dm: dts: Move omap device tree includes to correct place

These ended up in arch/arm/dts/dt-bindings temporarily, but in fact the
correct place is now include/dt-bindings. Move them to be consistent.

Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/arch/arm/dts/dt-bindings/gpio/gpio.h b/arch/arm/dts/dt-bindings/gpio/gpio.h
deleted file mode 100644 (file)
index e6b1e0a..0000000
--- a/arch/arm/dts/dt-bindings/gpio/gpio.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * This header provides constants for most GPIO bindings.
- *
- * Most GPIO bindings include a flags cell as part of the GPIO specifier.
- * In most cases, the format of the flags cell uses the standard values
- * defined in this header.
- */
-
-#ifndef _DT_BINDINGS_GPIO_GPIO_H
-#define _DT_BINDINGS_GPIO_GPIO_H
-
-#define GPIO_ACTIVE_HIGH 0
-#define GPIO_ACTIVE_LOW 1
-
-#endif

diff --git a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h
deleted file mode 100644 (file)
index 2fbc804..0000000
--- a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This header provides constants specific to AM33XX pinctrl bindings.
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
-#define _DT_BINDINGS_PINCTRL_AM33XX_H
-
-#include <dt-bindings/pinctrl/omap.h>
-
-/* am33xx specific mux bit defines */
-#undef PULL_ENA
-#undef INPUT_EN
-
-#define PULL_DISABLE           (1 << 3)
-#define INPUT_EN               (1 << 5)
-#define SLEWCTRL_FAST          (1 << 6)
-
-/* update macro depending on INPUT_EN and PULL_ENA */
-#undef PIN_OUTPUT
-#undef PIN_OUTPUT_PULLUP
-#undef PIN_OUTPUT_PULLDOWN
-#undef PIN_INPUT
-#undef PIN_INPUT_PULLUP
-#undef PIN_INPUT_PULLDOWN
-
-#define PIN_OUTPUT             (PULL_DISABLE)
-#define PIN_OUTPUT_PULLUP      (PULL_UP)
-#define PIN_OUTPUT_PULLDOWN    0
-#define PIN_INPUT              (INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP       (INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN     (INPUT_EN)
-
-/* undef non-existing modes */
-#undef PIN_OFF_NONE
-#undef PIN_OFF_OUTPUT_HIGH
-#undef PIN_OFF_OUTPUT_LOW
-#undef PIN_OFF_INPUT_PULLUP
-#undef PIN_OFF_INPUT_PULLDOWN
-#undef PIN_OFF_WAKEUPENABLE
-
-#endif
-

diff --git a/arch/arm/dts/dt-bindings/pinctrl/omap.h b/arch/arm/dts/dt-bindings/pinctrl/omap.h
deleted file mode 100644 (file)
index edbd250..0000000
--- a/arch/arm/dts/dt-bindings/pinctrl/omap.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * This header provides constants for OMAP pinctrl bindings.
- *
- * Copyright (C) 2009 Nokia
- * Copyright (C) 2009-2010 Texas Instruments
- */
-
-#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
-#define _DT_BINDINGS_PINCTRL_OMAP_H
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define MUX_MODE0      0
-#define MUX_MODE1      1
-#define MUX_MODE2      2
-#define MUX_MODE3      3
-#define MUX_MODE4      4
-#define MUX_MODE5      5
-#define MUX_MODE6      6
-#define MUX_MODE7      7
-
-/* 24xx/34xx mux bit defines */
-#define PULL_ENA               (1 << 3)
-#define PULL_UP                        (1 << 4)
-#define ALTELECTRICALSEL       (1 << 5)
-
-/* 34xx specific mux bit defines */
-#define INPUT_EN               (1 << 8)
-#define OFF_EN                 (1 << 9)
-#define OFFOUT_EN              (1 << 10)
-#define OFFOUT_VAL             (1 << 11)
-#define OFF_PULL_EN            (1 << 12)
-#define OFF_PULL_UP            (1 << 13)
-#define WAKEUP_EN              (1 << 14)
-
-/* 44xx specific mux bit defines */
-#define WAKEUP_EVENT           (1 << 15)
-
-/* Active pin states */
-#define PIN_OUTPUT             0
-#define PIN_OUTPUT_PULLUP      (PIN_OUTPUT | PULL_ENA | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN    (PIN_OUTPUT | PULL_ENA)
-#define PIN_INPUT              INPUT_EN
-#define PIN_INPUT_PULLUP       (PULL_ENA | INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN     (PULL_ENA | INPUT_EN)
-
-/* Off mode states */
-#define PIN_OFF_NONE           0
-#define PIN_OFF_OUTPUT_HIGH    (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
-#define PIN_OFF_OUTPUT_LOW     (OFF_EN | OFFOUT_EN)
-#define PIN_OFF_INPUT_PULLUP   (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
-#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
-#define PIN_OFF_WAKEUPENABLE   WAKEUP_EN
-
-#endif
-

diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
new file mode 100644 (file)
index 0000000..2fbc804
--- /dev/null
+++ b/include/dt-bindings/pinctrl/am33xx.h
@@ -0,0 +1,42 @@
+/*
+ * This header provides constants specific to AM33XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H
+#define _DT_BINDINGS_PINCTRL_AM33XX_H
+
+#include <dt-bindings/pinctrl/omap.h>
+
+/* am33xx specific mux bit defines */
+#undef PULL_ENA
+#undef INPUT_EN
+
+#define PULL_DISABLE           (1 << 3)
+#define INPUT_EN               (1 << 5)
+#define SLEWCTRL_FAST          (1 << 6)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT             (PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP      (PULL_UP)
+#define PIN_OUTPUT_PULLDOWN    0
+#define PIN_INPUT              (INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP       (INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN     (INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+

diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
new file mode 100644 (file)
index 0000000..edbd250
--- /dev/null
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -0,0 +1,55 @@
+/*
+ * This header provides constants for OMAP pinctrl bindings.
+ *
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009-2010 Texas Instruments
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_OMAP_H
+#define _DT_BINDINGS_PINCTRL_OMAP_H
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define MUX_MODE0      0
+#define MUX_MODE1      1
+#define MUX_MODE2      2
+#define MUX_MODE3      3
+#define MUX_MODE4      4
+#define MUX_MODE5      5
+#define MUX_MODE6      6
+#define MUX_MODE7      7
+
+/* 24xx/34xx mux bit defines */
+#define PULL_ENA               (1 << 3)
+#define PULL_UP                        (1 << 4)
+#define ALTELECTRICALSEL       (1 << 5)
+
+/* 34xx specific mux bit defines */
+#define INPUT_EN               (1 << 8)
+#define OFF_EN                 (1 << 9)
+#define OFFOUT_EN              (1 << 10)
+#define OFFOUT_VAL             (1 << 11)
+#define OFF_PULL_EN            (1 << 12)
+#define OFF_PULL_UP            (1 << 13)
+#define WAKEUP_EN              (1 << 14)
+
+/* 44xx specific mux bit defines */
+#define WAKEUP_EVENT           (1 << 15)
+
+/* Active pin states */
+#define PIN_OUTPUT             0
+#define PIN_OUTPUT_PULLUP      (PIN_OUTPUT | PULL_ENA | PULL_UP)
+#define PIN_OUTPUT_PULLDOWN    (PIN_OUTPUT | PULL_ENA)
+#define PIN_INPUT              INPUT_EN
+#define PIN_INPUT_PULLUP       (PULL_ENA | INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN     (PULL_ENA | INPUT_EN)
+
+/* Off mode states */
+#define PIN_OFF_NONE           0
+#define PIN_OFF_OUTPUT_HIGH    (OFF_EN | OFFOUT_EN | OFFOUT_VAL)
+#define PIN_OFF_OUTPUT_LOW     (OFF_EN | OFFOUT_EN)
+#define PIN_OFF_INPUT_PULLUP   (OFF_EN | OFF_PULL_EN | OFF_PULL_UP)
+#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN)
+#define PIN_OFF_WAKEUPENABLE   WAKEUP_EN
+
+#endif
+