ramips: Sparklan wcr-150gn board fixes

 * Fix partition sizes.
 * Add buttons and leds.
 * Register usb.
 * Remove unnecessary stuff from image Makefile
 * Fix rt2x00 eeprom extract.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29380

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index d8b35ae30e9fb67f27d943e4bc78770f044048cc..920c8a33a2126f0b349ac13b4759c3fb2fc7b97a 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -55,7 +55,7 @@ case "$FIRMWARE" in
        nw718 | \
        rt-n15 | \
        v22rw-2x2 | \
-       wcr150gn | \
+       wcr-150gn | \
        whr-g300n | \
        wr512-3gn)
                rt2x00_eeprom_extract "factory" 0 272

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
index 984bab7b851e68d79c069ad02b5be4fa6b8f357b..0da27359b1c2c53a3a2afed67712b0cbc5f9a871 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wcr150gn.c
@@ -22,6 +22,44 @@
 
 #include "devices.h"
 
+#define WCR150GN_GPIO_LED_USER                 12
+#define WCR150GN_GPIO_LED_POWER                        8
+#define WCR150GN_GPIO_BUTTON_WPS               10
+#define WCR150GN_GPIO_BUTTON_RESET             0
+#define WCR150GN_BUTTONS_POLL_INTERVAL         20
+
+static struct gpio_led wcr150gn_leds_gpio[] __initdata = {
+       {
+               .name       = "wcr150gn:amber:user",
+               .gpio       = WCR150GN_GPIO_LED_USER,
+               .active_low = 1,
+       },
+       {
+               .name       = "wcr150gn:amber:power",
+               .gpio       = WCR150GN_GPIO_LED_POWER,
+               .active_low = 1,
+       }
+};
+
+static struct gpio_button wcr150gn_gpio_buttons[] __initdata = {
+       {
+               .desc       = "wps",
+               .type       = EV_KEY,
+               .code       = KEY_WPS_BUTTON,
+               .threshold  = 3,
+               .gpio       = WCR150GN_GPIO_BUTTON_WPS,
+               .active_low = 1,
+       },
+       {
+               .desc       = "reset",
+               .type       = EV_KEY,
+               .code       = KEY_RESTART,
+               .threshold  = 10,
+               .gpio       = WCR150GN_GPIO_BUTTON_RESET,
+               .active_low = 1,
+       }
+};
+
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition wcr150gn_partitions[] = {
        {
@@ -33,18 +71,24 @@ static struct mtd_partition wcr150gn_partitions[] = {
                .name   = "config",
                .offset = 0x030000,
                .size   = 0x040000,
+               .mask_flags = MTD_WRITEABLE,
        }, {
                .name   = "factory",
                .offset = 0x040000,
                .size   = 0x050000,
+               .mask_flags = MTD_WRITEABLE,
        }, {
                .name   = "kernel",
                .offset = 0x050000,
-               .size   = 0x120000,
+               .size   = 0x0d0000,
        }, {
                .name   = "rootfs",
                .offset = 0x120000,
-               .size   = 0x400000,
+               .size   = 0x2e0000,
+       }, {
+               .name   = "firmware",
+               .offset = 0x050000,
+               .size   = 0x3b0000,
        }
 };
 #endif /* CONFIG_MTD_PARTITIONS */
@@ -60,10 +104,16 @@ static void __init wcr150gn_init(void)
 {
        rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
        rt305x_register_flash(0, &wcr150gn_flash_data);
+       ramips_register_gpio_leds(-1, ARRAY_SIZE(wcr150gn_leds_gpio),
+                                 wcr150gn_leds_gpio);
+       ramips_register_gpio_buttons(-1, WCR150GN_BUTTONS_POLL_INTERVAL,
+                                    ARRAY_SIZE(wcr150gn_gpio_buttons),
+                                    wcr150gn_gpio_buttons);
        rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
        rt305x_register_ethernet();
        rt305x_register_wifi();
        rt305x_register_wdt();
+       rt305x_register_usb();
 }
 
 MIPS_MACHINE(RAMIPS_MACH_WCR150GN, "WCR150GN", "Sparklan WCR-150GN",

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 7d32155dc79ec274ab8dfd1486a4772cdc9cbf66..7f0ef00e463234113f6bb4f68dfe324bb257ab8b 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -202,15 +202,8 @@ define Image/Build/Profile/MOFI35003GN
        $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN)
 endef
 
-mtdlayout_wcr150gn=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
-mtd_wcr150gn_kernel_part_size=851968
-mtd_wcr150gn_rootfs_part_size=3014656
-define Image/Build/Template/WCR150GN
-       $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_wcr150gn,$(mtd_wcr150gn_kernel_part_size),$(mtd_wcr150gn_rootfs_part_size))
-endef
-
 define Image/Build/Profile/WCR150GN
-       $(call Image/Build/Template/WCR150GN,$(1),wcr150gn,WCR150GN)
+       $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN)
 endef