obj-y := \
cache.o cacheinit.o entry.o \
- interrupt.o lock.o irqpanic.o arch_checks.o
+ interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
-obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
-obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
obj-$(CONFIG_PM) += pm.o dpmc.o
+++ /dev/null
-/*
- * File: arch/blackfin/mach-common/ints-priority-dc.c
- * Based on:
- * Author:
- *
- * Created: ?
- * Description: Set up the interrupt priorities
- *
- * Modified:
- * 1996 Roman Zippel
- * 1999 D. Jeff Dionne <jeff@uclinux.org>
- * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- * 2003 Metrowerks/Motorola
- * 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-#ifdef CONFIG_KGDB
-#include <linux/kgdb.h>
-#endif
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/irq_handler.h>
-
-/*
- * NOTES:
- * - we have separated the physical Hardware interrupt from the
- * levels that the LINUX kernel sees (see the description in irq.h)
- * -
- */
-
-/* Initialize this to an actual value to force it into the .data
- * section so that we know it is properly initialized at entry into
- * the kernel but before bss is initialized to zero (which is where
- * it would live otherwise). The 0x1f magic represents the IRQs we
- * cannot actually mask out in hardware.
- */
-unsigned long irq_flags = 0x1f;
-
-/* The number of spurious interrupts */
-atomic_t num_spurious;
-
-struct ivgx {
- /* irq number for request_irq, available in mach-bf561/irq.h */
- int irqno;
- /* corresponding bit in the SICA_ISR0 register */
- int isrflag0;
- /* corresponding bit in the SICA_ISR1 register */
- int isrflag1;
-} ivg_table[NR_PERI_INTS];
-
-struct ivg_slice {
- /* position of first irq in ivg_table for given ivg */
- struct ivgx *ifirst;
- struct ivgx *istop;
-} ivg7_13[IVG13 - IVG7 + 1];
-
-static void search_IAR(void);
-
-/*
- * Search SIC_IAR and fill tables with the irqvalues
- * and their positions in the SIC_ISR register.
- */
-static void __init search_IAR(void)
-{
- unsigned ivg, irq_pos = 0;
- for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
- int irqn;
-
- ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
-
- for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
- int iar_shift = (irqn & 7) * 4;
- if (ivg ==
- (0xf &
- bfin_read32((unsigned long *)SICA_IAR0 +
- (irqn >> 3)) >> iar_shift)) {
- ivg_table[irq_pos].irqno = IVG7 + irqn;
- ivg_table[irq_pos].isrflag0 =
- (irqn < 32 ? (1 << irqn) : 0);
- ivg_table[irq_pos].isrflag1 =
- (irqn < 32 ? 0 : (1 << (irqn - 32)));
- ivg7_13[ivg].istop++;
- irq_pos++;
- }
- }
- }
-}
-
-/*
- * This is for BF561 internal IRQs
- */
-
-static void ack_noop(unsigned int irq)
-{
- /* Dummy function. */
-}
-
-static void bf561_core_mask_irq(unsigned int irq)
-{
- irq_flags &= ~(1 << irq);
- if (!irqs_disabled())
- local_irq_enable();
-}
-
-static void bf561_core_unmask_irq(unsigned int irq)
-{
- irq_flags |= 1 << irq;
- /*
- * If interrupts are enabled, IMASK must contain the same value
- * as irq_flags. Make sure that invariant holds. If interrupts
- * are currently disabled we need not do anything; one of the
- * callers will take care of setting IMASK to the proper value
- * when reenabling interrupts.
- * local_irq_enable just does "STI irq_flags", so it's exactly
- * what we need.
- */
- if (!irqs_disabled())
- local_irq_enable();
- return;
-}
-
-static void bf561_internal_mask_irq(unsigned int irq)
-{
- unsigned long irq_mask;
- if ((irq - (IRQ_CORETMR + 1)) < 32) {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
- bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() & ~irq_mask);
- } else {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
- bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() & ~irq_mask);
- }
-}
-
-static void bf561_internal_unmask_irq(unsigned int irq)
-{
- unsigned long irq_mask;
-
- if ((irq - (IRQ_CORETMR + 1)) < 32) {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1)));
- bfin_write_SICA_IMASK0(bfin_read_SICA_IMASK0() | irq_mask);
- } else {
- irq_mask = (1 << (irq - (IRQ_CORETMR + 1) - 32));
- bfin_write_SICA_IMASK1(bfin_read_SICA_IMASK1() | irq_mask);
- }
- SSYNC();
-}
-
-static struct irq_chip bf561_core_irqchip = {
- .ack = ack_noop,
- .mask = bf561_core_mask_irq,
- .unmask = bf561_core_unmask_irq,
-};
-
-static struct irq_chip bf561_internal_irqchip = {
- .ack = ack_noop,
- .mask = bf561_internal_mask_irq,
- .unmask = bf561_internal_unmask_irq,
-};
-
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-static void bf561_gpio_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-}
-
-static void bf561_gpio_mask_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-
- set_gpio_maska(gpionr, 0);
- SSYNC();
-}
-
-static void bf561_gpio_mask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 0);
- SSYNC();
-}
-
-static void bf561_gpio_unmask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 1);
- SSYNC();
-}
-
-static unsigned int bf561_gpio_irq_startup(unsigned int irq)
-{
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq - IRQ_PF0;
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
-
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- bf561_gpio_unmask_irq(irq);
-
- return ret;
-
-}
-
-static void bf561_gpio_irq_shutdown(unsigned int irq)
-{
- bf561_gpio_mask_irq(irq);
- gpio_free(irq - IRQ_PF0);
- gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
-}
-
-static int bf561_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq - IRQ_PF0;
-
-
- if (type == IRQ_TYPE_PROBE) {
- /* only probe unenabled GPIO interrupt lines */
- if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-
- }
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
- IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
-
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- } else {
- gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- return 0;
- }
-
-
- set_gpio_dir(gpionr, 0);
- set_gpio_inen(gpionr, 1);
-
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- set_gpio_edge(gpionr, 1);
- } else {
- set_gpio_edge(gpionr, 0);
- gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- }
-
- if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_gpio_both(gpionr, 1);
- else
- set_gpio_both(gpionr, 0);
-
- if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
- set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
- else
- set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
-
- SSYNC();
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_irq_handler(irq, handle_edge_irq);
- else
- set_irq_handler(irq, handle_level_irq);
-
- return 0;
-}
-
-static struct irq_chip bf561_gpio_irqchip = {
- .ack = bf561_gpio_ack_irq,
- .mask = bf561_gpio_mask_irq,
- .mask_ack = bf561_gpio_mask_ack_irq,
- .unmask = bf561_gpio_unmask_irq,
- .set_type = bf561_gpio_irq_type,
- .startup = bf561_gpio_irq_startup,
- .shutdown = bf561_gpio_irq_shutdown
-};
-
-static void bf561_demux_gpio_irq(unsigned int inta_irq,
- struct irq_desc *intb_desc)
-{
- int irq, flag_d, mask;
- u16 gpio;
-
- switch (inta_irq) {
- case IRQ_PROG0_INTA:
- irq = IRQ_PF0;
- break;
- case IRQ_PROG1_INTA:
- irq = IRQ_PF16;
- break;
- case IRQ_PROG2_INTA:
- irq = IRQ_PF32;
- break;
- default:
- dump_stack();
- return;
- }
-
- gpio = irq - IRQ_PF0;
-
- flag_d = get_gpiop_data(gpio);
- mask = flag_d & (gpio_enabled[gpio_bank(gpio)] &
- get_gpiop_maska(gpio));
-
- do {
- if (mask & 1) {
- struct irq_desc *desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- }
- irq++;
- mask >>= 1;
- } while (mask);
-
-
-}
-
-void __init init_exception_vectors(void)
-{
- SSYNC();
-
- /* cannot program in software:
- * evt0 - emulation (jtag)
- * evt1 - reset
- */
- bfin_write_EVT2(evt_nmi);
- bfin_write_EVT3(trap);
- bfin_write_EVT5(evt_ivhw);
- bfin_write_EVT6(evt_timer);
- bfin_write_EVT7(evt_evt7);
- bfin_write_EVT8(evt_evt8);
- bfin_write_EVT9(evt_evt9);
- bfin_write_EVT10(evt_evt10);
- bfin_write_EVT11(evt_evt11);
- bfin_write_EVT12(evt_evt12);
- bfin_write_EVT13(evt_evt13);
- bfin_write_EVT14(evt14_softirq);
- bfin_write_EVT15(evt_system_call);
- CSYNC();
-}
-
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
-{
- int irq;
- unsigned long ilat = 0;
- /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
- bfin_write_SICA_IMASK0(SIC_UNMASK_ALL);
- bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
- SSYNC();
-
- bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
- bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
-
- local_irq_disable();
-
- init_exception_buff();
-
- for (irq = 0; irq <= SYS_IRQS; irq++) {
- if (irq <= IRQ_CORETMR)
- set_irq_chip(irq, &bf561_core_irqchip);
- else
- set_irq_chip(irq, &bf561_internal_irqchip);
-
- if ((irq != IRQ_PROG0_INTA) &&
- (irq != IRQ_PROG1_INTA) &&
- (irq != IRQ_PROG2_INTA))
- set_irq_handler(irq, handle_simple_irq);
- else
- set_irq_chained_handler(irq, bf561_demux_gpio_irq);
- }
-
- for (irq = IRQ_PF0; irq <= IRQ_PF47; irq++) {
- set_irq_chip(irq, &bf561_gpio_irqchip);
- /* if configured as edge, then will be changed to do_edge_IRQ */
- set_irq_handler(irq, handle_level_irq);
- }
-
- bfin_write_IMASK(0);
- CSYNC();
- ilat = bfin_read_ILAT();
- CSYNC();
- bfin_write_ILAT(ilat);
- CSYNC();
-
- printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
- /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
- * local_irq_enable()
- */
- program_IAR();
- /* Therefore it's better to setup IARs before interrupts enabled */
- search_IAR();
-
- /* Enable interrupts IVG7-15 */
- irq_flags = irq_flags | IMASK_IVG15 |
- IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
- IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
- return 0;
-}
-
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-void do_irq(int vec, struct pt_regs *fp)
-{
- if (vec == EVT_IVTMR_P) {
- vec = IRQ_CORETMR;
- } else {
- struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
- struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
- unsigned long sic_status0, sic_status1;
-
- SSYNC();
- sic_status0 = bfin_read_SICA_IMASK0() & bfin_read_SICA_ISR0();
- sic_status1 = bfin_read_SICA_IMASK1() & bfin_read_SICA_ISR1();
-
- for (;; ivg++) {
- if (ivg >= ivg_stop) {
- atomic_inc(&num_spurious);
- return;
- } else if ((sic_status0 & ivg->isrflag0) ||
- (sic_status1 & ivg->isrflag1))
- break;
- }
- vec = ivg->irqno;
- }
- asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
- kgdb_process_breakpoint();
-#endif
-}
+++ /dev/null
-/*
- * File: arch/blackfin/mach-common/ints-priority-sc.c
- * Based on:
- * Author:
- *
- * Created: ?
- * Description: Set up the interrupt priorities
- *
- * Modified:
- * 1996 Roman Zippel
- * 1999 D. Jeff Dionne <jeff@uclinux.org>
- * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- * 2003 Metrowerks/Motorola
- * 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/kernel_stat.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-#ifdef CONFIG_KGDB
-#include <linux/kgdb.h>
-#endif
-#include <asm/traps.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/irq_handler.h>
-
-#ifdef BF537_FAMILY
-# define BF537_GENERIC_ERROR_INT_DEMUX
-#else
-# undef BF537_GENERIC_ERROR_INT_DEMUX
-#endif
-
-/*
- * NOTES:
- * - we have separated the physical Hardware interrupt from the
- * levels that the LINUX kernel sees (see the description in irq.h)
- * -
- */
-
-/* Initialize this to an actual value to force it into the .data
- * section so that we know it is properly initialized at entry into
- * the kernel but before bss is initialized to zero (which is where
- * it would live otherwise). The 0x1f magic represents the IRQs we
- * cannot actually mask out in hardware.
- */
-unsigned long irq_flags = 0x1f;
-
-/* The number of spurious interrupts */
-atomic_t num_spurious;
-
-struct ivgx {
- /* irq number for request_irq, available in mach-bf533/irq.h */
- unsigned int irqno;
- /* corresponding bit in the SIC_ISR register */
- unsigned int isrflag;
-} ivg_table[NR_PERI_INTS];
-
-struct ivg_slice {
- /* position of first irq in ivg_table for given ivg */
- struct ivgx *ifirst;
- struct ivgx *istop;
-} ivg7_13[IVG13 - IVG7 + 1];
-
-static void search_IAR(void);
-
-/*
- * Search SIC_IAR and fill tables with the irqvalues
- * and their positions in the SIC_ISR register.
- */
-static void __init search_IAR(void)
-{
- unsigned ivg, irq_pos = 0;
- for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
- int irqn;
-
- ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
-
- for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
- int iar_shift = (irqn & 7) * 4;
- if (ivg ==
- (0xf &
-#ifndef CONFIG_BF52x
- bfin_read32((unsigned long *)SIC_IAR0 +
- (irqn >> 3)) >> iar_shift)) {
-#else
- bfin_read32((unsigned long *)SIC_IAR0 +
- ((irqn%32) >> 3) + ((irqn / 32) * 16)) >> iar_shift)) {
-#endif
- ivg_table[irq_pos].irqno = IVG7 + irqn;
- ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
- ivg7_13[ivg].istop++;
- irq_pos++;
- }
- }
- }
-}
-
-/*
- * This is for BF533 internal IRQs
- */
-
-static void ack_noop(unsigned int irq)
-{
- /* Dummy function. */
-}
-
-static void bfin_core_mask_irq(unsigned int irq)
-{
- irq_flags &= ~(1 << irq);
- if (!irqs_disabled())
- local_irq_enable();
-}
-
-static void bfin_core_unmask_irq(unsigned int irq)
-{
- irq_flags |= 1 << irq;
- /*
- * If interrupts are enabled, IMASK must contain the same value
- * as irq_flags. Make sure that invariant holds. If interrupts
- * are currently disabled we need not do anything; one of the
- * callers will take care of setting IMASK to the proper value
- * when reenabling interrupts.
- * local_irq_enable just does "STI irq_flags", so it's exactly
- * what we need.
- */
- if (!irqs_disabled())
- local_irq_enable();
- return;
-}
-
-static void bfin_internal_mask_irq(unsigned int irq)
-{
-#ifdef CONFIG_BF53x
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
- ~(1 << (irq - (IRQ_CORETMR + 1))));
-#else
- unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
- mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
- bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
- ~(1 << mask_bit));
-#endif
- SSYNC();
-}
-
-static void bfin_internal_unmask_irq(unsigned int irq)
-{
-#ifdef CONFIG_BF53x
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
- (1 << (irq - (IRQ_CORETMR + 1))));
-#else
- unsigned mask_bank, mask_bit;
- mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
- mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
- bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
- (1 << mask_bit));
-#endif
- SSYNC();
-}
-
-static struct irq_chip bfin_core_irqchip = {
- .ack = ack_noop,
- .mask = bfin_core_mask_irq,
- .unmask = bfin_core_unmask_irq,
-};
-
-static struct irq_chip bfin_internal_irqchip = {
- .ack = ack_noop,
- .mask = bfin_internal_mask_irq,
- .unmask = bfin_internal_unmask_irq,
-};
-
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
-static int error_int_mask;
-
-static void bfin_generic_error_ack_irq(unsigned int irq)
-{
-
-}
-
-static void bfin_generic_error_mask_irq(unsigned int irq)
-{
- error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
-
- if (!error_int_mask) {
- local_irq_disable();
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
- ~(1 <<
- (IRQ_GENERIC_ERROR -
- (IRQ_CORETMR + 1))));
- SSYNC();
- local_irq_enable();
- }
-}
-
-static void bfin_generic_error_unmask_irq(unsigned int irq)
-{
- local_irq_disable();
- bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
- (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
- SSYNC();
- local_irq_enable();
-
- error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
-}
-
-static struct irq_chip bfin_generic_error_irqchip = {
- .ack = bfin_generic_error_ack_irq,
- .mask = bfin_generic_error_mask_irq,
- .unmask = bfin_generic_error_unmask_irq,
-};
-
-static void bfin_demux_error_irq(unsigned int int_err_irq,
- struct irq_desc *intb_desc)
-{
- int irq = 0;
-
- SSYNC();
-
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
- if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
- irq = IRQ_MAC_ERROR;
- else
-#endif
- if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
- irq = IRQ_SPORT0_ERROR;
- else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
- irq = IRQ_SPORT1_ERROR;
- else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
- irq = IRQ_PPI_ERROR;
- else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
- irq = IRQ_CAN_ERROR;
- else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
- irq = IRQ_SPI_ERROR;
- else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
- (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
- irq = IRQ_UART0_ERROR;
- else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
- (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
- irq = IRQ_UART1_ERROR;
-
- if (irq) {
- if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
- struct irq_desc *desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- } else {
-
- switch (irq) {
- case IRQ_PPI_ERROR:
- bfin_write_PPI_STATUS(PPI_ERR_MASK);
- break;
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
- case IRQ_MAC_ERROR:
- bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
- break;
-#endif
- case IRQ_SPORT0_ERROR:
- bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
- break;
-
- case IRQ_SPORT1_ERROR:
- bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
- break;
-
- case IRQ_CAN_ERROR:
- bfin_write_CAN_GIS(CAN_ERR_MASK);
- break;
-
- case IRQ_SPI_ERROR:
- bfin_write_SPI_STAT(SPI_ERR_MASK);
- break;
-
- default:
- break;
- }
-
- pr_debug("IRQ %d:"
- " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
- irq);
- }
- } else
- printk(KERN_ERR
- "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
- " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
- __FUNCTION__, __FILE__, __LINE__);
-
-}
-#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
-
-#if !defined(CONFIG_BF54x)
-
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-
-static void bfin_gpio_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-}
-
-static void bfin_gpio_mask_ack_irq(unsigned int irq)
-{
- u16 gpionr = irq - IRQ_PF0;
-
- if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
- set_gpio_data(gpionr, 0);
- SSYNC();
- }
-
- set_gpio_maska(gpionr, 0);
- SSYNC();
-}
-
-static void bfin_gpio_mask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 0);
- SSYNC();
-}
-
-static void bfin_gpio_unmask_irq(unsigned int irq)
-{
- set_gpio_maska(irq - IRQ_PF0, 1);
- SSYNC();
-}
-
-static unsigned int bfin_gpio_irq_startup(unsigned int irq)
-{
- unsigned int ret;
- u16 gpionr = irq - IRQ_PF0;
- char buf[8];
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- bfin_gpio_unmask_irq(irq);
-
- return ret;
-}
-
-static void bfin_gpio_irq_shutdown(unsigned int irq)
-{
- bfin_gpio_mask_irq(irq);
- gpio_free(irq - IRQ_PF0);
- gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
-}
-
-static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq - IRQ_PF0;
-
- if (type == IRQ_TYPE_PROBE) {
- /* only probe unenabled GPIO interrupt lines */
- if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
- IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- } else {
- gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- return 0;
- }
-
- set_gpio_dir(gpionr, 0);
- set_gpio_inen(gpionr, 1);
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- set_gpio_edge(gpionr, 1);
- } else {
- set_gpio_edge(gpionr, 0);
- gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- }
-
- if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_gpio_both(gpionr, 1);
- else
- set_gpio_both(gpionr, 0);
-
- if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
- set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
- else
- set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
-
- SSYNC();
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- set_irq_handler(irq, handle_edge_irq);
- else
- set_irq_handler(irq, handle_level_irq);
-
- return 0;
-}
-
-static struct irq_chip bfin_gpio_irqchip = {
- .ack = bfin_gpio_ack_irq,
- .mask = bfin_gpio_mask_irq,
- .mask_ack = bfin_gpio_mask_ack_irq,
- .unmask = bfin_gpio_unmask_irq,
- .set_type = bfin_gpio_irq_type,
- .startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
-};
-
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
- struct irq_desc *intb_desc)
-{
- u16 i;
- struct irq_desc *desc;
-
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
- int irq = IRQ_PF0 + i;
- int flag_d = get_gpiop_data(i);
- int mask =
- flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
-
- while (mask) {
- if (mask & 1) {
- desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- }
- irq++;
- mask >>= 1;
- }
- }
-}
-
-#else /* CONFIG_BF54x */
-
-#define NR_PINT_SYS_IRQS 4
-#define NR_PINT_BITS 32
-#define NR_PINTS 160
-#define IRQ_NOT_AVAIL 0xFF
-
-#define PINT_2_BANK(x) ((x) >> 5)
-#define PINT_2_BIT(x) ((x) & 0x1F)
-#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
-
-static unsigned char irq2pint_lut[NR_PINTS];
-static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
-
-static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS];
-static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
-
-
-struct pin_int_t {
- unsigned int mask_set;
- unsigned int mask_clear;
- unsigned int request;
- unsigned int assign;
- unsigned int edge_set;
- unsigned int edge_clear;
- unsigned int invert_set;
- unsigned int invert_clear;
- unsigned int pinstate;
- unsigned int latch;
-};
-
-static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
- (struct pin_int_t *)PINT0_MASK_SET,
- (struct pin_int_t *)PINT1_MASK_SET,
- (struct pin_int_t *)PINT2_MASK_SET,
- (struct pin_int_t *)PINT3_MASK_SET,
-};
-
-unsigned short get_irq_base(u8 bank, u8 bmap)
-{
-
- u16 irq_base;
-
- if (bank < 2) { /*PA-PB */
- irq_base = IRQ_PA0 + bmap * 16;
- } else { /*PC-PJ */
- irq_base = IRQ_PC0 + bmap * 16;
- }
-
- return irq_base;
-
-}
-
- /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
-void init_pint_lut(void)
-{
- u16 bank, bit, irq_base, bit_pos;
- u32 pint_assign;
- u8 bmap;
-
- memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
-
- for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
-
- pint_assign = pint[bank]->assign;
-
- for (bit = 0; bit < NR_PINT_BITS; bit++) {
-
- bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
-
- irq_base = get_irq_base(bank, bmap);
-
- irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
- bit_pos = bit + bank * NR_PINT_BITS;
-
- pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
- irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
-
- }
-
- }
-
-}
-
-static void bfin_gpio_ack_irq(unsigned int irq)
-{
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
- u32 pintbit = PINT_BIT(pint_val);
- u8 bank = PINT_2_BANK(pint_val);
-
- if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
- if (pint[bank]->invert_set & pintbit)
- pint[bank]->invert_clear = pintbit;
- else
- pint[bank]->invert_set = pintbit;
- }
- pint[bank]->request = pintbit;
-
- SSYNC();
-}
-
-static void bfin_gpio_mask_ack_irq(unsigned int irq)
-{
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
- u32 pintbit = PINT_BIT(pint_val);
- u8 bank = PINT_2_BANK(pint_val);
-
- if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
- if (pint[bank]->invert_set & pintbit)
- pint[bank]->invert_clear = pintbit;
- else
- pint[bank]->invert_set = pintbit;
- }
-
- pint[bank]->request = pintbit;
- pint[bank]->mask_clear = pintbit;
- SSYNC();
-}
-
-static void bfin_gpio_mask_irq(unsigned int irq)
-{
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
-
- pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
- SSYNC();
-}
-
-static void bfin_gpio_unmask_irq(unsigned int irq)
-{
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
- u32 pintbit = PINT_BIT(pint_val);
- u8 bank = PINT_2_BANK(pint_val);
-
- pint[bank]->request = pintbit;
- pint[bank]->mask_set = pintbit;
- SSYNC();
-}
-
-static unsigned int bfin_gpio_irq_startup(unsigned int irq)
-{
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq_to_gpio(irq);
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
-
- if (pint_val == IRQ_NOT_AVAIL) {
- printk(KERN_ERR
- "GPIO IRQ %d :Not in PINT Assign table "
- "Reconfigure Interrupt to Port Assignemt\n", irq);
- return -ENODEV;
- }
-
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- bfin_gpio_unmask_irq(irq);
-
- return ret;
-}
-
-static void bfin_gpio_irq_shutdown(unsigned int irq)
-{
- u16 gpionr = irq_to_gpio(irq);
-
- bfin_gpio_mask_irq(irq);
- gpio_free(gpionr);
- gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
-}
-
-static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-
- unsigned int ret;
- char buf[8];
- u16 gpionr = irq_to_gpio(irq);
- u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
- u32 pintbit = PINT_BIT(pint_val);
- u8 bank = PINT_2_BANK(pint_val);
-
- if (pint_val == IRQ_NOT_AVAIL)
- return -ENODEV;
-
- if (type == IRQ_TYPE_PROBE) {
- /* only probe unenabled GPIO interrupt lines */
- if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
- IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
- if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
- snprintf(buf, sizeof buf, "IRQ %d", irq);
- ret = gpio_request(gpionr, buf);
- if (ret)
- return ret;
- }
-
- gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
- } else {
- gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
- return 0;
- }
-
- gpio_direction_input(gpionr);
-
- if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
- pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
- else
- pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */
-
- if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
- == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
-
- gpio_both_edge_triggered[bank] |= pintbit;
-
- if (gpio_get_value(gpionr))
- pint[bank]->invert_set = pintbit;
- else
- pint[bank]->invert_clear = pintbit;
- } else {
- gpio_both_edge_triggered[bank] &= ~pintbit;
- }
-
- if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
- pint[bank]->edge_set = pintbit;
- set_irq_handler(irq, handle_edge_irq);
- } else {
- pint[bank]->edge_clear = pintbit;
- set_irq_handler(irq, handle_level_irq);
- }
-
- SSYNC();
-
- return 0;
-}
-
-static struct irq_chip bfin_gpio_irqchip = {
- .ack = bfin_gpio_ack_irq,
- .mask = bfin_gpio_mask_irq,
- .mask_ack = bfin_gpio_mask_ack_irq,
- .unmask = bfin_gpio_unmask_irq,
- .set_type = bfin_gpio_irq_type,
- .startup = bfin_gpio_irq_startup,
- .shutdown = bfin_gpio_irq_shutdown
-};
-
-static void bfin_demux_gpio_irq(unsigned int intb_irq,
- struct irq_desc *intb_desc)
-{
- u8 bank, pint_val;
- u32 request, irq;
- struct irq_desc *desc;
-
- switch (intb_irq) {
- case IRQ_PINT0:
- bank = 0;
- break;
- case IRQ_PINT2:
- bank = 2;
- break;
- case IRQ_PINT3:
- bank = 3;
- break;
- case IRQ_PINT1:
- bank = 1;
- break;
- default:
- return;
- }
-
- pint_val = bank * NR_PINT_BITS;
-
- request = pint[bank]->request;
-
- while (request) {
- if (request & 1) {
- irq = pint2irq_lut[pint_val] + SYS_IRQS;
- desc = irq_desc + irq;
- desc->handle_irq(irq, desc);
- }
- pint_val++;
- request >>= 1;
- }
-
-}
-#endif
-
-void __init init_exception_vectors(void)
-{
- SSYNC();
-
- /* cannot program in software:
- * evt0 - emulation (jtag)
- * evt1 - reset
- */
- bfin_write_EVT2(evt_nmi);
- bfin_write_EVT3(trap);
- bfin_write_EVT5(evt_ivhw);
- bfin_write_EVT6(evt_timer);
- bfin_write_EVT7(evt_evt7);
- bfin_write_EVT8(evt_evt8);
- bfin_write_EVT9(evt_evt9);
- bfin_write_EVT10(evt_evt10);
- bfin_write_EVT11(evt_evt11);
- bfin_write_EVT12(evt_evt12);
- bfin_write_EVT13(evt_evt13);
- bfin_write_EVT14(evt14_softirq);
- bfin_write_EVT15(evt_system_call);
- CSYNC();
-}
-
-/*
- * This function should be called during kernel startup to initialize
- * the BFin IRQ handling routines.
- */
-int __init init_arch_irq(void)
-{
- int irq;
- unsigned long ilat = 0;
- /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
- bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
- bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
-# ifdef CONFIG_BF54x
- bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
-# endif
-#else
- bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
-#endif
- SSYNC();
-
- local_irq_disable();
-
-#ifdef CONFIG_BF54x
-# ifdef CONFIG_PINTx_REASSIGN
- pint[0]->assign = CONFIG_PINT0_ASSIGN;
- pint[1]->assign = CONFIG_PINT1_ASSIGN;
- pint[2]->assign = CONFIG_PINT2_ASSIGN;
- pint[3]->assign = CONFIG_PINT3_ASSIGN;
-# endif
- /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
- init_pint_lut();
-#endif
-
- for (irq = 0; irq <= SYS_IRQS; irq++) {
- if (irq <= IRQ_CORETMR)
- set_irq_chip(irq, &bfin_core_irqchip);
- else
- set_irq_chip(irq, &bfin_internal_irqchip);
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- if (irq != IRQ_GENERIC_ERROR) {
-#endif
-
- switch (irq) {
-#if defined(CONFIG_BF53x)
- case IRQ_PROG_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
-# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
- case IRQ_MAC_RX:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
-# endif
-#elif defined(CONFIG_BF54x)
- case IRQ_PINT0:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT1:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT2:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PINT3:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
-#elif defined(CONFIG_BF52x)
- case IRQ_PORTF_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PORTG_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
- case IRQ_PORTH_INTA:
- set_irq_chained_handler(irq,
- bfin_demux_gpio_irq);
- break;
-#endif
- default:
- set_irq_handler(irq, handle_simple_irq);
- break;
- }
-
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- } else {
- set_irq_handler(irq, bfin_demux_error_irq);
- }
-#endif
- }
-#ifdef BF537_GENERIC_ERROR_INT_DEMUX
- for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
- set_irq_chip(irq, &bfin_generic_error_irqchip);
- set_irq_handler(irq, handle_level_irq);
- }
-#endif
-
-#ifndef CONFIG_BF54x
- for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
-#else
- for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
-#endif
- set_irq_chip(irq, &bfin_gpio_irqchip);
- /* if configured as edge, then will be changed to do_edge_IRQ */
- set_irq_handler(irq, handle_level_irq);
- }
-
- bfin_write_IMASK(0);
- CSYNC();
- ilat = bfin_read_ILAT();
- CSYNC();
- bfin_write_ILAT(ilat);
- CSYNC();
-
- printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
- /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
- * local_irq_enable()
- */
- program_IAR();
- /* Therefore it's better to setup IARs before interrupts enabled */
- search_IAR();
-
- /* Enable interrupts IVG7-15 */
- irq_flags = irq_flags | IMASK_IVG15 |
- IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
- IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
-
- return 0;
-}
-
-#ifdef CONFIG_DO_IRQ_L1
-__attribute__((l1_text))
-#endif
-void do_irq(int vec, struct pt_regs *fp)
-{
- if (vec == EVT_IVTMR_P) {
- vec = IRQ_CORETMR;
- } else {
- struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
- struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
-#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
- unsigned long sic_status[3];
-
- SSYNC();
- sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
- sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
-#ifdef CONFIG_BF54x
- sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
-#endif
- for (;; ivg++) {
- if (ivg >= ivg_stop) {
- atomic_inc(&num_spurious);
- return;
- }
- if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
- break;
- }
-#else
- unsigned long sic_status;
- SSYNC();
- sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
-
- for (;; ivg++) {
- if (ivg >= ivg_stop) {
- atomic_inc(&num_spurious);
- return;
- } else if (sic_status & ivg->isrflag)
- break;
- }
-#endif
- vec = ivg->irqno;
- }
- asm_do_IRQ(vec, fp);
-
-#ifdef CONFIG_KGDB
- kgdb_process_breakpoint();
-#endif
-}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-common/ints-priority-sc.c
+ * Based on:
+ * Author:
+ *
+ * Created: ?
+ * Description: Set up the interrupt priorities
+ *
+ * Modified:
+ * 1996 Roman Zippel
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2003 Metrowerks/Motorola
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel_stat.h>
+#include <linux/seq_file.h>
+#include <linux/irq.h>
+#ifdef CONFIG_KGDB
+#include <linux/kgdb.h>
+#endif
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/irq_handler.h>
+
+#ifdef BF537_FAMILY
+# define BF537_GENERIC_ERROR_INT_DEMUX
+#else
+# undef BF537_GENERIC_ERROR_INT_DEMUX
+#endif
+
+/*
+ * NOTES:
+ * - we have separated the physical Hardware interrupt from the
+ * levels that the LINUX kernel sees (see the description in irq.h)
+ * -
+ */
+
+/* Initialize this to an actual value to force it into the .data
+ * section so that we know it is properly initialized at entry into
+ * the kernel but before bss is initialized to zero (which is where
+ * it would live otherwise). The 0x1f magic represents the IRQs we
+ * cannot actually mask out in hardware.
+ */
+unsigned long irq_flags = 0x1f;
+
+/* The number of spurious interrupts */
+atomic_t num_spurious;
+
+struct ivgx {
+ /* irq number for request_irq, available in mach-bf533/irq.h */
+ unsigned int irqno;
+ /* corresponding bit in the SIC_ISR register */
+ unsigned int isrflag;
+} ivg_table[NR_PERI_INTS];
+
+struct ivg_slice {
+ /* position of first irq in ivg_table for given ivg */
+ struct ivgx *ifirst;
+ struct ivgx *istop;
+} ivg7_13[IVG13 - IVG7 + 1];
+
+static void search_IAR(void);
+
+/*
+ * Search SIC_IAR and fill tables with the irqvalues
+ * and their positions in the SIC_ISR register.
+ */
+static void __init search_IAR(void)
+{
+ unsigned ivg, irq_pos = 0;
+ for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
+ int irqn;
+
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
+
+ for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
+ int iar_shift = (irqn & 7) * 4;
+ if (ivg == (0xf &
+#ifndef CONFIG_BF52x
+ bfin_read32((unsigned long *)SIC_IAR0 +
+ (irqn >> 3)) >> iar_shift)) {
+#else
+ bfin_read32((unsigned long *)SIC_IAR0 +
+ ((irqn%32) >> 3) + ((irqn / 32) * 16)) >> iar_shift)) {
+#endif
+ ivg_table[irq_pos].irqno = IVG7 + irqn;
+ ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
+ ivg7_13[ivg].istop++;
+ irq_pos++;
+ }
+ }
+ }
+}
+
+/*
+ * This is for BF533 internal IRQs
+ */
+
+static void ack_noop(unsigned int irq)
+{
+ /* Dummy function. */
+}
+
+static void bfin_core_mask_irq(unsigned int irq)
+{
+ irq_flags &= ~(1 << irq);
+ if (!irqs_disabled())
+ local_irq_enable();
+}
+
+static void bfin_core_unmask_irq(unsigned int irq)
+{
+ irq_flags |= 1 << irq;
+ /*
+ * If interrupts are enabled, IMASK must contain the same value
+ * as irq_flags. Make sure that invariant holds. If interrupts
+ * are currently disabled we need not do anything; one of the
+ * callers will take care of setting IMASK to the proper value
+ * when reenabling interrupts.
+ * local_irq_enable just does "STI irq_flags", so it's exactly
+ * what we need.
+ */
+ if (!irqs_disabled())
+ local_irq_enable();
+ return;
+}
+
+static void bfin_internal_mask_irq(unsigned int irq)
+{
+#ifdef CONFIG_BF53x
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 << (irq - (IRQ_CORETMR + 1))));
+#else
+ unsigned mask_bank, mask_bit;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
+ ~(1 << mask_bit));
+#endif
+ SSYNC();
+}
+
+static void bfin_internal_unmask_irq(unsigned int irq)
+{
+#ifdef CONFIG_BF53x
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
+ (1 << (irq - (IRQ_CORETMR + 1))));
+#else
+ unsigned mask_bank, mask_bit;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
+ (1 << mask_bit));
+#endif
+ SSYNC();
+}
+
+static struct irq_chip bfin_core_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_core_mask_irq,
+ .unmask = bfin_core_unmask_irq,
+};
+
+static struct irq_chip bfin_internal_irqchip = {
+ .ack = ack_noop,
+ .mask = bfin_internal_mask_irq,
+ .unmask = bfin_internal_unmask_irq,
+};
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+static int error_int_mask;
+
+static void bfin_generic_error_ack_irq(unsigned int irq)
+{
+
+}
+
+static void bfin_generic_error_mask_irq(unsigned int irq)
+{
+ error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
+
+ if (!error_int_mask) {
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
+ ~(1 << (IRQ_GENERIC_ERROR -
+ (IRQ_CORETMR + 1))));
+ SSYNC();
+ local_irq_enable();
+ }
+}
+
+static void bfin_generic_error_unmask_irq(unsigned int irq)
+{
+ local_irq_disable();
+ bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
+ (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
+ SSYNC();
+ local_irq_enable();
+
+ error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
+}
+
+static struct irq_chip bfin_generic_error_irqchip = {
+ .ack = bfin_generic_error_ack_irq,
+ .mask = bfin_generic_error_mask_irq,
+ .unmask = bfin_generic_error_unmask_irq,
+};
+
+static void bfin_demux_error_irq(unsigned int int_err_irq,
+ struct irq_desc *inta_desc)
+{
+ int irq = 0;
+
+ SSYNC();
+
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
+ irq = IRQ_MAC_ERROR;
+ else
+#endif
+ if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT0_ERROR;
+ else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
+ irq = IRQ_SPORT1_ERROR;
+ else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
+ irq = IRQ_PPI_ERROR;
+ else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
+ irq = IRQ_CAN_ERROR;
+ else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
+ irq = IRQ_SPI_ERROR;
+ else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART0_ERROR;
+ else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
+ (bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
+ irq = IRQ_UART1_ERROR;
+
+ if (irq) {
+ if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
+ struct irq_desc *desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ } else {
+
+ switch (irq) {
+ case IRQ_PPI_ERROR:
+ bfin_write_PPI_STATUS(PPI_ERR_MASK);
+ break;
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
+ case IRQ_MAC_ERROR:
+ bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
+ break;
+#endif
+ case IRQ_SPORT0_ERROR:
+ bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_SPORT1_ERROR:
+ bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
+ break;
+
+ case IRQ_CAN_ERROR:
+ bfin_write_CAN_GIS(CAN_ERR_MASK);
+ break;
+
+ case IRQ_SPI_ERROR:
+ bfin_write_SPI_STAT(SPI_ERR_MASK);
+ break;
+
+ default:
+ break;
+ }
+
+ pr_debug("IRQ %d:"
+ " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+ irq);
+ }
+ } else
+ printk(KERN_ERR
+ "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
+ " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
+ __FUNCTION__, __FILE__, __LINE__);
+
+}
+#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
+
+#if !defined(CONFIG_BF54x)
+
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ set_gpio_data(gpionr, 0);
+ SSYNC();
+ }
+
+ set_gpio_maska(gpionr, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 0);
+ SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+ set_gpio_maska(irq - IRQ_PF0, 1);
+ SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PF0;
+ char buf[8];
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ snprintf(buf, sizeof buf, "IRQ %d", irq);
+ ret = gpio_request(gpionr, buf);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bfin_gpio_unmask_irq(irq);
+
+ return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+ bfin_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PF0);
+ gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ char buf[8];
+ u16 gpionr = irq - IRQ_PF0;
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ snprintf(buf, sizeof buf, "IRQ %d", irq);
+ ret = gpio_request(gpionr, buf);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+ set_gpio_dir(gpionr, 0);
+ set_gpio_inen(gpionr, 1);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ set_gpio_edge(gpionr, 1);
+ } else {
+ set_gpio_edge(gpionr, 0);
+ gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_gpio_both(gpionr, 1);
+ else
+ set_gpio_both(gpionr, 0);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
+ else
+ set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_chip bfin_gpio_irqchip = {
+ .ack = bfin_gpio_ack_irq,
+ .mask = bfin_gpio_mask_irq,
+ .mask_ack = bfin_gpio_mask_ack_irq,
+ .unmask = bfin_gpio_unmask_irq,
+ .set_type = bfin_gpio_irq_type,
+ .startup = bfin_gpio_irq_startup,
+ .shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *desc)
+{
+ unsigned int i, gpio, mask, irq, search = 0;
+
+ switch (inta_irq) {
+#if defined(CONFIG_BF53x)
+ case IRQ_PROG_INTA:
+ irq = IRQ_PF0;
+ search = 1;
+ break;
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ case IRQ_MAC_RX:
+ irq = IRQ_PH0;
+ break;
+# endif
+#elif defined(CONFIG_BF52x)
+ case IRQ_PORTF_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PORTG_INTA:
+ irq = IRQ_PG0;
+ break;
+ case IRQ_PORTH_INTA:
+ irq = IRQ_PH0;
+ break;
+#elif defined(CONFIG_BF561)
+ case IRQ_PROG0_INTA:
+ irq = IRQ_PF0;
+ break;
+ case IRQ_PROG1_INTA:
+ irq = IRQ_PF16;
+ break;
+ case IRQ_PROG2_INTA:
+ irq = IRQ_PF32;
+ break;
+#endif
+ default:
+ BUG();
+ return;
+ }
+
+ if (search) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
+ irq += i;
+
+ mask = get_gpiop_data(i) &
+ (gpio_enabled[gpio_bank(i)] &
+ get_gpiop_maska(i));
+
+ while (mask) {
+ if (mask & 1) {
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ }
+ }
+ } else {
+ gpio = irq_to_gpio(irq);
+ mask = get_gpiop_data(gpio) &
+ (gpio_enabled[gpio_bank(gpio)] &
+ get_gpiop_maska(gpio));
+
+ do {
+ if (mask & 1) {
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ irq++;
+ mask >>= 1;
+ } while (mask);
+ }
+
+}
+
+#else /* CONFIG_BF54x */
+
+#define NR_PINT_SYS_IRQS 4
+#define NR_PINT_BITS 32
+#define NR_PINTS 160
+#define IRQ_NOT_AVAIL 0xFF
+
+#define PINT_2_BANK(x) ((x) >> 5)
+#define PINT_2_BIT(x) ((x) & 0x1F)
+#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
+
+static unsigned char irq2pint_lut[NR_PINTS];
+static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
+
+static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS];
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+
+struct pin_int_t {
+ unsigned int mask_set;
+ unsigned int mask_clear;
+ unsigned int request;
+ unsigned int assign;
+ unsigned int edge_set;
+ unsigned int edge_clear;
+ unsigned int invert_set;
+ unsigned int invert_clear;
+ unsigned int pinstate;
+ unsigned int latch;
+};
+
+static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
+ (struct pin_int_t *)PINT0_MASK_SET,
+ (struct pin_int_t *)PINT1_MASK_SET,
+ (struct pin_int_t *)PINT2_MASK_SET,
+ (struct pin_int_t *)PINT3_MASK_SET,
+};
+
+unsigned short get_irq_base(u8 bank, u8 bmap)
+{
+
+ u16 irq_base;
+
+ if (bank < 2) { /*PA-PB */
+ irq_base = IRQ_PA0 + bmap * 16;
+ } else { /*PC-PJ */
+ irq_base = IRQ_PC0 + bmap * 16;
+ }
+
+ return irq_base;
+
+}
+
+ /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+void init_pint_lut(void)
+{
+ u16 bank, bit, irq_base, bit_pos;
+ u32 pint_assign;
+ u8 bmap;
+
+ memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
+
+ for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
+
+ pint_assign = pint[bank]->assign;
+
+ for (bit = 0; bit < NR_PINT_BITS; bit++) {
+
+ bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
+
+ irq_base = get_irq_base(bank, bmap);
+
+ irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
+ bit_pos = bit + bank * NR_PINT_BITS;
+
+ pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
+ irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
+
+ }
+
+ }
+
+}
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
+ if (pint[bank]->invert_set & pintbit)
+ pint[bank]->invert_clear = pintbit;
+ else
+ pint[bank]->invert_set = pintbit;
+ }
+ pint[bank]->request = pintbit;
+
+ SSYNC();
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
+ if (pint[bank]->invert_set & pintbit)
+ pint[bank]->invert_clear = pintbit;
+ else
+ pint[bank]->invert_set = pintbit;
+ }
+
+ pint[bank]->request = pintbit;
+ pint[bank]->mask_clear = pintbit;
+ SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+ pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
+ SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ pint[bank]->request = pintbit;
+ pint[bank]->mask_set = pintbit;
+ SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ char buf[8];
+ u16 gpionr = irq_to_gpio(irq);
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+ if (pint_val == IRQ_NOT_AVAIL) {
+ printk(KERN_ERR
+ "GPIO IRQ %d :Not in PINT Assign table "
+ "Reconfigure Interrupt to Port Assignemt\n", irq);
+ return -ENODEV;
+ }
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ snprintf(buf, sizeof buf, "IRQ %d", irq);
+ ret = gpio_request(gpionr, buf);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bfin_gpio_unmask_irq(irq);
+
+ return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+ u16 gpionr = irq_to_gpio(irq);
+
+ bfin_gpio_mask_irq(irq);
+ gpio_free(gpionr);
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ char buf[8];
+ u16 gpionr = irq_to_gpio(irq);
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ if (pint_val == IRQ_NOT_AVAIL)
+ return -ENODEV;
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ snprintf(buf, sizeof buf, "IRQ %d", irq);
+ ret = gpio_request(gpionr, buf);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+ gpio_direction_input(gpionr);
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
+ else
+ pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */
+
+ if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ == (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+
+ gpio_both_edge_triggered[bank] |= pintbit;
+
+ if (gpio_get_value(gpionr))
+ pint[bank]->invert_set = pintbit;
+ else
+ pint[bank]->invert_clear = pintbit;
+ } else {
+ gpio_both_edge_triggered[bank] &= ~pintbit;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ pint[bank]->edge_set = pintbit;
+ set_irq_handler(irq, handle_edge_irq);
+ } else {
+ pint[bank]->edge_clear = pintbit;
+ set_irq_handler(irq, handle_level_irq);
+ }
+
+ SSYNC();
+
+ return 0;
+}
+
+static struct irq_chip bfin_gpio_irqchip = {
+ .ack = bfin_gpio_ack_irq,
+ .mask = bfin_gpio_mask_irq,
+ .mask_ack = bfin_gpio_mask_ack_irq,
+ .unmask = bfin_gpio_unmask_irq,
+ .set_type = bfin_gpio_irq_type,
+ .startup = bfin_gpio_irq_startup,
+ .shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int inta_irq,
+ struct irq_desc *desc)
+{
+ u8 bank, pint_val;
+ u32 request, irq;
+
+ switch (inta_irq) {
+ case IRQ_PINT0:
+ bank = 0;
+ break;
+ case IRQ_PINT2:
+ bank = 2;
+ break;
+ case IRQ_PINT3:
+ bank = 3;
+ break;
+ case IRQ_PINT1:
+ bank = 1;
+ break;
+ default:
+ return;
+ }
+
+ pint_val = bank * NR_PINT_BITS;
+
+ request = pint[bank]->request;
+
+ while (request) {
+ if (request & 1) {
+ irq = pint2irq_lut[pint_val] + SYS_IRQS;
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ pint_val++;
+ request >>= 1;
+ }
+
+}
+#endif
+
+void __init init_exception_vectors(void)
+{
+ SSYNC();
+
+ /* cannot program in software:
+ * evt0 - emulation (jtag)
+ * evt1 - reset
+ */
+ bfin_write_EVT2(evt_nmi);
+ bfin_write_EVT3(trap);
+ bfin_write_EVT5(evt_ivhw);
+ bfin_write_EVT6(evt_timer);
+ bfin_write_EVT7(evt_evt7);
+ bfin_write_EVT8(evt_evt8);
+ bfin_write_EVT9(evt_evt9);
+ bfin_write_EVT10(evt_evt10);
+ bfin_write_EVT11(evt_evt11);
+ bfin_write_EVT12(evt_evt12);
+ bfin_write_EVT13(evt_evt13);
+ bfin_write_EVT14(evt14_softirq);
+ bfin_write_EVT15(evt_system_call);
+ CSYNC();
+}
+
+/*
+ * This function should be called during kernel startup to initialize
+ * the BFin IRQ handling routines.
+ */
+int __init init_arch_irq(void)
+{
+ int irq;
+ unsigned long ilat = 0;
+ /* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
+ bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
+ bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+# ifdef CONFIG_BF54x
+ bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
+ bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+# endif
+#else
+ bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+ SSYNC();
+
+ local_irq_disable();
+
+ init_exception_buff();
+
+#ifdef CONFIG_BF54x
+# ifdef CONFIG_PINTx_REASSIGN
+ pint[0]->assign = CONFIG_PINT0_ASSIGN;
+ pint[1]->assign = CONFIG_PINT1_ASSIGN;
+ pint[2]->assign = CONFIG_PINT2_ASSIGN;
+ pint[3]->assign = CONFIG_PINT3_ASSIGN;
+# endif
+ /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+ init_pint_lut();
+#endif
+
+ for (irq = 0; irq <= SYS_IRQS; irq++) {
+ if (irq <= IRQ_CORETMR)
+ set_irq_chip(irq, &bfin_core_irqchip);
+ else
+ set_irq_chip(irq, &bfin_internal_irqchip);
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ if (irq != IRQ_GENERIC_ERROR) {
+#endif
+
+ switch (irq) {
+#if defined(CONFIG_BF53x)
+ case IRQ_PROG_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ case IRQ_MAC_RX:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+# endif
+#elif defined(CONFIG_BF54x)
+ case IRQ_PINT0:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PINT1:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PINT2:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PINT3:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+#elif defined(CONFIG_BF52x)
+ case IRQ_PORTF_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PORTG_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PORTH_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+#elif defined(CONFIG_BF561)
+ case IRQ_PROG0_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PROG1_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PROG2_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+#endif
+ default:
+ set_irq_handler(irq, handle_simple_irq);
+ break;
+ }
+
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ } else {
+ set_irq_handler(irq, bfin_demux_error_irq);
+ }
+#endif
+ }
+#ifdef BF537_GENERIC_ERROR_INT_DEMUX
+ for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
+ set_irq_chip(irq, &bfin_generic_error_irqchip);
+ set_irq_handler(irq, handle_level_irq);
+ }
+#endif
+
+ for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) {
+
+ set_irq_chip(irq, &bfin_gpio_irqchip);
+ /* if configured as edge, then will be changed to do_edge_IRQ */
+ set_irq_handler(irq, handle_level_irq);
+ }
+
+ bfin_write_IMASK(0);
+ CSYNC();
+ ilat = bfin_read_ILAT();
+ CSYNC();
+ bfin_write_ILAT(ilat);
+ CSYNC();
+
+ printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
+ /* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
+ * local_irq_enable()
+ */
+ program_IAR();
+ /* Therefore it's better to setup IARs before interrupts enabled */
+ search_IAR();
+
+ /* Enable interrupts IVG7-15 */
+ irq_flags = irq_flags | IMASK_IVG15 |
+ IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
+
+ return 0;
+}
+
+#ifdef CONFIG_DO_IRQ_L1
+__attribute__((l1_text))
+#endif
+void do_irq(int vec, struct pt_regs *fp)
+{
+ if (vec == EVT_IVTMR_P) {
+ vec = IRQ_CORETMR;
+ } else {
+ struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
+ struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
+#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
+ unsigned long sic_status[3];
+
+ SSYNC();
+ sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
+ sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
+#ifdef CONFIG_BF54x
+ sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
+#endif
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ }
+ if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
+ break;
+ }
+#else
+ unsigned long sic_status;
+ SSYNC();
+ sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ } else if (sic_status & ivg->isrflag)
+ break;
+ }
+#endif
+ vec = ivg->irqno;
+ }
+ asm_do_IRQ(vec, fp);
+
+#ifdef CONFIG_KGDB
+ kgdb_process_breakpoint();
+#endif
+}
#define bfin_read_FIO_INEN() bfin_read_FIO0_INEN()
#define bfin_write_FIO_INEN(val) bfin_write_FIO0_INEN(val)
+
+#define SIC_IAR0 SICA_IAR0
+#define bfin_write_SIC_IMASK0 bfin_write_SICA_IMASK0
+#define bfin_write_SIC_IMASK1 bfin_write_SICA_IMASK1
+#define bfin_write_SIC_IWR0 bfin_write_SICA_IWR0
+#define bfin_write_SIC_IWR1 bfin_write_SICA_IWR1
+
+#define bfin_read_SIC_IMASK0 bfin_read_SICA_IMASK0
+#define bfin_read_SIC_IMASK1 bfin_read_SICA_IMASK1
+#define bfin_read_SIC_IWR0 bfin_read_SICA_IWR0
+#define bfin_read_SIC_IWR1 bfin_read_SICA_IWR1
+#define bfin_read_SIC_ISR0 bfin_read_SICA_ISR0
+#define bfin_read_SIC_ISR1 bfin_read_SICA_ISR1
+
+#define bfin_read_SIC_IMASK(x) bfin_read32(SICA_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val) bfin_write32((SICA_IMASK0 + (x << 2)), val)
+#define bfin_read_SIC_ISR(x) bfin_read32(SICA_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val) bfin_write32((SICA_ISR0 + (x << 2)), val)
+
+
#endif /* _MACH_BLACKFIN_H_ */
projects / openwrt / staging / blogic.git / commitdiff