uqmi: Add support for specifying profile index

Update uqmi to latest version, which brings about support for
specifying a call profile index instead of APN. A specific index
different from 1 must be used for some service provider and modem
combinations.

Also change option dhcp to dhcpv6, since IPv4 now always uses DHCP,
replace option ipv6 with pdptype, which is less ambiguous, and
make autoconnect optional and default it to off for IPv6 due to it
not working with statically configured IPv6.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

diff --git a/package/network/utils/uqmi/Makefile b/package/network/utils/uqmi/Makefile
index 06d9ac2b2bac97e62afab76416614840358917cc..2b832d432bcb801274dc6896982f32a0143f3632 100644 (file)
--- a/package/network/utils/uqmi/Makefile
+++ b/package/network/utils/uqmi/Makefile
@@ -1,15 +1,15 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=uqmi
-PKG_VERSION:=2016-08-23
+PKG_VERSION:=2016-11-22
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL=$(LEDE_GIT)/project/uqmi.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=eb1dec7d0dc283a7f61aa574a443a0ab61f8793f
+PKG_SOURCE_VERSION:=d682e966615fc652da6e4e26b57aa3adfebeb2fe
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.xz
-PKG_MIRROR_MD5SUM:=e6273e6aee6fce419e13f84439c240d48c32020fce7f07b2dc123ae32742382c
+PKG_MIRROR_MD5SUM:=a82c4682d07870d1bdf63e475afe1c1fffabf0954a49e0e67058dae0d4f6f71c
 PKG_MAINTAINER:=Matti Laakso <malaakso@elisanet.fi>
 
 PKG_LICENSE:=GPL-2.0

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index 12356989a2d52f8639fc1335edd35ac4a4159d5c..05b92425ad67c85a601896e9dad3f205beb53ab0 100755 (executable)
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -15,24 +15,22 @@ proto_qmi_init_config() {
        proto_config_add_string username
        proto_config_add_string password
        proto_config_add_string pincode
-       proto_config_add_string delay
+       proto_config_add_int delay
        proto_config_add_string modes
-       proto_config_add_boolean ipv6
-       proto_config_add_boolean dhcp
+       proto_config_add_string pdptype
+       proto_config_add_int profile
+       proto_config_add_boolean dhcpv6
+       proto_config_add_boolean autoconnect
        proto_config_add_defaults
 }
 
 proto_qmi_setup() {
        local interface="$1"
 
-       local device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS
-       local cid_4 pdh_4 cid_6 pdh_6 ipv4
-       local ip subnet gateway dns1 dns2 ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-       json_get_vars device apn auth username password pincode delay modes ipv6 dhcp $PROTO_DEFAULT_OPTIONS
-
-       ipv4=1
-
-       [ "$ipv6" = 1 ] || ipv6=""
+       local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+       local cid_4 pdh_4 cid_6 pdh_6
+       local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
+       json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
 
        [ "$metric" = "" ] && metric="0"
 
@@ -76,18 +74,6 @@ proto_qmi_setup() {
                }
        }
 
-       [ -n "$apn" ] || {
-               echo "No APN specified"
-               proto_notify_error "$interface" NO_APN
-               return 1
-       }
-
-       # try to clear previous autoconnect state
-       # do not reuse previous wds client id to prevent hangs caused by stale data
-       uqmi -s -d "$device" \
-               --stop-network 0xffffffff \
-               --autoconnect > /dev/null
-
        uqmi -s -d "$device" --set-data-format 802.3
        uqmi -s -d "$device" --wda-set-data-format 802.3
 
@@ -98,68 +84,96 @@ proto_qmi_setup() {
 
        [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
 
-       echo "Starting network $apn"
+       echo "Starting network $interface"
 
-       cid_4=`uqmi -s -d "$device" --get-client-id wds`
-       [ $? -ne 0 ] && {
-               echo "Unable to obtain client ID"
-               proto_notify_error "$interface" NO_CID
-               return 1
-       }
+       pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+       [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
+
+       if [ "$pdptype" = "ip" ]; then
+               [ -z "$autoconnect" ] && autoconnect=1
+               [ "$autoconnect" = 0 ] && autoconnect=""
+       else
+               [ "$autoconnect" = 1 ] || autoconnect=""
+       fi
+
+       [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
+               cid_4=`uqmi -s -d "$device" --get-client-id wds`
+               [ $? -ne 0 ] && {
+                       echo "Unable to obtain client ID"
+                       proto_notify_error "$interface" NO_CID
+                       return 1
+               }
 
-       pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
-               --start-network "$apn" \
-               ${auth:+--auth-type $auth} \
-               ${username:+--username $username} \
-               ${password:+--password $password} \
-               --ip-family ipv4 \
-               --autoconnect`
-       [ $? -ne 0 ] && {
-               echo "Unable to connect IPv4"
-               uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
-               ipv4=""
+               uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
+
+               # try to clear previous autoconnect state
+               uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+                       --stop-network 0xffffffff \
+                       --autoconnect > /dev/null
+
+               pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+                       --start-network \
+                       ${apn:+--apn $apn} \
+                       ${profile:+--profile $profile} \
+                       ${auth:+--auth-type $auth} \
+                       ${username:+--username $username} \
+                       ${password:+--password $password} \
+                       ${autoconnect:+--autoconnect}`
+               [ $? -ne 0 ] && {
+                       echo "Unable to connect IPv4"
+                       uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
+                       proto_notify_error "$interface" CALL_FAILED
+                       return 1
+               }
        }
 
-       [ -n "$ipv6" ] && {
+       [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
                cid_6=`uqmi -s -d "$device" --get-client-id wds`
-               if [ $? = 0 ]; then
-                       pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
-                               --start-network "$apn" \
-                               ${auth:+--auth-type $auth} \
-                               ${username:+--username $username} \
-                               ${password:+--password $password} \
-                               --ip-family ipv6 --autoconnect`
-                       [ $? -ne 0 ] && {
-                               echo "Unable to connect IPv6"
-                               uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
-                               ipv6=""
-                       }
-               else
-                       echo "Unable to connect IPv6"
-                       ipv6=""
-               fi
-       }
+               [ $? -ne 0 ] && {
+                       echo "Unable to obtain client ID"
+                       proto_notify_error "$interface" NO_CID
+                       return 1
+               }
 
-       [ -z "$ipv4" -a -z "$ipv6" ] && {
-               echo "Unable to connect"
-               proto_notify_error "$interface" CALL_FAILED
-               return 1
+               uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
+
+               # try to clear previous autoconnect state
+               uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+                       --stop-network 0xffffffff \
+                       --autoconnect > /dev/null
+
+               pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+                       --start-network \
+                       ${apn:+--apn $apn} \
+                       ${profile:+--profile $profile} \
+                       ${auth:+--auth-type $auth} \
+                       ${username:+--username $username} \
+                       ${password:+--password $password} \
+                       ${autoconnect:+--autoconnect}`
+               [ $? -ne 0 ] && {
+                       echo "Unable to connect IPv6"
+                       uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
+                       proto_notify_error "$interface" CALL_FAILED
+                       return 1
+               }
        }
 
        echo "Setting up $ifname"
        proto_init_update "$ifname" 1
+       proto_set_keep 1
        proto_add_data
-       [ -n "$ipv4" ] && {
+       [ -n "$pdh_4" ] && {
                json_add_string "cid_4" "$cid_4"
                json_add_string "pdh_4" "$pdh_4"
        }
-       [ -n "$ipv6" ] && {
+       [ -n "$pdh_6" ] && {
                json_add_string "cid_6" "$cid_6"
                json_add_string "pdh_6" "$pdh_6"
        }
-
-       [ -n "$ipv6" ] && {
-               if [ -z "$dhcp" -o "$dhcp" = 0 ]; then
+       proto_close_data
+       proto_send_update "$interface"
+       [ -n "$pdh_6" ] && {
+               if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
                        json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
                        json_select ipv6
                        json_get_var ip_6 ip
@@ -168,7 +182,8 @@ proto_qmi_setup() {
                        json_get_var dns2_6 dns2
                        json_get_var ip_prefix_length ip-prefix-length
 
-                       # RFC 7278: Extend an IPv6 /64 Prefix to LAN
+                       proto_init_update "$ifname" 1
+                       proto_set_keep 1
                        proto_add_ipv6_address "$ip_6" "128"
                        proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
                        proto_add_ipv6_route "$gateway_6" "128"
@@ -177,9 +192,7 @@ proto_qmi_setup() {
                                proto_add_dns_server "$dns1_6"
                                proto_add_dns_server "$dns2_6"
                        }
-                       proto_add_data
-                       json_add_string "cid_6" "$cid_6"
-                       json_add_string "pdh_6" "$pdh_6"
+                       proto_send_update "$interface"
                else
                        json_init
                        json_add_string name "${interface}_6"
@@ -193,10 +206,7 @@ proto_qmi_setup() {
                fi
        }
 
-       proto_close_data
-       proto_send_update "$interface"
-
-       [ -n "$ipv4" ] && {
+       [ -n "$pdh_4" ] && {
                json_init
                json_add_string name "${interface}_4"
                json_add_string ifname "@$interface"
@@ -213,8 +223,9 @@ qmi_wds_stop() {
 
        [ -n "$cid" ] || return
 
-       # disable previous autoconnect state using the global handle
-       uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "0xffffffff"
+       uqmi -s -d "$device" --set-client-id wds,"$cid" \
+               --stop-network 0xffffffff \
+               --autoconnect > /dev/null
 
        [ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
        uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
@@ -228,7 +239,7 @@ proto_qmi_teardown() {
 
        [ -n "$ctl_device" ] && device=$ctl_device
 
-       echo "Stopping network"
+       echo "Stopping network $interface"
 
        json_load "$(ubus call network.interface.$interface status)"
        json_select data