qualcommax: dl-wrx36: fix 2.5G port LED-s

Currently, 2.5G port LED-s on Dynalink are incorrectly configured and thus
they will light up all of the time.

So, lets fix this by:
1. Current green LED is actually yellow, change the color
2. Fix its polarity as its actually active-low
3. The yellow LED that was registered as being connected to LED_1 pin on
the PHY is not actually connected at all, so remove it.
4. The actual green LED is connected to LED_2 on the PHY so add it.

Fixes: 75ad5c24142a ("qualcommax: switch to qca8081 upstream PHY driver")
Fixes: #14502
Link: https://github.com/openwrt/openwrt/pull/17656
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
index c5c089c00f7dd41e2508588b7837224f9e075599..d25bc90153c433d57c3b90b754f3a350cc26d802 100644 (file)
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-dl-wrx36.dts
@@ -178,14 +178,15 @@
 
                        led@0 {
                                reg = <0>;
-                               color = <LED_COLOR_ID_GREEN>;
+                               color = <LED_COLOR_ID_YELLOW>;
                                function = LED_FUNCTION_WAN;
                                default-state = "keep";
+                               active-low;
                        };
 
-                       led@1 {
-                               reg = <1>;
-                               color = <LED_COLOR_ID_YELLOW>;
+                       led@2 {
+                               reg = <2>;
+                               color = <LED_COLOR_ID_GREEN>;
                                function = LED_FUNCTION_WAN;
                                default-state = "keep";
                        };