PKG_NAME:=mac80211
-PKG_VERSION:=4.19-rc5-1
+PKG_VERSION:=4.19.7-1
PKG_RELEASE:=1
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v4.19-rc5/
-PKG_HASH:=5b61e64ea79d22bbac9e8612d5d5485974f223de00d4ec250b0faf4b7baf9957
+PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v4.19.7/
+PKG_HASH:=86650a02f36b0d39059be343d4bad3be14adece699723713a69c94cc64d456ef
PKG_SOURCE:=backports-$(PKG_VERSION).tar.xz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)
void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature);
--- a/local-symbols
+++ b/local-symbols
-@@ -140,6 +140,7 @@ ATH10K_SNOC=
+@@ -139,6 +139,7 @@ ATH10K_SNOC=
ATH10K_DEBUG=
ATH10K_DEBUGFS=
ATH10K_SPECTRAL=
---help---
--- a/local-symbols
+++ b/local-symbols
-@@ -84,6 +84,7 @@ ADM8211=
+@@ -83,6 +83,7 @@ ADM8211=
ATH_COMMON=
WLAN_VENDOR_ATH=
ATH_DEBUG=
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
-@@ -2980,6 +2980,8 @@ void regulatory_hint_country_ie(struct w
+@@ -2982,6 +2982,8 @@ void regulatory_hint_country_ie(struct w
enum environment_cap env = ENVIRON_ANY;
struct regulatory_request *request = NULL, *lr;
/* IE len must be evenly divisible by 2 */
if (country_ie_len & 0x01)
return;
-@@ -3186,6 +3188,7 @@ static void restore_regulatory_settings(
+@@ -3188,6 +3190,7 @@ static void restore_regulatory_settings(
void regulatory_hint_disconnect(void)
{
#endif /* _LINUX_ATH9K_PLATFORM_H */
--- a/local-symbols
+++ b/local-symbols
-@@ -111,6 +111,7 @@ ATH9K_WOW=
+@@ -110,6 +110,7 @@ ATH9K_WOW=
ATH9K_RFKILL=
ATH9K_CHANNEL_CONTEXT=
ATH9K_PCOEM=
}
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7346,12 +7346,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
+@@ -7357,12 +7357,7 @@ ath10k_wmi_peer_assoc_fill_10_4(struct a
struct wmi_10_4_peer_assoc_complete_cmd *cmd = buf;
ath10k_wmi_peer_assoc_fill_10_2(ar, buf, arg);
ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
--- a/local-symbols
+++ b/local-symbols
-@@ -142,6 +142,7 @@ ATH10K_SNOC=
+@@ -141,6 +141,7 @@ ATH10K_SNOC=
ATH10K_DEBUG=
ATH10K_DEBUGFS=
ATH10K_SPECTRAL=
static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
-@@ -7166,6 +7166,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
+@@ -7177,6 +7177,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
return skb;
}
static struct sk_buff *
ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
enum wmi_sta_ps_mode psmode)
-@@ -8777,6 +8820,9 @@ static const struct wmi_ops wmi_ops = {
+@@ -8788,6 +8831,9 @@ static const struct wmi_ops wmi_ops = {
.fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_op_gen_echo,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -8847,6 +8893,8 @@ static const struct wmi_ops wmi_10_1_ops
+@@ -8858,6 +8904,8 @@ static const struct wmi_ops wmi_10_1_ops
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
.gen_echo = ath10k_wmi_op_gen_echo,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -8918,6 +8966,8 @@ static const struct wmi_ops wmi_10_2_ops
+@@ -8929,6 +8977,8 @@ static const struct wmi_ops wmi_10_2_ops
.gen_delba_send = ath10k_wmi_op_gen_delba_send,
.fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
.get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
/* .gen_pdev_enable_adaptive_cca not implemented */
};
-@@ -8988,6 +9038,8 @@ static const struct wmi_ops wmi_10_2_4_o
+@@ -8999,6 +9049,8 @@ static const struct wmi_ops wmi_10_2_4_o
.gen_pdev_enable_adaptive_cca =
ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
.get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
/* .gen_bcn_tmpl not implemented */
/* .gen_prb_tmpl not implemented */
/* .gen_p2p_go_bcn_ie not implemented */
-@@ -9067,6 +9119,8 @@ static const struct wmi_ops wmi_10_4_ops
+@@ -9078,6 +9130,8 @@ static const struct wmi_ops wmi_10_4_ops
.gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
.gen_echo = ath10k_wmi_op_gen_echo,
.gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
+++ /dev/null
-From: Arend van Spriel <arend.vanspriel@broadcom.com>
-Date: Wed, 5 Sep 2018 09:48:58 +0200
-Subject: [PATCH] brcmfmac: fix for proper support of 160MHz bandwidth
-
-Decoding of firmware channel information was not complete for 160MHz
-support. This resulted in the following warning:
-
- WARNING: CPU: 2 PID: 2222 at .../broadcom/brcm80211/brcmutil/d11.c:196
- brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
- Modules linked in: brcmfmac(O) brcmutil(O) sha256_generic cfg80211 ...
- CPU: 2 PID: 2222 Comm: kworker/2:0 Tainted: G O
- 4.17.0-wt-testing-x64-00002-gf1bed50 #1
- Hardware name: Dell Inc. Latitude E6410/07XJP9, BIOS A07 02/15/2011
- Workqueue: events request_firmware_work_func
- RIP: 0010:brcmu_d11ac_decchspec+0x2e/0x100 [brcmutil]
- RSP: 0018:ffffc90000047bd0 EFLAGS: 00010206
- RAX: 000000000000e832 RBX: ffff8801146fe910 RCX: ffff8801146fd3c0
- RDX: 0000000000002800 RSI: 0000000000000070 RDI: ffffc90000047c30
- RBP: ffffc90000047bd0 R08: 0000000000000000 R09: ffffffffa0798c80
- R10: ffff88012bca55e0 R11: ffff880110a4ea00 R12: ffff8801146f8000
- R13: ffffc90000047c30 R14: ffff8801146fe930 R15: ffff8801138e02e0
- FS: 0000000000000000(0000) GS:ffff88012bc80000(0000) knlGS:0000000000000000
- CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
- CR2: 00007f18ce8b8070 CR3: 000000000200a003 CR4: 00000000000206e0
- Call Trace:
- brcmf_setup_wiphybands+0x212/0x780 [brcmfmac]
- brcmf_cfg80211_attach+0xae2/0x11a0 [brcmfmac]
- brcmf_attach+0x1fc/0x4b0 [brcmfmac]
- ? __kmalloc+0x13c/0x1c0
- brcmf_pcie_setup+0x99b/0xe00 [brcmfmac]
- brcmf_fw_request_done+0x16a/0x1f0 [brcmfmac]
- request_firmware_work_func+0x36/0x60
- process_one_work+0x146/0x350
- worker_thread+0x4a/0x3b0
- kthread+0x102/0x140
- ? process_one_work+0x350/0x350
- ? kthread_bind+0x20/0x20
- ret_from_fork+0x35/0x40
- Code: 66 90 0f b7 07 55 48 89 e5 89 c2 88 47 02 88 47 03 66 81 e2 00 38
- 66 81 fa 00 18 74 6e 66 81 fa 00 20 74 39 66 81 fa 00 10 74 14 <0f>
- 0b 66 25 00 c0 74 20 66 3d 00 c0 75 20 c6 47 04 01 5d c3 66
- ---[ end trace 550c46682415b26d ]---
- brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 50
-
-This patch adds the missing stuff to properly handle this.
-
-Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
-Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
-Reviewed-by: Franky Lin <franky.lin@broadcom.com>
-Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
----
- .../net/wireless/broadcom/brcm80211/brcmutil/d11.c | 34 +++++++++++++++++++++-
- .../broadcom/brcm80211/include/brcmu_wifi.h | 2 ++
- 2 files changed, 35 insertions(+), 1 deletion(-)
-
---- a/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
-+++ b/drivers/net/wireless/broadcom/brcm80211/brcmutil/d11.c
-@@ -77,6 +77,8 @@ static u16 d11ac_bw(enum brcmu_chan_bw b
- return BRCMU_CHSPEC_D11AC_BW_40;
- case BRCMU_CHAN_BW_80:
- return BRCMU_CHSPEC_D11AC_BW_80;
-+ case BRCMU_CHAN_BW_160:
-+ return BRCMU_CHSPEC_D11AC_BW_160;
- default:
- WARN_ON(1);
- }
-@@ -190,8 +192,38 @@ static void brcmu_d11ac_decchspec(struct
- break;
- }
- break;
-- case BRCMU_CHSPEC_D11AC_BW_8080:
- case BRCMU_CHSPEC_D11AC_BW_160:
-+ switch (ch->sb) {
-+ case BRCMU_CHAN_SB_LLL:
-+ ch->control_ch_num -= CH_70MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_LLU:
-+ ch->control_ch_num -= CH_50MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_LUL:
-+ ch->control_ch_num -= CH_30MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_LUU:
-+ ch->control_ch_num -= CH_10MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_ULL:
-+ ch->control_ch_num += CH_10MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_ULU:
-+ ch->control_ch_num += CH_30MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_UUL:
-+ ch->control_ch_num += CH_50MHZ_APART;
-+ break;
-+ case BRCMU_CHAN_SB_UUU:
-+ ch->control_ch_num += CH_70MHZ_APART;
-+ break;
-+ default:
-+ WARN_ON_ONCE(1);
-+ break;
-+ }
-+ break;
-+ case BRCMU_CHSPEC_D11AC_BW_8080:
- default:
- WARN_ON_ONCE(1);
- break;
---- a/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
-+++ b/drivers/net/wireless/broadcom/brcm80211/include/brcmu_wifi.h
-@@ -29,6 +29,8 @@
- #define CH_UPPER_SB 0x01
- #define CH_LOWER_SB 0x02
- #define CH_EWA_VALID 0x04
-+#define CH_70MHZ_APART 14
-+#define CH_50MHZ_APART 10
- #define CH_30MHZ_APART 6
- #define CH_20MHZ_APART 4
- #define CH_10MHZ_APART 2
+++ /dev/null
---- a/compat/Makefile
-+++ b/compat/Makefile
-@@ -79,5 +79,3 @@ obj-$(CPTCFG_BPAUTO_BUILD_CORDIC) += cor
- compat-$(CPTCFG_BPAUTO_PUBLIC_KEY) +=
- compat-$(CPTCFG_BPAUTO_BUCKET_LOCKS) += lib-bucket_locks.o
- compat-$(CPTCFG_BPAUTO_PKCS7) +=
--skcipher-objs += crypto-skcipher.o
--obj-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += skcipher.o
+++ /dev/null
---- a/compat/backport-4.12.c
-+++ b/compat/backport-4.12.c
-@@ -226,6 +226,7 @@ int bp_extack_genl_register_family(struc
- /* copy this since the family might access it directly */
- family->id = copy->family.id;
- family->attrbuf = copy->family.attrbuf;
-+ family->mcgrp_offset = copy->family.mcgrp_offset;
-
- #if LINUX_VERSION_IS_LESS(3,13,0) && RHEL_RELEASE_CODE < RHEL_RELEASE_VERSION(7,0)
- /* family ID from the original family struct will be used when building
--- a/local-symbols
+++ b/local-symbols
-@@ -396,43 +396,6 @@ USB_IPHETH=
+@@ -395,43 +395,6 @@ USB_IPHETH=
USB_SIERRA_NET=
USB_VL600=
USB_NET_CH9200=
select BRCMUTIL
--- a/Kconfig.local
+++ b/Kconfig.local
-@@ -1192,117 +1192,6 @@ config BACKPORTED_USB_VL600
+@@ -1189,117 +1189,6 @@ config BACKPORTED_USB_VL600
config BACKPORTED_USB_NET_CH9200
tristate
default USB_NET_CH9200
--- a/local-symbols
+++ b/local-symbols
-@@ -305,6 +305,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -304,6 +304,7 @@ RT2X00_LIB_FIRMWARE=
RT2X00_LIB_CRYPTO=
RT2X00_LIB_LEDS=
RT2X00_LIB_DEBUGFS=
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -3787,6 +3787,12 @@ out:
+@@ -3791,6 +3791,12 @@ out:
netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 29 Sep 2018 15:55:44 +0200
-Subject: [PATCH] mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode
- keys
-
-key->sta is only valid after ieee80211_key_link, which is called later
-in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is
-never set when management frame protection is enabled.
-
-Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys")
-Cc: stable@vger.kernel.org
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -427,7 +427,7 @@ static int ieee80211_add_key(struct wiph
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_AP_VLAN:
- /* Keys without a station are used for TX only */
-- if (key->sta && test_sta_flag(key->sta, WLAN_STA_MFP))
-+ if (sta && test_sta_flag(sta, WLAN_STA_MFP))
- key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT;
- break;
- case NL80211_IFTYPE_ADHOC:
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -561,6 +561,11 @@ static void ieee80211_report_used_skb(st
+@@ -558,6 +558,11 @@ static void ieee80211_report_used_skb(st
}
ieee80211_led_tx(local);
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -921,7 +921,7 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -925,7 +925,7 @@ ieee80211_tx_h_fragment(struct ieee80211
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
int frag_threshold = tx->local->hw.wiphy->frag_threshold;
int fragnum;
/* no matter what happens, tx->skb moves to tx->skbs */
-@@ -942,8 +942,6 @@ ieee80211_tx_h_fragment(struct ieee80211
+@@ -946,8 +946,6 @@ ieee80211_tx_h_fragment(struct ieee80211
if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU))
return TX_DROP;
/* internal error, why isn't DONTFRAG set? */
if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
return TX_DROP;
-@@ -1174,6 +1172,8 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1178,6 +1176,8 @@ ieee80211_tx_prepare(struct ieee80211_su
hdr = (struct ieee80211_hdr *) skb->data;
if (likely(sta)) {
if (!IS_ERR(sta))
tx->sta = sta;
-@@ -3497,6 +3497,7 @@ begin:
+@@ -3501,6 +3501,7 @@ begin:
tx.local = local;
tx.skb = skb;
tx.sdata = vif_to_sdata(info->control.vif);
if (txq->sta)
tx.sta = container_of(txq->sta, struct sta_info, sta);
-@@ -3833,6 +3834,7 @@ ieee80211_build_data_template(struct iee
+@@ -3837,6 +3838,7 @@ ieee80211_build_data_template(struct iee
hdr = (void *)skb->data;
tx.sta = sta_info_get(sdata, hdr->addr1);
tx.skb = skb;
struct rcu_head rcu_head;
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -658,9 +658,22 @@ void ieee80211_tx_monitor(struct ieee802
+@@ -655,9 +655,22 @@ void ieee80211_tx_monitor(struct ieee802
struct sk_buff *skb2;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_sub_if_data *sdata;
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -1171,8 +1171,7 @@ ieee80211_tx_prepare(struct ieee80211_su
+@@ -1175,8 +1175,7 @@ ieee80211_tx_prepare(struct ieee80211_su
info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING;
hdr = (struct ieee80211_hdr *) skb->data;
if (likely(sta)) {
if (!IS_ERR(sta))
-@@ -2205,7 +2204,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
+@@ -2209,7 +2208,7 @@ netdev_tx_t ieee80211_monitor_start_xmit
goto fail;
hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
if (skb->len < len_rthdr + hdrlen)
goto fail;
-@@ -2423,7 +2422,7 @@ static struct sk_buff *ieee80211_build_h
+@@ -2427,7 +2426,7 @@ static struct sk_buff *ieee80211_build_h
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_sub_if_data *ap_sdata;
enum nl80211_band band;
if (IS_ERR(sta))
sta = NULL;
-@@ -2643,6 +2642,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2647,6 +2646,9 @@ static struct sk_buff *ieee80211_build_h
hdrlen += 2;
}
/*
* Drop unicast frames to unauthorised stations unless they are
* EAPOL frames from the local station.
-@@ -2723,6 +2725,7 @@ static struct sk_buff *ieee80211_build_h
+@@ -2727,6 +2729,7 @@ static struct sk_buff *ieee80211_build_h
skb_pull(skb, skip_header_bytes);
head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb);
/*
* So we need to modify the skb header and hence need a copy of
-@@ -2755,6 +2758,9 @@ static struct sk_buff *ieee80211_build_h
+@@ -2759,6 +2762,9 @@ static struct sk_buff *ieee80211_build_h
memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen);
#endif
if (ieee80211_is_data_qos(fc)) {
__le16 *qos_control;
-@@ -2930,6 +2936,9 @@ void ieee80211_check_fast_xmit(struct st
+@@ -2934,6 +2940,9 @@ void ieee80211_check_fast_xmit(struct st
fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
}
/* We store the key here so there's no point in using rcu_dereference()
* but that's fine because the code that changes the pointers will call
* this function after doing so. For a single CPU that would be enough,
-@@ -3524,7 +3533,7 @@ begin:
+@@ -3528,7 +3537,7 @@ begin:
if (tx.key &&
(tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV))
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -3184,6 +3184,7 @@ static bool ieee80211_amsdu_aggregate(st
+@@ -3188,6 +3188,7 @@ static bool ieee80211_amsdu_aggregate(st
u8 max_subframes = sta->sta.max_amsdu_subframes;
int max_frags = local->hw.max_tx_fragments;
int max_amsdu_len = sta->sta.max_amsdu_len;
__be16 len;
void *data;
bool ret = false;
-@@ -3215,12 +3216,13 @@ static bool ieee80211_amsdu_aggregate(st
+@@ -3219,12 +3220,13 @@ static bool ieee80211_amsdu_aggregate(st
flow = fq_flow_classify(fq, tin, skb, fq_flow_get_default_func);
head = skb_peek_tail(&flow->queue);
if (!head)
nfrags = 1 + skb_shinfo(skb)->nr_frags;
nfrags += 1 + skb_shinfo(head)->nr_frags;
-@@ -3278,6 +3280,9 @@ out_recalc:
+@@ -3282,6 +3284,9 @@ out_recalc:
fq_recalc_backlog(fq, tin, flow);
}
out:
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
-@@ -987,6 +987,8 @@ void ieee80211_tx_status_ext(struct ieee
+@@ -984,6 +984,8 @@ void ieee80211_tx_status_ext(struct ieee
/* Track when last TDLS packet was ACKed */
if (test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH))
sta->status_stats.last_tdls_pkt_time = jiffies;
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
-@@ -435,8 +435,8 @@ ieee80211_tx_h_multicast_ps_buf(struct i
+@@ -439,8 +439,8 @@ ieee80211_tx_h_multicast_ps_buf(struct i
if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL))
info->hw_queue = tx->sdata->vif.cab_queue;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 22 Sep 2018 15:05:59 +0200
-Subject: [PATCH] mac80211: allocate TXQs for active monitor interfaces
-
-Monitor mode interfaces with the active flag are passed down to the driver.
-Drivers using TXQ expect that all interfaces have allocated TXQs before
-they get added.
-
-Fixes: 79af1f866193d ("mac80211: avoid allocating TXQs that won't be used")
-Cc: stable@vger.kernel.org
-Reported-by: Catrinel Catrinescu <cc@80211.de>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -1834,7 +1834,8 @@ int ieee80211_if_add(struct ieee80211_lo
-
- if (local->ops->wake_tx_queue &&
- type != NL80211_IFTYPE_AP_VLAN &&
-- type != NL80211_IFTYPE_MONITOR)
-+ (type != NL80211_IFTYPE_MONITOR ||
-+ (params->flags & MONITOR_FLAG_ACTIVE)))
- txq_size += sizeof(struct txq_info) +
- local->hw.txq_data_size;
-
projects / openwrt / staging / jow.git / commitdiff