Literally.
I expect "lose" was meant here, rather than "loose", though you could feasibly
use a somewhat uncommon definition of "loose" to mean what would be meant by
"lose": "Loose the hounds" for instance, as in "Release the hounds".
Substituting in "value" for "hounds" gives "release the value", and makes some
sense, but futher substituting back to loose gives "loose the value" which
overall just seems a bit anachronistic.
Instead, use modern, pragmatic English and save a character.
Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
*flags |= GPIO_OPEN_SOURCE;
}
- if (of_flags & OF_GPIO_SLEEP_MAY_LOOSE_VALUE)
- *flags |= GPIO_SLEEP_MAY_LOOSE_VALUE;
+ if (of_flags & OF_GPIO_SLEEP_MAY_LOSE_VALUE)
+ *flags |= GPIO_SLEEP_MAY_LOSE_VALUE;
return desc;
}
if (offset >= chip->ngpio)
return false;
- return !test_bit(FLAG_SLEEP_MAY_LOOSE_VALUE,
+ return !test_bit(FLAG_SLEEP_MAY_LOSE_VALUE,
&chip->gpiodev->descs[offset].flags);
}
EXPORT_SYMBOL_GPL(gpiochip_line_is_persistent);
set_bit(FLAG_OPEN_DRAIN, &desc->flags);
if (lflags & GPIO_OPEN_SOURCE)
set_bit(FLAG_OPEN_SOURCE, &desc->flags);
- if (lflags & GPIO_SLEEP_MAY_LOOSE_VALUE)
- set_bit(FLAG_SLEEP_MAY_LOOSE_VALUE, &desc->flags);
+ if (lflags & GPIO_SLEEP_MAY_LOSE_VALUE)
+ set_bit(FLAG_SLEEP_MAY_LOSE_VALUE, &desc->flags);
/* No particular flag request, return here... */
if (!(dflags & GPIOD_FLAGS_BIT_DIR_SET)) {
#define FLAG_OPEN_SOURCE 8 /* Gpio is open source type */
#define FLAG_USED_AS_IRQ 9 /* GPIO is connected to an IRQ */
#define FLAG_IS_HOGGED 11 /* GPIO is hogged */
-#define FLAG_SLEEP_MAY_LOOSE_VALUE 12 /* GPIO may loose value in sleep */
+#define FLAG_SLEEP_MAY_LOSE_VALUE 12 /* GPIO may lose value in sleep */
/* Connection label */
const char *label;
/* Bit 3 express GPIO suspend/resume persistence */
#define GPIO_SLEEP_MAINTAIN_VALUE 0
-#define GPIO_SLEEP_MAY_LOOSE_VALUE 8
+#define GPIO_SLEEP_MAY_LOSE_VALUE 8
#endif
GPIO_OPEN_DRAIN = (1 << 1),
GPIO_OPEN_SOURCE = (1 << 2),
GPIO_SLEEP_MAINTAIN_VALUE = (0 << 3),
- GPIO_SLEEP_MAY_LOOSE_VALUE = (1 << 3),
+ GPIO_SLEEP_MAY_LOSE_VALUE = (1 << 3),
};
/**
OF_GPIO_ACTIVE_LOW = 0x1,
OF_GPIO_SINGLE_ENDED = 0x2,
OF_GPIO_OPEN_DRAIN = 0x4,
- OF_GPIO_SLEEP_MAY_LOOSE_VALUE = 0x8,
+ OF_GPIO_SLEEP_MAY_LOSE_VALUE = 0x8,
};
#ifdef CONFIG_OF_GPIO