compatible = "mti,cpu-interrupt-controller";
};
- mmc_clk: mmc-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- clock-accuracy = <100>;
- };
-
mmc_reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
compatible = "ralink,rt2880-timer";
reg = <0x100 0x20>;
- clocks = <&sysc 5>;
+ clocks = <&sysc 7>;
interrupt-parent = <&intc>;
interrupts = <1>;
compatible = "ralink,rt2880-wdt";
reg = <0x120 0x10>;
- clocks = <&sysc 6>;
+ clocks = <&sysc 8>;
resets = <&sysc 8>;
reset-names = "wdt";
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
- clocks = <&sysc 7>;
+ clocks = <&sysc 9>;
resets = <&sysc 12>;
compatible = "ralink,rt2880-i2c";
reg = <0x900 0x100>;
- clocks = <&sysc 8>;
+ clocks = <&sysc 10>;
resets = <&sysc 16>;
reset-names = "i2c";
compatible = "mediatek,mt7620-i2s";
reg = <0xa00 0x100>;
- clocks = <&sysc 9>;
+ clocks = <&sysc 11>;
resets = <&sysc 17>;
reset-names = "i2s";
compatible = "ralink,rt2880-spi";
reg = <0xb00 0x40>;
- clocks = <&sysc 10>;
+ clocks = <&sysc 12>;
resets = <&sysc 18>;
reset-names = "spi";
compatible = "ralink,rt2880-spi";
reg = <0xb40 0x60>;
- clocks = <&sysc 11>;
+ clocks = <&sysc 13>;
resets = <&sysc 18>;
reset-names = "spi";
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
- clocks = <&sysc 12>;
+ clocks = <&sysc 14>;
resets = <&sysc 19>;
cap-mmc-highspeed;
cap-sd-highspeed;
- clocks = <&mmc_clk>, <&mmc_clk>;
+ clocks = <&sysc 15>, <&sysc 15>;
clock-names = "source", "hclk";
disable-wp;
compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
reg = <0x10180000 0x40000>;
- clocks = <&sysc 13>;
+ clocks = <&sysc 16>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
compatible = "ralink,rt2880-timer";
reg = <0x100 0x20>;
- clocks = <&sysc 5>;
+ clocks = <&sysc 7>;
interrupt-parent = <&intc>;
interrupts = <1>;
compatible = "ralink,rt2880-wdt";
reg = <0x120 0x10>;
- clocks = <&sysc 6>;
+ clocks = <&sysc 8>;
resets = <&sysc 8>;
reset-names = "wdt";
compatible = "ralink,rt2880-i2c";
reg = <0x900 0x100>;
- clocks = <&sysc 8>;
+ clocks = <&sysc 10>;
resets = <&sysc 16>;
reset-names = "i2c";
compatible = "ralink,rt2880-spi";
reg = <0xb00 0x40>;
- clocks = <&sysc 10>;
+ clocks = <&sysc 12>;
resets = <&sysc 18>;
reset-names = "spi";
compatible = "ralink,rt2880-spi";
reg = <0xb40 0x60>;
- clocks = <&sysc 11>;
+ clocks = <&sysc 13>;
resets = <&sysc 18>;
reset-names = "spi";
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
- clocks = <&sysc 12>;
+ clocks = <&sysc 14>;
resets = <&sysc 19>;
compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
reg = <0x10180000 0x40000>;
- clocks = <&sysc 13>;
+ clocks = <&sysc 16>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
compatible = "mti,cpu-interrupt-controller";
};
- mmc_clk: mmc-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <48000000>;
- clock-accuracy = <100>;
- };
-
mmc_reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
compatible = "mediatek,mt7621-i2c";
reg = <0x900 0x100>;
- clocks = <&sysc 7>;
+ clocks = <&sysc 9>;
clock-names = "i2c";
resets = <&sysc 16>;
compatible = "mediatek,mt7628-i2s";
reg = <0xa00 0x100>;
- clocks = <&sysc 8>;
+ clocks = <&sysc 10>;
resets = <&sysc 17>;
reset-names = "i2s";
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x100>;
- clocks = <&sysc 9>;
+ clocks = <&sysc 11>;
clock-names = "spi";
resets = <&sysc 18>;
reg-io-width = <4>;
no-loopback-test;
- clocks = <&sysc 11>;
+ clocks = <&sysc 13>;
resets = <&sysc 12>;
reg-io-width = <4>;
no-loopback-test;
- clocks = <&sysc 12>;
+ clocks = <&sysc 14>;
resets = <&sysc 19>;
reg-io-width = <4>;
no-loopback-test;
- clocks = <&sysc 13>;
+ clocks = <&sysc 15>;
resets = <&sysc 20>;
cap-mmc-highspeed;
cap-sd-highspeed;
- clocks = <&mmc_clk>, <&mmc_clk>;
+ clocks = <&sysc 16>, <&sysc 16>;
clock-names = "source", "hclk";
disable-wp;
compatible = "mediatek,mt7628-wmac";
reg = <0x10300000 0x100000>;
- clocks = <&sysc 14>;
+ clocks = <&sysc 17>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
compatible = "ralink,rt2880-timer";
reg = <0x100 0x20>;
- clocks = <&sysc 4>;
+ clocks = <&sysc 5>;
interrupt-parent = <&intc>;
interrupts = <1>;
compatible = "ralink,rt2880-wdt";
reg = <0x120 0x10>;
- clocks = <&sysc 5>;
+ clocks = <&sysc 6>;
resets = <&sysc 8>;
reset-names = "wdt";
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0x500 0x100>;
- clocks = <&sysc 6>;
+ clocks = <&sysc 7>;
resets = <&sysc 12>;
compatible = "ralink,rt2880-i2c";
reg = <0x900 0x100>;
- clocks = <&sysc 7>;
+ clocks = <&sysc 8>;
resets = <&sysc 16>;
reset-names = "i2c";
compatible = "ralink,rt3883-i2s";
reg = <0xa00 0x100>;
- clocks = <&sysc 8>;
+ clocks = <&sysc 9>;
resets = <&sysc 17>;
reset-names = "i2s";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&sysc 9>;
+ clocks = <&sysc 10>;
resets = <&sysc 18>;
reset-names = "spi";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&sysc 10>;
+ clocks = <&sysc 11>;
resets = <&sysc 18>;
reset-names = "spi";
compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
- clocks = <&sysc 11>;
+ clocks = <&sysc 12>;
resets = <&sysc 19>;
#size-cells = <0>;
reg = <0x10100000 0x10000>;
- clocks = <&sysc 12>;
+ clocks = <&sysc 13>;
resets = <&sysc 21>;
reset-names = "fe";
compatible = "ralink,rt3883-wmac", "ralink,rt2880-wmac";
reg = <0x10180000 0x40000>;
- clocks = <&sysc 13>;
+ clocks = <&sysc 14>;
interrupt-parent = <&cpuintc>;
interrupts = <6>;
--- /dev/null
+From 33239152305567b3e9bf052f71fd4baecd626341 Mon Sep 17 00:00:00 2001
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Tue, 10 Sep 2024 06:40:22 +0200
+Subject: [PATCH 1/3] clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883
+
+Clock plan for Ralink SoC RT3883 needs an extra 'periph' clock to properly
+set some peripherals that has this clock as their parent. When this driver
+was mainlined we could not find any active users of this SoC so we cannot
+perform any real tests for it. Now, one user of a Belkin f9k1109 version 1
+device which uses this SoC appear and reported some issues in openWRT:
+- https://github.com/openwrt/openwrt/issues/16054
+The peripherals that are wrong are 'uart', 'i2c', 'i2s' and 'uartlite' which
+has a not defined 'periph' clock as parent. Hence, introduce it to have a
+properly working clock plan for this SoC.
+
+Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Link: https://lore.kernel.org/r/20240910044024.120009-2-sergio.paracuellos@gmail.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/ralink/clk-mtmips.c | 9 +++++++--
+ 1 file changed, 7 insertions(+), 2 deletions(-)
+
+--- a/drivers/clk/ralink/clk-mtmips.c
++++ b/drivers/clk/ralink/clk-mtmips.c
+@@ -267,6 +267,11 @@ static struct mtmips_clk_fixed rt305x_fi
+ CLK_FIXED("xtal", NULL, 40000000)
+ };
+
++static struct mtmips_clk_fixed rt3883_fixed_clocks[] = {
++ CLK_FIXED("xtal", NULL, 40000000),
++ CLK_FIXED("periph", "xtal", 40000000)
++};
++
+ static struct mtmips_clk_fixed rt3352_fixed_clocks[] = {
+ CLK_FIXED("periph", "xtal", 40000000)
+ };
+@@ -779,8 +784,8 @@ static const struct mtmips_clk_data rt33
+ static const struct mtmips_clk_data rt3883_clk_data = {
+ .clk_base = rt3883_clks_base,
+ .num_clk_base = ARRAY_SIZE(rt3883_clks_base),
+- .clk_fixed = rt305x_fixed_clocks,
+- .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
++ .clk_fixed = rt3883_fixed_clocks,
++ .num_clk_fixed = ARRAY_SIZE(rt3883_fixed_clocks),
+ .clk_factor = NULL,
+ .num_clk_factor = 0,
+ .clk_periph = rt5350_pherip_clks,
--- /dev/null
+From d34db686a3d74bd564bfce2ada15011c556269fc Mon Sep 17 00:00:00 2001
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Tue, 10 Sep 2024 06:40:23 +0200
+Subject: [PATCH 2/3] clk: ralink: mtmips: fix clocks probe order in oldest
+ ralink SoCs
+
+Base clocks are the first in being probed and are real dependencies of the
+rest of fixed, factor and peripheral clocks. For old ralink SoCs RT2880,
+RT305x and RT3883 'xtal' must be defined first since in any other case,
+when fixed clocks are probed they are delayed until 'xtal' is probed so the
+following warning appears:
+
+ WARNING: CPU: 0 PID: 0 at drivers/clk/ralink/clk-mtmips.c:499 rt3883_bus_recalc_rate+0x98/0x138
+ Modules linked in:
+ CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.43 #0
+ Stack : 805e58d0 00000000 00000004 8004f950 00000000 00000004 00000000 00000000
+ 80669c54 80830000 80700000 805ae570 80670068 00000001 80669bf8 00000000
+ 00000000 00000000 805ae570 80669b38 00000020 804db7dc 00000000 00000000
+ 203a6d6d 80669b78 80669e48 70617773 00000000 805ae570 00000000 00000009
+ 00000000 00000001 00000004 00000001 00000000 00000000 83fe43b0 00000000
+ ...
+ Call Trace:
+ [<800065d0>] show_stack+0x64/0xf4
+ [<804bca14>] dump_stack_lvl+0x38/0x60
+ [<800218ac>] __warn+0x94/0xe4
+ [<8002195c>] warn_slowpath_fmt+0x60/0x94
+ [<80259ff8>] rt3883_bus_recalc_rate+0x98/0x138
+ [<80254530>] __clk_register+0x568/0x688
+ [<80254838>] of_clk_hw_register+0x18/0x2c
+ [<8070b910>] rt2880_clk_of_clk_init_driver+0x18c/0x594
+ [<8070b628>] of_clk_init+0x1c0/0x23c
+ [<806fc448>] plat_time_init+0x58/0x18c
+ [<806fdaf0>] time_init+0x10/0x6c
+ [<806f9bc4>] start_kernel+0x458/0x67c
+
+ ---[ end trace 0000000000000000 ]---
+
+When this driver was mainlined we could not find any active users of old
+ralink SoCs so we cannot perform any real tests for them. Now, one user
+of a Belkin f9k1109 version 1 device which uses RT3883 SoC appeared and
+reported some issues in openWRT:
+- https://github.com/openwrt/openwrt/issues/16054
+
+Thus, define a 'rt2880_xtal_recalc_rate()' just returning the expected
+frequency 40Mhz and use it along the old ralink SoCs to have a correct
+boot trace with no warnings and a working clock plan from the beggining.
+
+Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Link: https://lore.kernel.org/r/20240910044024.120009-3-sergio.paracuellos@gmail.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/ralink/clk-mtmips.c | 21 +++++++++++++--------
+ 1 file changed, 13 insertions(+), 8 deletions(-)
+
+--- a/drivers/clk/ralink/clk-mtmips.c
++++ b/drivers/clk/ralink/clk-mtmips.c
+@@ -263,10 +263,6 @@ err_clk_unreg:
+ .rate = _rate \
+ }
+
+-static struct mtmips_clk_fixed rt305x_fixed_clocks[] = {
+- CLK_FIXED("xtal", NULL, 40000000)
+-};
+-
+ static struct mtmips_clk_fixed rt3883_fixed_clocks[] = {
+ CLK_FIXED("xtal", NULL, 40000000),
+ CLK_FIXED("periph", "xtal", 40000000)
+@@ -371,6 +367,12 @@ static inline struct mtmips_clk *to_mtmi
+ return container_of(hw, struct mtmips_clk, hw);
+ }
+
++static unsigned long rt2880_xtal_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ return 40000000;
++}
++
+ static unsigned long rt5350_xtal_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+ {
+@@ -682,10 +684,12 @@ static unsigned long mt76x8_cpu_recalc_r
+ }
+
+ static struct mtmips_clk rt2880_clks_base[] = {
++ { CLK_BASE("xtal", NULL, rt2880_xtal_recalc_rate) },
+ { CLK_BASE("cpu", "xtal", rt2880_cpu_recalc_rate) }
+ };
+
+ static struct mtmips_clk rt305x_clks_base[] = {
++ { CLK_BASE("xtal", NULL, rt2880_xtal_recalc_rate) },
+ { CLK_BASE("cpu", "xtal", rt305x_cpu_recalc_rate) }
+ };
+
+@@ -695,6 +699,7 @@ static struct mtmips_clk rt3352_clks_bas
+ };
+
+ static struct mtmips_clk rt3883_clks_base[] = {
++ { CLK_BASE("xtal", NULL, rt2880_xtal_recalc_rate) },
+ { CLK_BASE("cpu", "xtal", rt3883_cpu_recalc_rate) },
+ { CLK_BASE("bus", "cpu", rt3883_bus_recalc_rate) }
+ };
+@@ -751,8 +756,8 @@ err_clk_unreg:
+ static const struct mtmips_clk_data rt2880_clk_data = {
+ .clk_base = rt2880_clks_base,
+ .num_clk_base = ARRAY_SIZE(rt2880_clks_base),
+- .clk_fixed = rt305x_fixed_clocks,
+- .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
++ .clk_fixed = NULL,
++ .num_clk_fixed = 0,
+ .clk_factor = rt2880_factor_clocks,
+ .num_clk_factor = ARRAY_SIZE(rt2880_factor_clocks),
+ .clk_periph = rt2880_pherip_clks,
+@@ -762,8 +767,8 @@ static const struct mtmips_clk_data rt28
+ static const struct mtmips_clk_data rt305x_clk_data = {
+ .clk_base = rt305x_clks_base,
+ .num_clk_base = ARRAY_SIZE(rt305x_clks_base),
+- .clk_fixed = rt305x_fixed_clocks,
+- .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
++ .clk_fixed = NULL,
++ .num_clk_fixed = 0,
+ .clk_factor = rt305x_factor_clocks,
+ .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks),
+ .clk_periph = rt305x_pherip_clks,
--- /dev/null
+From 198675bbc03d437fb80a35d781ad13d622d0ff68 Mon Sep 17 00:00:00 2001
+From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Date: Tue, 10 Sep 2024 06:40:24 +0200
+Subject: [PATCH 3/3] clk: ralink: mtmips: add mmc related clocks for SoCs
+ MT7620, MT7628 and MT7688
+
+Original architecture clock code from where this driver was derived did not
+include nothing related to mmc clocks. OpenWRT people started to use mtk-sd
+upstream driver recently and they were forced to use a dts 'fixed-clock'
+node with 48 MHz clock:
+- https://github.com/openwrt/openwrt/pull/15896
+The proper thing to do to avoid that is to add the mmc related clocks to the
+driver to avoid a dts with fixed clocks nodes. The minimal documentation in
+the mt7620 programming guide says that there is a BBP_PLL clock of 480 MHz
+derived from the 40 MHz XTAL and from there a clock divider by ten produces
+the desired SDHC clock of 48 MHz for the mmc. Hence add a fixed clock 'bbppll'
+and factor clock 'sdhc' ten divider child to properly set the 'mmc' peripheral
+clock with the desired 48 Mhz rate.
+
+Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
+Link: https://lore.kernel.org/r/20240910044024.120009-4-sergio.paracuellos@gmail.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/ralink/clk-mtmips.c | 30 +++++++++++++++++++++++-------
+ 1 file changed, 23 insertions(+), 7 deletions(-)
+
+--- a/drivers/clk/ralink/clk-mtmips.c
++++ b/drivers/clk/ralink/clk-mtmips.c
+@@ -207,6 +207,7 @@ static struct mtmips_clk mt7620_pherip_c
+ { CLK_PERIPH("10000b00.spi", "bus") },
+ { CLK_PERIPH("10000b40.spi", "bus") },
+ { CLK_PERIPH("10000c00.uartlite", "periph") },
++ { CLK_PERIPH("10130000.mmc", "sdhc") },
+ { CLK_PERIPH("10180000.wmac", "xtal") }
+ };
+
+@@ -220,6 +221,7 @@ static struct mtmips_clk mt76x8_pherip_c
+ { CLK_PERIPH("10000c00.uart0", "periph") },
+ { CLK_PERIPH("10000d00.uart1", "periph") },
+ { CLK_PERIPH("10000e00.uart2", "periph") },
++ { CLK_PERIPH("10130000.mmc", "sdhc") },
+ { CLK_PERIPH("10300000.wmac", "xtal") }
+ };
+
+@@ -272,8 +274,13 @@ static struct mtmips_clk_fixed rt3352_fi
+ CLK_FIXED("periph", "xtal", 40000000)
+ };
+
++static struct mtmips_clk_fixed mt7620_fixed_clocks[] = {
++ CLK_FIXED("bbppll", "xtal", 480000000)
++};
++
+ static struct mtmips_clk_fixed mt76x8_fixed_clocks[] = {
+- CLK_FIXED("pcmi2s", "xtal", 480000000),
++ CLK_FIXED("bbppll", "xtal", 480000000),
++ CLK_FIXED("pcmi2s", "bbppll", 480000000),
+ CLK_FIXED("periph", "xtal", 40000000)
+ };
+
+@@ -328,6 +335,15 @@ static struct mtmips_clk_factor rt305x_f
+ CLK_FACTOR("bus", "cpu", 1, 3)
+ };
+
++static struct mtmips_clk_factor mt7620_factor_clocks[] = {
++ CLK_FACTOR("sdhc", "bbppll", 1, 10)
++};
++
++static struct mtmips_clk_factor mt76x8_factor_clocks[] = {
++ CLK_FACTOR("bus", "cpu", 1, 3),
++ CLK_FACTOR("sdhc", "bbppll", 1, 10)
++};
++
+ static int mtmips_register_factor_clocks(struct clk_hw_onecell_data *clk_data,
+ struct mtmips_clk_priv *priv)
+ {
+@@ -811,10 +827,10 @@ static const struct mtmips_clk_data rt53
+ static const struct mtmips_clk_data mt7620_clk_data = {
+ .clk_base = mt7620_clks_base,
+ .num_clk_base = ARRAY_SIZE(mt7620_clks_base),
+- .clk_fixed = NULL,
+- .num_clk_fixed = 0,
+- .clk_factor = NULL,
+- .num_clk_factor = 0,
++ .clk_fixed = mt7620_fixed_clocks,
++ .num_clk_fixed = ARRAY_SIZE(mt7620_fixed_clocks),
++ .clk_factor = mt7620_factor_clocks,
++ .num_clk_factor = ARRAY_SIZE(mt7620_factor_clocks),
+ .clk_periph = mt7620_pherip_clks,
+ .num_clk_periph = ARRAY_SIZE(mt7620_pherip_clks),
+ };
+@@ -824,8 +840,8 @@ static const struct mtmips_clk_data mt76
+ .num_clk_base = ARRAY_SIZE(mt76x8_clks_base),
+ .clk_fixed = mt76x8_fixed_clocks,
+ .num_clk_fixed = ARRAY_SIZE(mt76x8_fixed_clocks),
+- .clk_factor = rt305x_factor_clocks,
+- .num_clk_factor = ARRAY_SIZE(rt305x_factor_clocks),
++ .clk_factor = mt76x8_factor_clocks,
++ .num_clk_factor = ARRAY_SIZE(mt76x8_factor_clocks),
+ .clk_periph = mt76x8_pherip_clks,
+ .num_clk_periph = ARRAY_SIZE(mt76x8_pherip_clks),
+ };
+++ /dev/null
-Subject: [PATCH] clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883
-Date: Tue, 6 Aug 2024 16:29:02 +0200
-Message-Id: <20240806142902.224164-1-sergio.paracuellos@gmail.com>
-
-Clock plan for Ralink SoC RT3883 needs an extra 'periph' clock to properly
-set some peripherals that has this clock as their parent. When this driver
-was mainlined we could not find any active users of this SoC so we cannot
-perform any real tests for it. Now, one user of a Belkin f9k1109 version 1
-device which uses this SoC appear and reported some issues in openWRT:
-- https://github.com/openwrt/openwrt/issues/16054
-The peripherals that are wrong are 'uart', 'i2c', 'i2s' and 'uartlite' which
-has a not defined 'periph' clock as parent. Hence, introduce it to have a
-properly working clock plan for this SoC.
-
-Fixes: 6f3b15586eef ("clk: ralink: add clock and reset driver for MTMIPS SoCs")
-Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
----
- drivers/clk/ralink/clk-mtmips.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/ralink/clk-mtmips.c
-+++ b/drivers/clk/ralink/clk-mtmips.c
-@@ -267,6 +267,11 @@ static struct mtmips_clk_fixed rt305x_fi
- CLK_FIXED("xtal", NULL, 40000000)
- };
-
-+static struct mtmips_clk_fixed rt3383_fixed_clocks[] = {
-+ CLK_FIXED("xtal", NULL, 40000000),
-+ CLK_FIXED("periph", "xtal", 40000000)
-+};
-+
- static struct mtmips_clk_fixed rt3352_fixed_clocks[] = {
- CLK_FIXED("periph", "xtal", 40000000)
- };
-@@ -779,8 +784,8 @@ static const struct mtmips_clk_data rt33
- static const struct mtmips_clk_data rt3883_clk_data = {
- .clk_base = rt3883_clks_base,
- .num_clk_base = ARRAY_SIZE(rt3883_clks_base),
-- .clk_fixed = rt305x_fixed_clocks,
-- .num_clk_fixed = ARRAY_SIZE(rt305x_fixed_clocks),
-+ .clk_fixed = rt3383_fixed_clocks,
-+ .num_clk_fixed = ARRAY_SIZE(rt3383_fixed_clocks),
- .clk_factor = NULL,
- .num_clk_factor = 0,
- .clk_periph = rt5350_pherip_clks,
projects / openwrt / openwrt.git / commitdiff