ARM: S5PV210: Use gpio_request_one

By using gpio_request_one it is possible to set the direction
and initial value in one shot. Thus, using gpio_request_one can
make the code simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 5811a96125f0afdff992b77536f0c60ea1b52c32..404ac7aec3c1899e93c440bc318401b44d560910 100644 (file)
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -595,8 +595,7 @@ static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
 
 static void aquila_setup_sdhci(void)
 {
-       gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
-       gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+       gpio_request_one(AQUILA_EXT_FLASH_EN, GPIOF_OUT_INIT_HIGH, "FLASH_EN");
 
        s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
        s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);

diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 15edcae448b9a81411dda546d48803875eb239b1..e2754e9bd6b49d66ab0a6aaa1b700e541955cbdd 100644 (file)
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -227,8 +227,7 @@ static void __init goni_radio_init(void)
        i2c1_devs[0].irq = gpio_to_irq(gpio);
 
        gpio = S5PV210_GPJ2(5);                 /* XMSMDATA_5 */
-       gpio_request(gpio, "FM_RST");
-       gpio_direction_output(gpio, 1);
+       gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "FM_RST");
 }
 
 /* TSP */
@@ -264,8 +263,7 @@ static void __init goni_tsp_init(void)
        int gpio;
 
        gpio = S5PV210_GPJ1(3);         /* XMSMADDR_11 */
-       gpio_request(gpio, "TSP_LDO_ON");
-       gpio_direction_output(gpio, 1);
+       gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
        gpio_export(gpio, 0);
 
        gpio = S5PV210_GPJ0(5);         /* XMSMADDR_5 */

diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index a9106c392398c1c61dc16f01914508b7b5a8956c..10a4ec6989c8a1d9651c1584ca3c3e42bbd90c15 100644 (file)
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -153,15 +153,12 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
 {
        if (power) {
 #if !defined(CONFIG_BACKLIGHT_PWM)
-               gpio_request(S5PV210_GPD0(3), "GPD0");
-               gpio_direction_output(S5PV210_GPD0(3), 1);
+               gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_HIGH, "GPD0");
                gpio_free(S5PV210_GPD0(3));
 #endif
 
                /* fire nRESET on power up */
-               gpio_request(S5PV210_GPH0(6), "GPH0");
-
-               gpio_direction_output(S5PV210_GPH0(6), 1);
+               gpio_request_one(S5PV210_GPH0(6), GPIOF_OUT_INIT_HIGH, "GPH0");
 
                gpio_set_value(S5PV210_GPH0(6), 0);
                mdelay(10);
@@ -172,8 +169,7 @@ static void smdkv210_lte480wv_set_power(struct plat_lcd_data *pd,
                gpio_free(S5PV210_GPH0(6));
        } else {
 #if !defined(CONFIG_BACKLIGHT_PWM)
-               gpio_request(S5PV210_GPD0(3), "GPD0");
-               gpio_direction_output(S5PV210_GPD0(3), 0);
+               gpio_request_one(S5PV210_GPD0(3), GPIOF_OUT_INIT_LOW, "GPD0");
                gpio_free(S5PV210_GPD0(3));
 #endif
        }