LINUX_VERSION-3.18 = .20
LINUX_VERSION-4.0 = .9
-LINUX_VERSION-4.1 = .5
+LINUX_VERSION-4.1 = .6
LINUX_KERNEL_MD5SUM-3.18.20 = 952c9159acdf4efbc96e08a27109d994
LINUX_KERNEL_MD5SUM-4.0.9 = 40fc5f6e2d718e539b45e6601c71985b
-LINUX_KERNEL_MD5SUM-4.1.5 = f23e1d4ce8f63e46db81d56e36281885
+LINUX_KERNEL_MD5SUM-4.1.6 = 1dae0c808e34164cab3dfd57be88bd53
ifdef KERNEL_PATCHVER
LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
-@@ -236,6 +236,8 @@ void __init plat_time_init(void)
+@@ -237,6 +237,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_clk_rate / 2;
}
-Index: linux-4.1.4/arch/mips/ath79/Kconfig
-===================================================================
---- linux-4.1.4.orig/arch/mips/ath79/Kconfig 2015-08-10 16:28:12.409834069 +0100
-+++ linux-4.1.4/arch/mips/ath79/Kconfig 2015-08-10 16:30:16.341831945 +0100
-@@ -904,6 +904,16 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -904,6 +904,16 @@ config ATH79_MACH_EAP7660D
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
-Index: linux-4.1.4/arch/mips/ath79/Makefile
-===================================================================
---- linux-4.1.4.orig/arch/mips/ath79/Makefile 2015-08-10 16:28:12.409834069 +0100
-+++ linux-4.1.4/arch/mips/ath79/Makefile 2015-08-10 16:30:39.985831540 +0100
-@@ -56,6 +56,7 @@
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_ATH79_MACH_AP96) += mach-a
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-Index: linux-4.1.4/arch/mips/ath79/machtypes.h
-===================================================================
---- linux-4.1.4.orig/arch/mips/ath79/machtypes.h 2015-08-10 16:28:12.409834069 +0100
-+++ linux-4.1.4/arch/mips/ath79/machtypes.h 2015-08-10 16:31:13.693830962 +0100
-@@ -39,6 +39,7 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -39,6 +39,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -1043,6 +1043,17 @@
+@@ -1053,6 +1053,17 @@ config ATH79_MACH_TL_WDR4300
select ATH79_DEV_USB
select ATH79_DEV_WMAC
select SOC_AR933X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -153,6 +153,7 @@
+@@ -154,6 +154,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -129,6 +129,7 @@
+@@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
#endif /* _ASM_R4KCACHE_H */
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
-@@ -333,6 +333,10 @@
+@@ -358,6 +358,10 @@
.macro RESTORE_SP_AND_RET
LONG_L sp, PT_R29(sp)
.set arch=r4000
+++ /dev/null
-From 1b02e59087d3de3953d3fa0536356e3e137bf74b Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 28 Jul 2015 19:24:24 -0700
-Subject: [PATCH] Revert "MIPS: BCM63xx: Provide a plat_post_dma_flush hook"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit 3cf29543413207d3ab1c3f62a88c09bb46f2264e ("MIPS:
-BCM63xx: Provide a plat_post_dma_flush hook") since this commit was
-found to prevent BCM6358 (early BMIPS4350 cores) and some BCM6368
-(BMIPS4380 cores) from booting reliably.
-
-Alvaro was able to track this down to an issue specifically located to
-devices that use the second thread (TP1) when booting. Since BCM63xx did
-not have a need for plat_post_dma_flush() hook before, let's just keep
-things the way they were.
-
-CC: stable@vger.kernel.org
-CC: Kevin Cernekee <cernekee@gmail.com>
-CC: Nicolas Schichan <nschichan@freebox.fr>
-Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Reported-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/dma-coherence.h | 10 ----------
- 1 file changed, 10 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-bcm63xx/dma-coherence.h
-
---- a/arch/mips/include/asm/mach-bcm63xx/dma-coherence.h
-+++ /dev/null
-@@ -1,10 +0,0 @@
--#ifndef __ASM_MACH_BCM63XX_DMA_COHERENCE_H
--#define __ASM_MACH_BCM63XX_DMA_COHERENCE_H
--
--#include <asm/bmips.h>
--
--#define plat_post_dma_flush bmips_post_dma_flush
--
--#include <asm/mach-generic/dma-coherence.h>
--
--#endif /* __ASM_MACH_BCM63XX_DMA_COHERENCE_H */
+++ /dev/null
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sun, 19 Jul 2015 00:21:57 +0200
-Subject: [PATCH] MIPS: kernel: fix sched_getaffinity with MT FPAFF enabled
-
-p->thread.user_cpus_allowed is zero-initialized and is only filled on
-the first sched_setaffinity call.
-
-To avoid adding overhead in the task initialization codepath, simply OR
-the returned mask in sched_getaffinity with p->cpus_allowed.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/arch/mips/kernel/mips-mt-fpaff.c
-+++ b/arch/mips/kernel/mips-mt-fpaff.c
-@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi
- unsigned long __user *user_mask_ptr)
- {
- unsigned int real_len;
-- cpumask_t mask;
-+ cpumask_t allowed, mask;
- int retval;
- struct task_struct *p;
-
-@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi
- if (retval)
- goto out_unlock;
-
-- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask);
-+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed);
-+ cpumask_and(&mask, &allowed, cpu_active_mask);
-
- out_unlock:
- read_unlock(&tasklist_lock);
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
-@@ -186,6 +186,7 @@ int get_c0_perfcount_int(void)
+@@ -181,6 +181,7 @@ const char *get_system_type(void)
{
- return ATH79_MISC_IRQ(5);
+ return ath79_sys_type;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- unsigned int get_c0_compare_int(void)
+ int get_c0_perfcount_int(void)
{
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
-@@ -466,6 +466,7 @@ int get_c0_perfcount_int(void)
- {
- return ltq_perfcount_irq;
+@@ -461,6 +461,7 @@ int __init icu_of_init(struct device_nod
+
+ return 0;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- unsigned int get_c0_compare_int(void)
+ int get_c0_perfcount_int(void)
{
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
-@@ -148,6 +148,7 @@ int get_c0_perfcount_int(void)
+@@ -163,6 +163,7 @@ unsigned int get_c0_compare_int(void)
- return mips_cpu_perf_irq;
+ return mips_cpu_timer_irq;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- unsigned int get_c0_compare_int(void)
+ static void __init init_rtc(void)
{
--- a/arch/mips/mti-sead3/sead3-time.c
+++ b/arch/mips/mti-sead3/sead3-time.c
-@@ -77,6 +77,7 @@ int get_c0_perfcount_int(void)
- return MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
- return -1;
+@@ -85,6 +85,7 @@ unsigned int get_c0_compare_int(void)
+ return gic_get_c0_compare_int();
+ return MIPS_CPU_IRQ_BASE + cp0_compare_irq;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- unsigned int get_c0_compare_int(void)
+ void __init plat_time_init(void)
{
--- a/arch/mips/pistachio/time.c
+++ b/arch/mips/pistachio/time.c
-@@ -26,6 +26,7 @@ int get_c0_perfcount_int(void)
+@@ -21,6 +21,7 @@ unsigned int get_c0_compare_int(void)
{
- return gic_get_c0_perfcount_int();
+ return gic_get_c0_compare_int();
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- void __init plat_time_init(void)
+ int get_c0_perfcount_int(void)
{
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
-@@ -89,6 +89,7 @@ int get_c0_perfcount_int(void)
+@@ -95,6 +95,7 @@ unsigned int get_c0_compare_int(void)
{
- return rt_perfcount_irq;
+ return CP0_LEGACY_COMPARE_IRQ;
}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
- unsigned int get_c0_compare_int(void)
+ static void ralink_intc_irq_handler(unsigned int irq, struct irq_desc *desc)
{
enum mtd_parser_type type,
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -658,7 +658,7 @@ static int mtd_add_partition_attrs(struc
+@@ -659,7 +659,7 @@ static int mtd_add_partition_attrs(struc
}
__mtd_add_partition(struct mtd_info *master, const char *name,
long long offset, long long length, bool dup_check)
{
-@@ -762,7 +762,7 @@ run_parsers_by_type(struct mtd_part *sla
+@@ -763,7 +763,7 @@ run_parsers_by_type(struct mtd_part *sla
return nr_parts;
}
mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len)
{
unsigned long mask = mtd->erasesize - 1;
-@@ -832,7 +832,6 @@ static void split_uimage(struct mtd_info
+@@ -833,7 +833,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
/* initialize internal qc */
/* XXX: Tag 0 is used for drivers with legacy EH as some
-@@ -4781,6 +4789,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -4796,6 +4804,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
/* libsas case */
if (ap->flags & ATA_FLAG_SAS_HOST) {
tag = ata_sas_allocate_tag(ap);
-@@ -4826,6 +4837,8 @@ void ata_qc_free(struct ata_queued_cmd *
+@@ -4841,6 +4852,8 @@ void ata_qc_free(struct ata_queued_cmd *
qc->tag = ATA_TAG_POISON;
if (ap->flags & ATA_FLAG_SAS_HOST)
ata_sas_free_tag(tag, ap);
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
-@@ -902,6 +902,8 @@ struct ata_port_operations {
+@@ -905,6 +905,8 @@ struct ata_port_operations {
void (*qc_prep)(struct ata_queued_cmd *qc);
unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
/*
* Configuration and exception handling
-@@ -992,6 +994,9 @@ struct ata_port_operations {
+@@ -995,6 +997,9 @@ struct ata_port_operations {
void (*phy_reset)(struct ata_port *ap);
void (*eng_timeout)(struct ata_port *ap);
+++ /dev/null
-From f8ff99a839ed05e1e4993b543357183b095b77f1 Mon Sep 17 00:00:00 2001
-From: Michal Suchanek <hramrach@gmail.com>
-Date: Thu, 1 Jan 2015 16:44:45 +0100
-Subject: [PATCH] mtd: nand: Fix NAND_* options to use unique values.
-
-NAND_BUSWIDTH_AUTO (64b37b2a6) and NAND_USE_BOUNCE_BUFFER (66507c7bc)
-are the same value. Change the later introduced NAND_USE_BOUNCE_BUFFER
-to a different value.
-
-Signed-off-by: Michal Suchanek <hramrach@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- include/linux/mtd/nand.h | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -176,17 +176,17 @@ typedef enum {
- /* Chip may not exist, so silence any errors in scan */
- #define NAND_SCAN_SILENT_NODEV 0x00040000
- /*
-- * This option could be defined by controller drivers to protect against
-- * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
-- */
--#define NAND_USE_BOUNCE_BUFFER 0x00080000
--/*
- * Autodetect nand buswidth with readid/onfi.
- * This suppose the driver will configure the hardware in 8 bits mode
- * when calling nand_scan_ident, and update its configuration
- * before calling nand_scan_tail.
- */
--#define NAND_BUSWIDTH_AUTO 0x00080000
-+#define NAND_BUSWIDTH_AUTO 0x00080000
-+/*
-+ * This option could be defined by controller drivers to protect against
-+ * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
-+ */
-+#define NAND_USE_BOUNCE_BUFFER 0x00100000
-
- /* Options set by nand scan */
- /* Nand scan has allocated controller struct */
projects / openwrt / staging / chunkeey.git / commitdiff