lantiq: add Buffalo WBMR-300HPD support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds
index 39b693ac19e1cf38bcc718490f54c10aa343efcb..c365468030b9735ff3c26acd0881b1438e8b6723 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -42,6 +42,13 @@ P2812HNUF*)
 ARV7519RW22)
        ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
        ;;
+WBMR300)
+       ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
+       ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
+       ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
+       ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
+       ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
+       ;;
 *)
        ;;
 esac

diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index a3dc80c54b16d31e3950c3881e3d4f202ea205a2..89ffc79b0f68e34ce18694e76203d1d080e98b08 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -146,6 +146,13 @@ VGV7510KW22)
                "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6t@eth0"
        ;;
 
+WBMR300)
+       lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
+       wan_mac="$lan_mac"
+       ucidef_add_switch "switch0" \
+               "2:lan:1" "3:lan:2" "5:lan:3" "4:wan:1" "6t@eth0"
+       ;;
+
 esac
 
 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then

diff --git a/target/linux/lantiq/dts/WBMR300.dts b/target/linux/lantiq/dts/WBMR300.dts
new file mode 100644 (file)
index 0000000..824efb7
--- /dev/null
+++ b/target/linux/lantiq/dts/WBMR300.dts
@@ -0,0 +1,303 @@
+/dts-v1/;
+
+/include/ "vr9.dtsi"
+
+/ {
+       model = "WBMR300 - Buffalo WBMR-300HPD";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+
+               leds {
+                       boot = &power_g;
+                       failsafe = &diag_r;
+                       running = &power_g;
+
+                       dsl = &dsl;
+                       internet = &router_g;
+                       wifi = &wifi_g;
+               };
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       fpi@10000000 {
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               mdio {
+                                       lantiq,groups = "mdio";
+                                       lantiq,function = "mdio";
+                               };
+                               phy-rst {
+                                       lantiq,pins = "io42";
+                                       lantiq,pull = <0>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               pcie-rst {
+                                       lantiq,pins = "io38";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                       };
+                       pins_spi_default: pins_spi_default {
+                               spi_in {
+                                       lantiq,groups = "spi_di";
+                                       lantiq,function = "spi";
+                               };
+                               spi_out {
+                                       lantiq,groups = "spi_do", "spi_clk",
+                                               "spi_cs4";
+                                       lantiq,function = "spi";
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+                       lantiq,portmask = <0x3>;
+               };
+
+               ifxhcd@E106000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+               };
+       };
+
+       gphy-xrx200 {
+               compatible = "lantiq,phy-xrx200";
+               firmware = "lantiq/vr9_phy22f_a2x.bin";
+               phys = [ 00 01 ];
+       };
+
+       gpio_poweroff {
+               compatible = "gpio-poweroff";
+               gpios = <&gpio 6 1>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               power {
+                       label = "power";
+                       gpios = <&gpio 5 1>;
+                       linux,code = <0x74>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 7 1>;
+                       linux,code = <0x198>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 31 1>;
+                       linux,code = <0x211>;
+               };
+
+               auto {
+                       label = "auto";
+                       gpios = <&gpio 48 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+
+               router {
+                       label = "router";
+                       gpios = <&gpio 2 0>;
+                       linux,code = <0x100>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               diag_r: diag_r {
+                       label = "wbmr300:red:diag";
+                       gpios = <&gpio 0 0>;
+                       default_state = "off";
+               };
+
+               wifi_g: wifi_g {
+                       label = "wbmr300:green:wifi";
+                       gpios = <&gpio 1 0>;
+               };
+
+               dsl: dsl {
+                       label = "dsl";
+                       gpios = <&gpio 4 0>;
+               };
+
+               router_y: router_y {
+                       label = "wbmr300:yellow:router";
+                       gpios = <&gpio 8 0>;
+               };
+
+               wifi_y: wifi_y {
+                       label = "wbmr300:yellow:wifi";
+                       gpios = <&gpio 9 0>;
+               };
+
+               lan1: lan1 {
+                       label = "wbmr300:green:lan1";
+                       gpios = <&gpio 11 0>;
+               };
+
+               wan: wan {
+                       label = "wbmr300:green:wan";
+                       gpios = <&gpio 12 0>;
+               };
+
+               lan3: lan3 {
+                       label = "wbmr300:green:lan3";
+                       gpios = <&gpio 15 0>;
+               };
+
+               lan2: lan2 {
+                       label = "wbmr300:green:lan2";
+                       gpios = <&gpio 33 0>;
+               };
+
+               internet_g: internet_g {
+                       label = "wbmr300:green:internet";
+                       gpios = <&gpio 34 0>;
+               };
+
+               internet_y: internet_y {
+                       label = "wbmr300:yellow:internet";
+                       gpios = <&gpio 35 0>;
+               };
+
+               router_g: router_g {
+                       label = "wbmr300:green:router";
+                       gpios = <&gpio 36 0>;
+               };
+
+               power_g: power_g {
+                       label = "wbmr300:green:power";
+                       gpios = <&gpio 49 0>;
+               };
+       };
+};
+
+&spi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pins_spi_default>;
+
+       status = "ok";
+       m25p80@4 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <4 0>;
+               spi-max-frequency = <20000000>;
+
+               partition@0 {
+                       reg = <0x0 0x10000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@10000 {
+                       reg = <0x10000 0x10000>;
+                       label = "gphyfirmware";
+                       read-only;
+               };
+
+               partition@20000 {
+                       reg = <0x20000 0x80000>;
+                       label = "dsl_fw";
+               };
+
+               partition@de0000 {
+                       reg = <0xa0000 0xf40000>;
+                       label = "firmware";
+               };
+
+               partition@fe0000 {
+                       reg = <0xfe0000 0x10000>;
+                       label = "sysconfig";
+                       read-only;
+               };
+
+               partition@ff0000 {
+                       reg = <0xff0000 0x2000>;
+                       label = "ubootconfig";
+               };
+
+               partition@ff3000 {
+                       reg = <0xff3000 0x2000>;
+                       label = "board_config";
+                       read-only;
+               };
+       };
+};
+
+&eth0 {
+       lan: interface@0 {
+               compatible = "lantiq,xrx200-pdi";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0>;
+               lantiq,switch;
+
+               ethernet@1 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <4>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy13>;
+               };
+               ethernet@2 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <5>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy14>;
+               };
+               ethernet@3 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <2>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy11>;
+               };
+               ethernet@4 {
+                       compatible = "lantiq,xrx200-pdi-port";
+                       reg = <3>;
+                       phy-mode = "mii";
+                       phy-handle = <&phy12>;
+               };
+       };
+
+       mdio@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "lantiq,xrx200-mdio";
+               phy11: ethernet-phy@11 {
+                       reg = <0x11>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy12: ethernet-phy@12 {
+                       reg = <0x12>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy13: ethernet-phy@13 {
+                       reg = <0x13>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+               phy14: ethernet-phy@14 {
+                       reg = <0x14>;
+                       compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
+               };
+       };
+};

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index b1a6a80cb99e2d73d673b1ef0d0e3144a890a332..16c0820f112a406358139e5407a3f286e0c6e576 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -647,6 +647,14 @@ Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J)
 
 include tp-link.mk
 
+define Device/WBMR300
+  DEVICE_PROFILE := WBMR300
+  IMAGE_SIZE := 15616k
+  DEVICE_TITLE := Buffalo WBMR-300HPD
+  DEVICE_PACKAGES := kmod-mt76 wpad-mini kmod-usb-dwc2
+endef
+TARGET_DEVICES += WBMR300
+
 define Device/VGV7510KW22NOR
   DEVICE_PROFILE := VGV7510KW22NOR
   IMAGE_SIZE := 15232k

diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default
index c40ecfe8e89b19180ae8020211a90728f8b53957..42e846ede02d3147e6146822ef919dd349ddbb4a 100644 (file)
--- a/target/linux/lantiq/xrx200/config-default
+++ b/target/linux/lantiq/xrx200/config-default
@@ -27,6 +27,9 @@ CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_NLS=y
 CONFIG_PCIE_LANTIQ=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_RTL8306_PHY=y
 CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8367B_PHY=y