cap4200ag)
status_led="senao:green:pwr"
;;
+ cf-e316n-v2)
+ status_led="$(ar71xx_board_name):blue:wan"
+ ;;
cpe510)
status_led="tp-link:green:link4"
;;
ucidef_set_led_wlan "wlan" "WLAN" "carambola2:green:wlan" "phy0tpt"
;;
+cf-e316n-v2)
+ ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
+ ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
+ ;;
+
cpe510)
ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
*CAP4200AG)
name="cap4200ag"
;;
+ *"COMFAST CF-E316N v2")
+ name="cf-e316n-v2"
+ ;;
*"CPE210/220/510/520")
name="cpe510"
tplink_pharos_board_detect
ap81 | \
ap83 | \
ap132 | \
+ cf-e316n-v2 | \
dgl-5500-a1 |\
dhp-1565-a1 |\
dir-505-a1 | \
CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_CAP4200AG=y
CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E316N_V2=y
CONFIG_ATH79_MACH_CPE510=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_DGL_5500_A1=y
--- /dev/null
+/*
+ * COMFAST CF-E316N v2
+ * by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+ *
+ * aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+ *
+ * Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/timer.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
+ {
+ .name = "cf-e316n-v2:blue:diag",
+ .gpio = 0,
+ .active_low = 0,
+ }, {
+ .name = "cf-e316n-v2:red:diag",
+ .gpio = 2,
+ .active_low = 0,
+ }, {
+ .name = "cf-e316n-v2:green:diag",
+ .gpio = 3,
+ .active_low = 0,
+ }, {
+ .name = "cf-e316n-v2:blue:wlan",
+ .gpio = 12,
+ .active_low = 1,
+ }, {
+ .name = "cf-e316n-v2:blue:wan",
+ .gpio = 17,
+ .active_low = 1,
+ }, {
+ .name = "cf-e316n-v2:blue:lan",
+ .gpio = 19,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = 60,
+ .gpio = 20,
+ .active_low = 1,
+ },
+};
+
+/* There's a Pericon Technology PT7A7514 connected to GPIO 16 */
+#define EXT_WATCHDOG_GPIO 16
+static struct timer_list gpio_wdt_timer;
+
+static void gpio_wdt_toggle(unsigned long period)
+{
+ static int state;
+ state = !state;
+ gpio_set_value(EXT_WATCHDOG_GPIO, state);
+ mod_timer(&gpio_wdt_timer, jiffies + period);
+}
+
+static void __init cf_e316n_v2_setup(void)
+{
+ u8 *maclan = (u8 *) KSEG1ADDR(0x1f010000);
+ u8 *macwlan = (u8 *) KSEG1ADDR(0x1f011002);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f011000);
+ u8 tmpmac[ETH_ALEN];
+
+ gpio_request(EXT_WATCHDOG_GPIO, "PT7A7514 watchdog");
+ gpio_direction_output(EXT_WATCHDOG_GPIO, 0);
+ setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, msecs_to_jiffies(500));
+ gpio_wdt_toggle(msecs_to_jiffies(1));
+
+ ath79_register_m25p80(NULL);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
+ ath79_register_mdio(1, 0x0);
+
+ /* GMAC0 is connected to the PHY0 of the internal switch */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_init_mac(ath79_eth0_data.mac_addr, maclan, 0);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the internal switch */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, maclan, 2);
+ ath79_register_eth(1);
+
+ /* Enable 2x Skyworks SE2576L WLAN power amplifiers */
+ gpio_request(13, "RF Amp 1");
+ gpio_direction_output(13, 1);
+ gpio_request(14, "RF Amp 2");
+ gpio_direction_output(14, 1);
+ ath79_init_mac(tmpmac, macwlan, 0);
+ ath79_register_wmac(ee, tmpmac);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
+ cf_e316n_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, 20,
+ ARRAY_SIZE(cf_e316n_v2_gpio_keys),
+ cf_e316n_v2_gpio_keys);
+
+ /* J1 is a High-Speed USB port, pin 1 is Vcc */
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
+ cf_e316n_v2_setup);
--- /dev/null
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/CF-E316N-V2
+ NAME:=COMFAST CF-E316N v2
+ PACKAGES:=
+endef
+
+define Profile/CF-E316N-V2/Description
+ Package set optimised for the COMFAST CF-E316N v2
+ by Shenzhen Four Seas Global Link Network Technology Co., Ltd
+ aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0 (no FCC ID)
+endef
+
+$(eval $(call Profile,CF-E316N-V2))
endef
TARGET_DEVICES += carambola2
+define Device/cf-e316n-v2
+ BOARDNAME = CF-E316N-V2
+ IMAGE_SIZE = 16192k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
+endef
+TARGET_DEVICES += cf-e316n-v2
+
define Device/wndr3700
BOARDNAME = WNDR3700
NETGEAR_KERNEL_MAGIC = 0x33373030
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
-@@ -237,6 +237,8 @@ void __init plat_time_init(void)
+@@ -236,6 +236,8 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_clk_rate / 2;
}
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,24 +16,207 @@
+@@ -16,24 +16,208 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
+ ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
+ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
++ ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
+ ATH79_MACH_CPE510, /* TP-LINK CPE510 */
ATH79_MACH_DB120, /* Atheros DB120 reference board */
ATH79_MACH_PB44, /* Atheros PB44 reference board */
config ATH79_MACH_UBNT_XM
bool "Ubiquiti Networks XM/UniFi boards"
-@@ -83,6 +1212,97 @@ config ATH79_MACH_UBNT_XM
+@@ -83,6 +1212,107 @@ config ATH79_MACH_UBNT_XM
Say 'Y' here if you want your kernel to support the
Ubiquiti Networks XM (rev 1.0) board.
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_CF_E316N_V2
++ bool "COMFAST CF-E316N v2 board"
++ select SOC_AR934X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+config ATH79_MACH_BHU_BXU2000N2_A
+ bool "BHU BXU2000n-2 rev. A support"
+ select SOC_AR934X
endmenu
config SOC_AR71XX
-@@ -134,7 +1354,10 @@ config ATH79_DEV_DSA
+@@ -134,7 +1364,10 @@ config ATH79_DEV_DSA
config ATH79_DEV_ETH
def_bool n
def_bool n
config ATH79_DEV_GPIO_BUTTONS
-@@ -164,6 +1387,11 @@ config ATH79_PCI_ATH9K_FIXUP
+@@ -164,6 +1397,11 @@ config ATH79_PCI_ATH9K_FIXUP
def_bool n
config ATH79_ROUTERBOOT
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -38,9 +38,133 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
+@@ -38,9 +38,134 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += route
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
++obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
+obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
+obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
- obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -39,6 +39,7 @@ enum ath79_mach_type {
+ ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
- ATH79_MACH_CPE510, /* TP-LINK CPE510 */
+ ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
select SOC_AR933X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -154,6 +154,7 @@ enum ath79_mach_type {
+@@ -155,6 +155,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -130,6 +130,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m
+@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
projects / openwrt / staging / chunkeey.git / commitdiff