Commit
62e04b7e0e3c ("sh_eth: rename 'sh_eth_cpu_data::hw_crc'") renamed
the field to 'hw_checksum' for the Ether DMAC "intelligent checksum",
however some Ether MACs implement a simpler checksumming scheme, so that
name now seems misleading. Rename that field to 'csmr' as the "intelligent
checksum" is always controlled by the CSMR register.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
sh_eth_write(ndev, 0, RDFFR);
/* Reset HW CRC register */
- if (mdp->cd->hw_checksum)
+ if (mdp->cd->csmr)
sh_eth_write(ndev, 0, CSMR);
/* Select MII mode */
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
- .hw_checksum = 1,
+ .csmr = 1,
.tsu = 1,
.no_tx_cntrs = 1,
};
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
- .hw_checksum = 1,
+ .csmr = 1,
.tsu = 1,
.select_mii = 1,
.magic = 1,
.no_trimd = 1,
.no_ade = 1,
.xdfar_rw = 1,
- .hw_checksum = 1,
+ .csmr = 1,
.select_mii = 1,
.magic = 1,
.cexcr = 1,
.no_ade = 1,
.xdfar_rw = 1,
.tsu = 1,
- .hw_checksum = 1,
+ .csmr = 1,
.select_mii = 1,
.magic = 1,
.cexcr = 1,
* the RFS bits are from bit 25 to bit 16. So, the
* driver needs right shifting by 16.
*/
- if (mdp->cd->hw_checksum)
+ if (mdp->cd->csmr)
desc_status >>= 16;
skb = mdp->rx_skbuff[entry];
add_reg(MAFCR);
if (cd->rtrate)
add_reg(RTRATE);
- if (cd->hw_checksum)
+ if (cd->csmr)
add_reg(CSMR);
if (cd->select_mii)
add_reg(RMII_MII);
unsigned no_ade:1; /* E-DMAC DOES NOT have ADE bit in EESR */
unsigned no_xdfar:1; /* E-DMAC DOES NOT have RDFAR/TDFAR */
unsigned xdfar_rw:1; /* E-DMAC has writeable RDFAR/TDFAR */
- unsigned hw_checksum:1; /* E-DMAC has CSMR */
+ unsigned csmr:1; /* E-DMAC has CSMR */
unsigned select_mii:1; /* EtherC has RMII_MII (MII select register) */
unsigned rmiimode:1; /* EtherC has RMIIMODE register */
unsigned rtrate:1; /* EtherC has RTRATE register */