+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
- * Copyright (C) 2006 FON Technology, SL.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2007 Othello <bach_ag@hotmail.com>
- */
-
-/*
- * Support for AR531X GPIO -- General Purpose Input/Output Pins
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-#include <asm/addrspace.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/gpio.h>
-#include "ar531x.h"
-/*
- GPIO Interrupt Support
- Make use of request_irq() and the function gpio_to_irq() to trap gpio events
- */
-
-/* Global variables */
-static u32 ar531x_gpio_intr_Mask = 0;
-/*
- AR5312: I don't have any devices with this chip. Assumed to be similar to AR5215
- will someone who has one try the code and remove this message if it works?
- */
-
-#ifdef CONFIG_ATHEROS_AR5315
-/*
- AR5315: Up to 2 GPIO pins may be monitored simultaneously
- specifying more pins if you already have 2 will not have any effect
- however, the excess gpio irqs will also be triggered if a valid gpio being monitored triggers
- only high, low or edge triggered interrupt supported
- */
-static unsigned int ar5315_gpio_set_type_gpio = 0;
-static unsigned int ar5315_gpio_set_type_lvl = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
-#endif
-
-#ifdef CONFIG_ATHEROS_AR5312
-/* Enable the specified AR5312_GPIO_IRQ interrupt */
-static void ar5312_gpio_intr_enable(unsigned int irq) {
- u32 reg;
- unsigned int gpio;
- unsigned int imr;
-
- gpio = irq - (AR531X_GPIO_IRQ(0));
- if (gpio >= AR531X_NUM_GPIO)
- return;
- ar531x_gpio_intr_Mask |= (1<<gpio);
-
- reg = sysRegRead(AR531X_GPIO_CR);
- reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio));
- reg |= AR531X_GPIO_CR_I(gpio);
- reg |= AR531X_GPIO_CR_INT(gpio);
-
- sysRegWrite(AR531X_GPIO_CR, reg);
- (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-
- imr = sysRegRead(AR531X_IMR);
- imr |= AR531X_ISR_GPIO;
- sysRegWrite(AR531X_IMR, imr);
- imr = sysRegRead(AR531X_IMR); /* flush write buffer */
-}
-
-/* Disable the specified AR5312_GPIO_IRQ interrupt */
-static void ar5312_gpio_intr_disable(unsigned int irq) {
- u32 reg;
- unsigned int gpio;
- gpio = irq - (AR531X_GPIO_IRQ(0));
- if (gpio >= AR531X_NUM_GPIO)
- return;
-
- reg = sysRegRead(AR531X_GPIO_CR);
- reg &= ~(AR531X_GPIO_CR_M(gpio) | AR531X_GPIO_CR_UART(gpio) | AR531X_GPIO_CR_INT(gpio));
- reg |= AR531X_GPIO_CR_I(gpio);
- /* No GPIO_CR_INT bit */
-
- sysRegWrite(AR531X_GPIO_CR, reg);
- (void)sysRegRead(AR531X_GPIO_CR); /* flush to hardware */
-
- /* Disable Interrupt if no gpio needs triggering */
- if (ar531x_gpio_intr_Mask != 0) {
- unsigned int imr;
-
- imr = sysRegRead(AR531X_IMR);
- imr &= ~AR531X_ISR_GPIO;
- sysRegWrite(AR531X_IMR, imr);
- imr = sysRegRead(AR531X_IMR); /* flush write buffer */
- }
-
- ar531x_gpio_intr_Mask &= ~(1<<gpio);
-}
-
-/* Turn on the specified AR5312_GPIO_IRQ interrupt */
-static unsigned int ar5312_gpio_intr_startup(unsigned int irq) {
- ar5312_gpio_intr_enable(irq);
- return 0;
-}
-
-static void ar5312_gpio_intr_end(unsigned int irq) {
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- ar5312_gpio_intr_enable(irq);
-}
-
-asmlinkage void ar5312_gpio_irq_dispatch(void) {
- int i;
- u32 gpioIntPending;
- gpioIntPending = sysRegRead(AR531X_GPIO_DI) & ar531x_gpio_intr_Mask;
- sysRegWrite(AR531X_ISR, sysRegRead(AR531X_IMR) | ~AR531X_ISR_GPIO);
- for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
- if (gpioIntPending & (1 << i))
- do_IRQ(AR531X_GPIO_IRQ(i));
- }
-}
-#endif /* #ifdef CONFIG_ATHEROS_AR5312 */
-
-#ifdef CONFIG_ATHEROS_AR5315
-/* Enable the specified AR5315_GPIO_IRQ interrupt */
-static void ar5315_gpio_intr_enable(unsigned int irq) {
- u32 reg;
- unsigned int gpio;
- unsigned int imr;
- unsigned int i;
-
- gpio = irq - (AR531X_GPIO_IRQ(0));
- if (gpio >= AR5315_NUM_GPIO)
- return;
- ar531x_gpio_intr_Mask |= (1<<gpio);
-
- reg = sysRegRead(AR5315_GPIO_CR);
- reg &= ~(AR5315_GPIO_CR_M(gpio));
- reg |= AR5315_GPIO_CR_I(gpio);
- sysRegWrite(AR5315_GPIO_CR, reg);
- (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */
-
- /* Locate a free register slot to enable gpio intr
- will fail silently if no more slots are available
- */
- reg = sysRegRead(AR5315_GPIO_INT);
- for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) {
- /* Free slot means trigger level = 0 */
- if ( AR5315_GPIO_INT_LVL_OFF ==
- (reg & AR5315_GPIO_INT_LVL_M) ) {
-
- unsigned int def_lvl = AR5315_GPIO_INT_LVL_EDGE;
- if (ar5315_gpio_set_type_gpio == gpio)
- def_lvl = ar5315_gpio_set_type_lvl;
-
- /* Set the gpio level trigger mode */
-/* reg &= ~(AR5315_GPIO_INT_LVL_M(i)); */
- reg |= AR5315_GPIO_INT_LVL(def_lvl);
-
- /* Enable the gpio pin */
- reg &= ~(AR5315_GPIO_INT_M);
- reg |= AR5315_GPIO_INT_S(i);
-
- sysRegWrite(AR5315_GPIO_INT, reg);
- (void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */
-
- /* break out of for loop */
- break;
- } /* end if trigger level for slot i is 0 */
- } /* end for each slot */
-
- imr = sysRegRead(AR5315_IMR);
- imr |= AR5315_ISR_GPIO;
- sysRegWrite(AR5315_IMR, imr);
- imr = sysRegRead(AR5315_IMR); /* flush write buffer */
-}
-
-
-/* Disable the specified AR5315_GPIO_IRQ interrupt */
-static void ar5315_gpio_intr_disable(unsigned int irq) {
- u32 reg;
- unsigned int gpio;
- unsigned int i;
-
- gpio = irq - (AR531X_GPIO_IRQ(0));
- if (gpio >= AR5315_NUM_GPIO)
- return;
-
- reg = sysRegRead(AR5315_GPIO_CR);
- reg &= ~(AR5315_GPIO_CR_M(gpio));
- reg |= AR5315_GPIO_CR_I(gpio);
- sysRegWrite(AR5315_GPIO_CR, reg);
- (void)sysRegRead(AR5315_GPIO_CR); /* flush write to hardware */
-
- /* Locate a the correct register slot to disable gpio intr */
- reg = sysRegRead(AR5315_GPIO_INT);
- for (i=0 ; i<=AR5315_GPIO_INT_MAX_Y ; i++) {
- /* If this correct */
- if ( AR5315_GPIO_INT_S(i) ==
- (reg & AR5315_GPIO_INT_M) ) {
- /* Clear the gpio level trigger mode */
- reg &= ~(AR5315_GPIO_INT_LVL_M);
-
- sysRegWrite(AR5315_GPIO_INT, reg);
- (void)sysRegRead(AR5315_GPIO_INT); /* flush write to hardware */
- break;
- } /* end if trigger level for slot i is 0 */
- } /* end for each slot */
-
- /* Disable interrupt only if no gpio needs triggering */
- if (ar531x_gpio_intr_Mask != 0) {
- unsigned int imr;
-
- imr = sysRegRead(AR5315_IMR);
- imr &= ~AR5315_ISR_GPIO;
- sysRegWrite(AR5315_IMR, imr);
- imr = sysRegRead(AR5315_IMR); /* flush write buffer */
- }
-
- ar531x_gpio_intr_Mask &= ~(1<<gpio);
-}
-
-/* Turn on the specified AR5315_GPIO_IRQ interrupt */
-static unsigned int ar5315_gpio_intr_startup(unsigned int irq) {
- ar5315_gpio_intr_enable(irq);
- return 0;
-}
-
-static void ar5315_gpio_intr_end(unsigned int irq) {
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- ar5315_gpio_intr_enable(irq);
-}
-
-static int ar5315_gpio_intr_set_type(unsigned int irq, unsigned int flow_type) {
- ar5315_gpio_set_type_gpio = irq - (AR531X_GPIO_IRQ(0));
- if (ar5315_gpio_set_type_gpio > AR5315_NUM_GPIO)
- return -EINVAL;
- switch (flow_type & IRQF_TRIGGER_MASK) {
- case IRQF_TRIGGER_RISING:
- case IRQF_TRIGGER_FALLING:
- printk(KERN_WARNING "AR5315 GPIO %u falling back to edge triggered\n", ar5315_gpio_set_type_gpio);
- case IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING:
- ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_EDGE;
- break;
- case IRQF_TRIGGER_LOW:
- ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_LOW;
- break;
- case IRQF_TRIGGER_HIGH:
- ar5315_gpio_set_type_lvl = AR5315_GPIO_INT_LVL_HIGH;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-asmlinkage void ar5315_gpio_irq_dispatch(void){
- int i;
- u32 gpioIntPending;
- gpioIntPending = sysRegRead(AR5315_GPIO_DI) & ar531x_gpio_intr_Mask;
- sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO);
- for (i=0; i<AR531X_GPIO_IRQ_COUNT; i++) {
- if (gpioIntPending & (1 << i))
- do_IRQ(AR531X_GPIO_IRQ(i));
- }
-}
-#endif /* #ifdef CONFIG_ATHEROS_AR5315 */
-
-/* Common Code */
-static struct irq_chip ar531x_gpio_intr_controller = {
- .typename = "AR531X GPIO",
-};
-
-/* ARGSUSED */
-irqreturn_t
-spurious_gpio_handler(int cpl, void *dev_id)
-{
- u32 gpioDataIn;
- DO_AR5312(gpioDataIn = sysRegRead(AR531X_GPIO_DI);)
- DO_AR5315(gpioDataIn = sysRegRead(AR5315_GPIO_DI);)
-
- printk("spurious_gpio_handler: 0x%08x dev=%p DI=0x%08x gpioIntMask=0x%08x\n",
- cpl, dev_id, gpioDataIn, ar531x_gpio_intr_Mask);
-
- return IRQ_NONE;
-}
-
-static struct irqaction spurious_gpio = {
- .handler = spurious_gpio_handler,
- .name = "spurious_gpio",
-};
-
-/* Initialize AR531X GPIO interrupts */
-static int __init ar531x_gpio_init(void)
-{
- int i;
-
- DO_AR5312( \
- ar531x_gpio_intr_controller.startup = ar5312_gpio_intr_startup; \
- ar531x_gpio_intr_controller.shutdown = ar5312_gpio_intr_disable; \
- ar531x_gpio_intr_controller.enable = ar5312_gpio_intr_enable; \
- ar531x_gpio_intr_controller.disable = ar5312_gpio_intr_disable; \
- ar531x_gpio_intr_controller.ack = ar5312_gpio_intr_disable; \
- ar531x_gpio_intr_controller.end = ar5312_gpio_intr_end; \
- )
-
- DO_AR5315( \
- ar531x_gpio_intr_controller.startup = ar5315_gpio_intr_startup; \
- ar531x_gpio_intr_controller.shutdown = ar5315_gpio_intr_disable; \
- ar531x_gpio_intr_controller.enable = ar5315_gpio_intr_enable; \
- ar531x_gpio_intr_controller.disable = ar5315_gpio_intr_disable; \
- ar531x_gpio_intr_controller.ack = ar5315_gpio_intr_disable; \
- ar531x_gpio_intr_controller.end = ar5315_gpio_intr_end; \
- ar531x_gpio_intr_controller.set_type = ar5315_gpio_intr_set_type; \
- )
-
- for (i = AR531X_GPIO_IRQ_BASE;
- i < AR531X_GPIO_IRQ_BASE + AR531X_GPIO_IRQ_COUNT;
- i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &ar531x_gpio_intr_controller;
- }
-
- setup_irq(AR531X_GPIO_IRQ_NONE, &spurious_gpio);
-
- return 0;
-}
-
-subsys_initcall(ar531x_gpio_init);
-
projects / openwrt / svn-archive / openwrt.git / commitdiff