ath79: fix USB power GPIO for TP-Link TL-WR810N v1

The TP-Link TL-WR810N v1 is known to cause soft-brick on ath79 and
work fine for ar71xx [1]. On closer inspection, the only apparent
difference is the GPIO used for the USB regulator, which deviates
between the two targets.

This applies the value from ar71xx to ath79.

Tested successfully by a forum user.

[1] https://forum.openwrt.org/t/tp-link-tl-wr810n-v1-ath79/48267

Fixes: cdbf2de77768 ("ath79: Add support for TP-Link WR810N")
Fixes: FS#3522
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 6934d30cf8d95bc8652b4dcd8180d14e5e8e2417)

diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
index 7d77352f84626b831d7f6d652569bc1c5108e873..4190ceb2816b101df69d4607ee4a0c4b1b70dfc1 100644 (file)
--- a/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr810n-v1.dts
@@ -15,7 +15,7 @@
                regulator-name = "usb_vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
-               gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio 11 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 };