#define HOST_STAT_nDMA_DIR 0x0
+#define HOST_STAT_BTE 0x200 /* Bus Timeout Enabled */
+#define HOST_STAT_nBTE 0x0
+#define HOST_STAT_HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */
+#define HOST_STAT_nHOSTRD_DONE 0x0
+
+/* Bit masks for HOST_TIMEOUT */
+
+#define HOST_COUNT_TIMEOUT 0x7ff /* Host Timeout count */
+
+/* Bit masks for CNT_CONFIG */
+
+#define CNTE 0x1 /* Counter Enable */
+#define nCNTE 0x0
+#define DEBE 0x2 /* Debounce Enable */
+#define nDEBE 0x0
+#define CDGINV 0x10 /* CDG Pin Polarity Invert */
+#define nCDGINV 0x0
+#define CUDINV 0x20 /* CUD Pin Polarity Invert */
+#define nCUDINV 0x0
+#define CZMINV 0x40 /* CZM Pin Polarity Invert */
+#define nCZMINV 0x0
+#define CNTMODE 0x700 /* Counter Operating Mode */
+#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
+#define nZMZC 0x0
+#define BNDMODE 0x3000 /* Boundary register Mode */
+#define INPDIS 0x8000 /* CUG and CDG Input Disable */
+#define nINPDIS 0x0
+
+/* Bit masks for CNT_IMASK */
+
+#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
+#define nICIE 0x0
+#define UCIE 0x2 /* Up count Interrupt Enable */
+#define nUCIE 0x0
+#define DCIE 0x4 /* Down count Interrupt Enable */
+#define nDCIE 0x0
+#define MINCIE 0x8 /* Min Count Interrupt Enable */
+#define nMINCIE 0x0
+#define MAXCIE 0x10 /* Max Count Interrupt Enable */
+#define nMAXCIE 0x0
+#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
+#define nCOV31IE 0x0
+#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
+#define nCOV15IE 0x0
+#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
+#define nCZEROIE 0x0
+#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
+#define nCZMIE 0x0
+#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
+#define nCZMEIE 0x0
+#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
+#define nCZMZIE 0x0
+
+/* Bit masks for CNT_STATUS */
+
+#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
+#define nICII 0x0
+#define UCII 0x2 /* Up count Interrupt Identifier */
+#define nUCII 0x0
+#define DCII 0x4 /* Down count Interrupt Identifier */
+#define nDCII 0x0
+#define MINCII 0x8 /* Min Count Interrupt Identifier */
+#define nMINCII 0x0
+#define MAXCII 0x10 /* Max Count Interrupt Identifier */
+#define nMAXCII 0x0
+#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
+#define nCOV31II 0x0
+#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
+#define nCOV15II 0x0
+#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
+#define nCZEROII 0x0
+#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
+#define nCZMII 0x0
+#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
+#define nCZMEII 0x0
+#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
+#define nCZMZII 0x0
+
+/* Bit masks for CNT_COMMAND */
+
+#define W1LCNT 0xf /* Load Counter Register */
+#define W1LMIN 0xf0 /* Load Min Register */
+#define W1LMAX 0xf00 /* Load Max Register */
+#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
+#define nW1ZMONCE 0x0
+
+/* Bit masks for CNT_DEBOUNCE */
+
+#define DPRESCALE 0xf /* Load Counter Register */
+
+/* CNT_COMMAND bit field options */
+
+#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */
+#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */
+#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */
+
+#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */
+#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */
+#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */
+
+#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */
+#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */
+#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */
+
+/* CNT_CONFIG bit field options */
+
+#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */
+#define CNTMODE_BINENC 0x0100 /* binary encoder mode */
+#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */
+#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */
+#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */
+
+#define BNDMODE_COMP 0x0000 /* boundary compare mode */
+#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */
+#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
+#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
+
+/* Bit masks for OTP_CONTROL */
+
+#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
+#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
+#define nFIEN 0x0
+#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
+#define nFTESTDEC 0x0
+#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
+#define nFWRTEST 0x0
+#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
+#define nFRDEN 0x0
+#define FWREN 0x8000 /* OTP/Fuse Write Enable */
+#define nFWREN 0x0
+
+/* Bit masks for OTP_BEN */
+
+#define FBEN 0xffff /* OTP/Fuse Byte Enable */
+
+/* Bit masks for OTP_STATUS */
+
+#define FCOMP 0x1 /* OTP/Fuse Access Complete */
+#define nFCOMP 0x0
+#define FERROR 0x2 /* OTP/Fuse Access Error */
+#define nFERROR 0x0
+#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
+#define nMMRGLOAD 0x0
+#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
+#define nMMRGLOCK 0x0
+#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
+#define nFPGMEN 0x0
+
+/* Bit masks for OTP_TIMING */
+
+#define USECDIV 0xff /* Micro Second Divider */
+#define READACC 0x7f00 /* Read Access Time */
+#define CPUMPRL 0x38000 /* Charge Pump Release Time */
+#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
+#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
+#define PGMTIME 0xff000000 /* Program Time */
+
+/* Bit masks for SECURE_SYSSWT */
+
+#define EMUDABL 0x1 /* Emulation Disable. */
+#define nEMUDABL 0x0
+#define RSTDABL 0x2 /* Reset Disable */
+#define nRSTDABL 0x0
+#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
+#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
+#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
+#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
+#define nDMA0OVR 0x0
+#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
+#define nDMA1OVR 0x0
+#define EMUOVR 0x4000 /* Emulation Override */
+#define nEMUOVR 0x0
+#define OTPSEN 0x8000 /* OTP Secrets Enable. */
+#define nOTPSEN 0x0
+#define L2DABL 0x70000 /* L2 Memory Disable. */
+
+/* Bit masks for SECURE_CONTROL */
+
+#define SECURE0 0x1 /* SECURE 0 */
+#define nSECURE0 0x0
+#define SECURE1 0x2 /* SECURE 1 */
+#define nSECURE1 0x0
+#define SECURE2 0x4 /* SECURE 2 */
+#define nSECURE2 0x0
+#define SECURE3 0x8 /* SECURE 3 */
+#define nSECURE3 0x0
+
+/* Bit masks for SECURE_STATUS */
+
+#define SECMODE 0x3 /* Secured Mode Control State */
+#define NMI 0x4 /* Non Maskable Interrupt */
+#define nNMI 0x0
+#define AFVALID 0x8 /* Authentication Firmware Valid */
+#define nAFVALID 0x0
+#define AFEXIT 0x10 /* Authentication Firmware Exit */
+#define nAFEXIT 0x0
+#define SECSTAT 0xe0 /* Secure Status */
+
+
+
+#endif /* _DEF_BF51X_H */
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf518/dma.h
+ * based on: include/asm-blackfin/mach-bf527/dma.h
+ * author: Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ * system DMA map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define MAX_BLACKFIN_DMA_CHANNEL 16
+
+#define CH_PPI 0 /* PPI receive/transmit */
+#define CH_EMAC_RX 1 /* Ethernet MAC receive */
+#define CH_EMAC_TX 2 /* Ethernet MAC transmit */
+#define CH_SPORT0_RX 3 /* SPORT0 receive */
+#define CH_SPORT0_TX 4 /* SPORT0 transmit */
+#define CH_RSI 4 /* RSI */
+#define CH_SPORT1_RX 5 /* SPORT1 receive */
+#define CH_SPI1 5 /* SPI1 transmit/receive */
+#define CH_SPORT1_TX 6 /* SPORT1 transmit */
+#define CH_SPI0 7 /* SPI0 transmit/receive */
+#define CH_UART0_RX 8 /* UART0 receive */
+#define CH_UART0_TX 9 /* UART0 transmit */
+#define CH_UART1_RX 10 /* UART1 receive */
+#define CH_UART1_TX 11 /* UART1 transmit */
+
+#define CH_MEM_STREAM0_SRC 12 /* RX */
+#define CH_MEM_STREAM0_DEST 13 /* TX */
+#define CH_MEM_STREAM1_SRC 14 /* RX */
+#define CH_MEM_STREAM1_DEST 15 /* TX */
+
+#endif
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf518/irq.h
+ * based on: include/asm-blackfin/mach-bf527/irq.h
+ * author: Michael Hennerich (michael.hennerich@analog.com)
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF518_IRQ_H_
+#define _BF518_IRQ_H_
+
+/*
+ * Interrupt source definitions
+ Event Source Core Event Name
+ Core Emulation **
+ Events (highest priority) EMU 0
+ Reset RST 1
+ NMI NMI 2
+ Exception EVX 3
+ Reserved -- 4
+ Hardware Error IVHW 5
+ Core Timer IVTMR 6 *
+
+ .....
+
+ Software Interrupt 1 IVG14 31
+ Software Interrupt 2 --
+ (lowest priority) IVG15 32 *
+*/
+
+#define NR_PERI_INTS (2 * 32)
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU 0 /* Emulation */
+#define IRQ_RST 1 /* reset */
+#define IRQ_NMI 2 /* Non Maskable */
+#define IRQ_EVX 3 /* Exception */
+#define IRQ_UNUSED 4 /* - unused interrupt */
+#define IRQ_HWERR 5 /* Hardware Error */
+#define IRQ_CORETMR 6 /* Core timer */
+
+#define BFIN_IRQ(x) ((x) + 7)
+
+#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
+#define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */
+#define IRQ_DMAR0_BLK BFIN_IRQ(2) /* DMAR0 Block Interrupt */
+#define IRQ_DMAR1_BLK BFIN_IRQ(3) /* DMAR1 Block Interrupt */
+#define IRQ_DMAR0_OVR BFIN_IRQ(4) /* DMAR0 Overflow Error */
+#define IRQ_DMAR1_OVR BFIN_IRQ(5) /* DMAR1 Overflow Error */
+#define IRQ_PPI_ERROR BFIN_IRQ(6) /* PPI Error */
+#define IRQ_MAC_ERROR BFIN_IRQ(7) /* MAC Status */
+#define IRQ_SPORT0_ERROR BFIN_IRQ(8) /* SPORT0 Status */
+#define IRQ_SPORT1_ERROR BFIN_IRQ(9) /* SPORT1 Status */
+#define IRQ_PTP_ERROR BFIN_IRQ(10) /* PTP Error Interrupt */
+#define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */
+#define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */
+#define IRQ_RTC BFIN_IRQ(14) /* RTC */
+#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI) */
+#define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */
+#define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */
+#define IRQ_RSI BFIN_IRQ(17) /* DMA 4 Channel (RSI) */
+#define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX/SPI) */
+#define IRQ_SPI1 BFIN_IRQ(18) /* DMA 5 Channel (SPI1) */
+#define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */
+#define IRQ_TWI BFIN_IRQ(20) /* TWI */
+#define IRQ_SPI0 BFIN_IRQ(21) /* DMA 7 Channel (SPI0) */
+#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */
+#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */
+#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */
+#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */
+#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */
+#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */
+#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX) */
+#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */
+#define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX) */
+#define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */
+#define IRQ_TMR0 BFIN_IRQ(32) /* Timer 0 */
+#define IRQ_TMR1 BFIN_IRQ(33) /* Timer 1 */
+#define IRQ_TMR2 BFIN_IRQ(34) /* Timer 2 */
+#define IRQ_TMR3 BFIN_IRQ(35) /* Timer 3 */
+#define IRQ_TMR4 BFIN_IRQ(36) /* Timer 4 */
+#define IRQ_TMR5 BFIN_IRQ(37) /* Timer 5 */
+#define IRQ_TMR6 BFIN_IRQ(38) /* Timer 6 */
+#define IRQ_TMR7 BFIN_IRQ(39) /* Timer 7 */
+#define IRQ_PORTG_INTA BFIN_IRQ(40) /* Port G Interrupt A */
+#define IRQ_PORTG_INTB BFIN_IRQ(41) /* Port G Interrupt B */
+#define IRQ_MEM_DMA0 BFIN_IRQ(42) /* MDMA Stream 0 */
+#define IRQ_MEM_DMA1 BFIN_IRQ(43) /* MDMA Stream 1 */
+#define IRQ_WATCH BFIN_IRQ(44) /* Software Watchdog Timer */
+#define IRQ_PORTF_INTA BFIN_IRQ(45) /* Port F Interrupt A */
+#define IRQ_PORTF_INTB BFIN_IRQ(46) /* Port F Interrupt B */
+#define IRQ_SPI0_ERROR BFIN_IRQ(47) /* SPI0 Status */
+#define IRQ_SPI1_ERROR BFIN_IRQ(48) /* SPI1 Error */
+#define IRQ_RSI_INT0 BFIN_IRQ(51) /* RSI Interrupt0 */
+#define IRQ_RSI_INT1 BFIN_IRQ(52) /* RSI Interrupt1 */
+#define IRQ_PWM_TRIP BFIN_IRQ(53) /* PWM Trip Interrupt */
+#define IRQ_PWM_SYNC BFIN_IRQ(54) /* PWM Sync Interrupt */
+#define IRQ_PTP_STAT BFIN_IRQ(55) /* PTP Stat Interrupt */
+
+#define SYS_IRQS BFIN_IRQ(63) /* 70 */
+
+#define IRQ_PF0 71
+#define IRQ_PF1 72
+#define IRQ_PF2 73
+#define IRQ_PF3 74
+#define IRQ_PF4 75
+#define IRQ_PF5 76
+#define IRQ_PF6 77
+#define IRQ_PF7 78
+#define IRQ_PF8 79
+#define IRQ_PF9 80
+#define IRQ_PF10 81
+#define IRQ_PF11 82
+#define IRQ_PF12 83
+#define IRQ_PF13 84
+#define IRQ_PF14 85
+#define IRQ_PF15 86
+
+#define IRQ_PG0 87
+#define IRQ_PG1 88
+#define IRQ_PG2 89
+#define IRQ_PG3 90
+#define IRQ_PG4 91
+#define IRQ_PG5 92
+#define IRQ_PG6 93
+#define IRQ_PG7 94
+#define IRQ_PG8 95
+#define IRQ_PG9 96
+#define IRQ_PG10 97
+#define IRQ_PG11 98
+#define IRQ_PG12 99
+#define IRQ_PG13 100
+#define IRQ_PG14 101
+#define IRQ_PG15 102
+
+#define IRQ_PH0 103
+#define IRQ_PH1 104
+#define IRQ_PH2 105
+#define IRQ_PH3 106
+#define IRQ_PH4 107
+#define IRQ_PH5 108
+#define IRQ_PH6 109
+#define IRQ_PH7 110
+#define IRQ_PH8 111
+#define IRQ_PH9 112
+#define IRQ_PH10 113
+#define IRQ_PH11 114
+#define IRQ_PH12 115
+#define IRQ_PH13 116
+#define IRQ_PH14 117
+#define IRQ_PH15 118
+
+#define GPIO_IRQ_BASE IRQ_PF0
+
+#define NR_IRQS (IRQ_PH15 + 1)
+
+#define IVG7 7
+#define IVG8 8
+#define IVG9 9
+#define IVG10 10
+#define IVG11 11
+#define IVG12 12
+#define IVG13 13
+#define IVG14 14
+#define IVG15 15
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS 0
+#define IRQ_DMA0_ERROR_POS 4
+#define IRQ_DMAR0_BLK_POS 8
+#define IRQ_DMAR1_BLK_POS 12
+#define IRQ_DMAR0_OVR_POS 16
+#define IRQ_DMAR1_OVR_POS 20
+#define IRQ_PPI_ERROR_POS 24
+#define IRQ_MAC_ERROR_POS 28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_SPORT0_ERROR_POS 0
+#define IRQ_SPORT1_ERROR_POS 4
+#define IRQ_PTP_ERROR_POS 8
+#define IRQ_UART0_ERROR_POS 16
+#define IRQ_UART1_ERROR_POS 20
+#define IRQ_RTC_POS 24
+#define IRQ_PPI_POS 28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_SPORT0_RX_POS 0
+#define IRQ_SPORT0_TX_POS 4
+#define IRQ_RSI_POS 4
+#define IRQ_SPORT1_RX_POS 8
+#define IRQ_SPI1_POS 8
+#define IRQ_SPORT1_TX_POS 12
+#define IRQ_TWI_POS 16
+#define IRQ_SPI0_POS 20
+#define IRQ_UART0_RX_POS 24
+#define IRQ_UART0_TX_POS 28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_UART1_RX_POS 0
+#define IRQ_UART1_TX_POS 4
+#define IRQ_OPTSEC_POS 8
+#define IRQ_CNT_POS 12
+#define IRQ_MAC_RX_POS 16
+#define IRQ_PORTH_INTA_POS 20
+#define IRQ_MAC_TX_POS 24
+#define IRQ_PORTH_INTB_POS 28
+
+/* IAR4 BIT FIELDS */
+#define IRQ_TMR0_POS 0
+#define IRQ_TMR1_POS 4
+#define IRQ_TMR2_POS 8
+#define IRQ_TMR3_POS 12
+#define IRQ_TMR4_POS 16
+#define IRQ_TMR5_POS 20
+#define IRQ_TMR6_POS 24
+#define IRQ_TMR7_POS 28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_PORTG_INTA_POS 0
+#define IRQ_PORTG_INTB_POS 4
+#define IRQ_MEM_DMA0_POS 8
+#define IRQ_MEM_DMA1_POS 12
+#define IRQ_WATCH_POS 16
+#define IRQ_PORTF_INTA_POS 20
+#define IRQ_PORTF_INTB_POS 24
+#define IRQ_SPI0_ERROR_POS 28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_SPI1_ERROR_POS 0
+#define IRQ_RSI_INT0_POS 12
+#define IRQ_RSI_INT1_POS 16
+#define IRQ_PWM_TRIP_POS 20
+#define IRQ_PWM_SYNC_POS 24
+#define IRQ_PTP_STAT_POS 28
+
+#endif /* _BF518_IRQ_H_ */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf518/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || CONFIG_MEM_MT48LC16M8A2TG_75 || CONFIG_MEM_GENERIC_BOARD || CONFIG_MEM_MT48LC32M8A2_75 || CONFIG_MEM_MT48LC32M16A2TG_75)
+#if (CONFIG_SCLK_HZ > 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_7
+#define SDRAM_tRAS_num 7
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_6
+#define SDRAM_tRAS_num 6
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_5
+#define SDRAM_tRAS_num 5
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 4
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866)
+#define SDRAM_tRP TRP_2
+#define SDRAM_tRP_num 2
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_2
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_4
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_3
+#define SDRAM_tRAS_num 3
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_2
+#define SDRAM_tRAS_num 2
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#if (CONFIG_SCLK_HZ <= 29850746)
+#define SDRAM_tRP TRP_1
+#define SDRAM_tRP_num 1
+#define SDRAM_tRAS TRAS_1
+#define SDRAM_tRAS_num 1
+#define SDRAM_tRCD TRCD_1
+#define SDRAM_tWR TWR_2
+#endif
+#endif
+
+#if (CONFIG_MEM_MT48LC16M16A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC16M8A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M8A2_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC64M4A2FB_7E)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_GENERIC_BOARD)
+ /*SDRAM INFORMATION: Modify this for your board */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+#if (CONFIG_MEM_MT48LC32M16A2TG_75)
+ /*SDRAM INFORMATION: */
+#define SDRAM_Tref 64 /* Refresh period in milliseconds */
+#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */
+#define SDRAM_CL CL_3
+#endif
+
+/* Equation from section 17 (p17-46) of BF533 HRM */
+#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num)
+
+/* Enable SCLK Out */
+#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF 1
+#else
+#define CLKIN_HALF 0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS 1
+#else
+#define PLL_BYPASS 0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0 \
+ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf518/mem_map.h
+ * based on: include/asm-blackfin/mach-bf527/mem_map.h
+ * author: Bryan Wu <cooloney@kernel.org>
+ *
+ * created:
+ * description:
+ * Memory MAP Common header file for blackfin BF518/6/4/2 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_518_H_
+#define _MEM_MAP_518_H_
+
+#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
+#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */
+#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START 0xEF000000
+#define BOOT_ROM_LENGTH 0x8000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF518/6/4/2 processors */
+
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE (16 * 1024)
+#else
+#define BFIN_ICACHESIZE (0)
+#endif
+
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#define L1_CODE_LENGTH 0xC000
+
+#ifdef CONFIG_BFIN_DCACHE
+
+#ifdef CONFIG_BFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BFIN_DCACHESIZE (16 * 1024)
+#define BFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BFIN_DCACHESIZE (32 * 1024)
+#define BFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BFIN_DCACHESIZE 0
+#define BFIN_DSUPBANKS 0
+#endif /*CONFIG_BFIN_DCACHE */
+
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
+/* Scratch Pad Memory */
+
+#define L1_SCRATCH_START 0xFFB00000
+#define L1_SCRATCH_LENGTH 0x1000
+
+#endif /* _MEM_MAP_518_H_ */
--- /dev/null
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define MAX_RESOURCES MAX_BLACKFIN_GPIOS
+
+/* EMAC MII/RMII Port Mux */
+#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+
+#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_MII0_ETxEn (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_MII0_ETxCLK (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+
+#define P_MII {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxD2, \
+ P_MII0_ETxD3, \
+ P_MII0_ETxEN, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_COL, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxD2, \
+ P_MII0_ERxD3, \
+ P_MII0_ERxDV, \
+ P_MII0_ERxCLK, \
+ P_MII0_ERxER, \
+ P_MII0_CRS, \
+ P_MII0_MDC, \
+ P_MII0_MDIO, 0}
+
+#define P_RMII {\
+ P_MII0_ETxD0, \
+ P_MII0_ETxD1, \
+ P_MII0_ETxEN, \
+ P_MII0_ERxD0, \
+ P_MII0_ERxD1, \
+ P_MII0_ERxER, \
+ P_MII0_TxCLK, \
+ P_MII0_PHYINT, \
+ P_MII0_CRS, \
+ P_MII0_MDC, \
+ P_MII0_MDIO, 0}
+
+/* PPI Port Mux */
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+/* SPI Port Mux */
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(2))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2))
+
+#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+
+#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(2))
+#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(2))
+#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2))
+#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(2))
+#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(2))
+
+/* SPORT Port Mux */
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+
+/* UART Port Mux */
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(1))
+
+/* Timer */
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(2))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(2))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(2))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(2))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(2))
+
+/* DMA */
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+
+/* TWI */
+#define P_TWI0_SCL (P_DONTCARE)
+#define P_TWI0_SDA (P_DONTCARE)
+
+/* PWM */
+#define P_PWM0_AH (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(2))
+#define P_PWM0_AL (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(2))
+#define P_PWM0_BH (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(2))
+#define P_PWM0_BL (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(2))
+#define P_PWM0_CH (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(2))
+#define P_PWM0_CL (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(2))
+#define P_PWM0_SYNC (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(2))
+
+#define P_PWM1_AH (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(2))
+#define P_PWM1_AL (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(2))
+#define P_PWM1_BH (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(2))
+#define P_PWM1_BL (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(2))
+#define P_PWM1_CH (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2))
+#define P_PWM1_CL (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2))
+#define P_PWM1_SYNC (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(2))
+
+#define P_PWM_TRIPB (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(2))
+
+/* RSI */
+#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(2))
+#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(2))
+#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+
+/* PTP */
+#define P_PTP_PPS (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(2))
+#define P_PTP_CLKOUT (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(2))
+
+#define P_HWAIT (P_DEFINED | P_IDENT(GPIO_PG000000000) | P_FUNCT(1))
+
+#endif /* _MACH_PORTMUX_H_ */
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf518/ints-priority.c
+ * Based on: arch/blackfin/mach-bf527/ints-priority.c
+ * Author: Bryan Wu <cooloney@kernel.org>
+ *
+ * Created:
+ * Description: Set up the interrupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void __init program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMA0_ERROR - 7) << IRQ_DMA0_ERROR_POS) |
+ ((CONFIG_IRQ_DMAR0_BLK - 7) << IRQ_DMAR0_BLK_POS) |
+ ((CONFIG_IRQ_DMAR1_BLK - 7) << IRQ_DMAR1_BLK_POS) |
+ ((CONFIG_IRQ_DMAR0_OVR - 7) << IRQ_DMAR0_OVR_POS) |
+ ((CONFIG_IRQ_DMAR1_OVR - 7) << IRQ_DMAR1_OVR_POS) |
+ ((CONFIG_IRQ_PPI_ERROR - 7) << IRQ_PPI_ERROR_POS) |
+ ((CONFIG_IRQ_MAC_ERROR - 7) << IRQ_MAC_ERROR_POS));
+
+
+ bfin_write_SIC_IAR1(((CONFIG_IRQ_SPORT0_ERROR - 7) << IRQ_SPORT0_ERROR_POS) |
+ ((CONFIG_IRQ_SPORT1_ERROR - 7) << IRQ_SPORT1_ERROR_POS) |
+ ((CONFIG_IRQ_PTP_ERROR - 7) << IRQ_PTP_ERROR_POS) |
+ ((CONFIG_IRQ_UART0_ERROR - 7) << IRQ_UART0_ERROR_POS) |
+ ((CONFIG_IRQ_UART1_ERROR - 7) << IRQ_UART1_ERROR_POS) |
+ ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS) |
+ ((CONFIG_IRQ_PPI - 7) << IRQ_PPI_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+ ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+ ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+ ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+ ((CONFIG_IRQ_TWI - 7) << IRQ_TWI_POS) |
+ ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+ ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+ ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+ bfin_write_SIC_IAR3(((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+ ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+ ((CONFIG_IRQ_OPTSEC - 7) << IRQ_OPTSEC_POS) |
+ ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+ ((CONFIG_IRQ_MAC_RX - 7) << IRQ_MAC_RX_POS) |
+ ((CONFIG_IRQ_PORTH_INTA - 7) << IRQ_PORTH_INTA_POS) |
+ ((CONFIG_IRQ_MAC_TX - 7) << IRQ_MAC_TX_POS) |
+ ((CONFIG_IRQ_PORTH_INTB - 7) << IRQ_PORTH_INTB_POS));
+
+ bfin_write_SIC_IAR4(((CONFIG_IRQ_TMR0 - 7) << IRQ_TMR0_POS) |
+ ((CONFIG_IRQ_TMR1 - 7) << IRQ_TMR1_POS) |
+ ((CONFIG_IRQ_TMR2 - 7) << IRQ_TMR2_POS) |
+ ((CONFIG_IRQ_TMR3 - 7) << IRQ_TMR3_POS) |
+ ((CONFIG_IRQ_TMR4 - 7) << IRQ_TMR4_POS) |
+ ((CONFIG_IRQ_TMR5 - 7) << IRQ_TMR5_POS) |
+ ((CONFIG_IRQ_TMR6 - 7) << IRQ_TMR6_POS) |
+ ((CONFIG_IRQ_TMR7 - 7) << IRQ_TMR7_POS));
+
+ bfin_write_SIC_IAR5(((CONFIG_IRQ_PORTG_INTA - 7) << IRQ_PORTG_INTA_POS) |
+ ((CONFIG_IRQ_PORTG_INTB - 7) << IRQ_PORTG_INTB_POS) |
+ ((CONFIG_IRQ_MEM_DMA0 - 7) << IRQ_MEM_DMA0_POS) |
+ ((CONFIG_IRQ_MEM_DMA1 - 7) << IRQ_MEM_DMA1_POS) |
+ ((CONFIG_IRQ_WATCH - 7) << IRQ_WATCH_POS) |
+ ((CONFIG_IRQ_PORTF_INTA - 7) << IRQ_PORTF_INTA_POS) |
+ ((CONFIG_IRQ_PORTF_INTB - 7) << IRQ_PORTF_INTB_POS) |
+ ((CONFIG_IRQ_SPI0_ERROR - 7) << IRQ_SPI0_ERROR_POS));
+
+ bfin_write_SIC_IAR6(((CONFIG_IRQ_SPI1_ERROR - 7) << IRQ_SPI1_ERROR_POS) |
+ ((CONFIG_IRQ_RSI_INT0 - 7) << IRQ_RSI_INT0_POS) |
+ ((CONFIG_IRQ_RSI_INT1 - 7) << IRQ_RSI_INT1_POS) |
+ ((CONFIG_IRQ_PWM_TRIP - 7) << IRQ_PWM_TRIP_POS) |
+ ((CONFIG_IRQ_PWM_SYNC - 7) << IRQ_PWM_SYNC_POS) |
+ ((CONFIG_IRQ_PTP_STAT - 7) << IRQ_PTP_STAT_POS));
+
+ SSYNC();
+}
ENTRY(_set_sic_iwr)
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \
- defined(CONFIG_BF538) || defined(CONFIG_BF539)
+ defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
P0.H = hi(SIC_IWR0);
P0.L = lo(SIC_IWR0);
P1.H = hi(SIC_IWR1);
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
int iar_shift = (irqn & 7) * 4;
if (ivg == (0xf &
-#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) || defined(CONFIG_BF539)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF538) \
+ || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
bfin_read32((unsigned long *)SIC_IAR0 +
((irqn % 32) >> 3) + ((irqn / 32) *
((SIC_IAR4 - SIC_IAR0) / 4))) >> iar_shift)) {
case IRQ_PORTF_INTA:
irq = IRQ_PF0;
break;
-#elif defined(CONFIG_BF52x)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
case IRQ_PORTF_INTA:
irq = IRQ_PF0;
break;
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || defined(BF538_FAMILY)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
+ || defined(BF538_FAMILY) || defined(CONFIG_BF51x)
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
# ifdef CONFIG_BF54x
case IRQ_PINT1:
case IRQ_PINT2:
case IRQ_PINT3:
-#elif defined(CONFIG_BF52x)
+#elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
case IRQ_PORTF_INTA:
case IRQ_PORTG_INTA:
case IRQ_PORTH_INTA:
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || defined(BF538_FAMILY)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
+ || defined(BF538_FAMILY) || defined(CONFIG_BF51x)
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x)
- /* BF52x system reset does not properly reset SIC_IWR1 which
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
+ /* BF52x/BF51x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
* http://blackfin.uclinux.org/gf/tracker/4323
} else {
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || defined(BF538_FAMILY)
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \
+ || defined(BF538_FAMILY) || defined(CONFIG_BF51x)
unsigned long sic_status[3];
sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
bfin_pm_standby_restore();
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) || \
- defined(CONFIG_BF538) || defined(CONFIG_BF539)
+ defined(CONFIG_BF538) || defined(CONFIG_BF539) || defined(CONFIG_BF51x)
bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
-#if defined(CONFIG_BF52x)
+#if defined(CONFIG_BF52x) || defined(CONFIG_BF51x)
/* BF52x system reset does not properly reset SIC_IWR1 which
* will screw up the bootrom as it relies on MDMA0/1 waking it
* up from IDLE instructions. See this report for more info:
projects / openwrt / staging / blogic.git / commitdiff