comment "Kernel Modules"
-config BR2_PACKAGE_KMOD_DIAG
- tristate "Router LED/Button Driver"
- default y
- help
- Driver for the LEDs on Wireless Routers (diag)
-
config BR2_PACKAGE_KMOD_BRCM_WL
tristate "Broadcom Wireless Network Driver"
depends BR2_LINUX_2_4_BRCM
#############################################################
# broadcom specific kmod packages
-$(eval $(call KMOD_template,DIAG,diag,\
- $(MODULES_DIR)/kernel/drivers/net/diag/diag.o \
-))
$(eval $(call KMOD_template,BRCM_WL,brcm-wl,\
$(MODULES_DIR)/kernel/drivers/net/wl/wl.o \
,CONFIG_WL))
+++ /dev/null
---- linux-2.4.30/drivers/net/Makefile 2006-08-18 12:53:35.000000000 +0200
-+++ linux-2.4.30.new/drivers/net/Makefile 2006-08-18 12:53:49.000000000 +0200
-@@ -41,6 +41,8 @@
- obj-$(CONFIG_ISDN) += slhc.o
- endif
-
-+subdir-m += diag
-+
- subdir-$(CONFIG_HND) += hnd
- subdir-$(CONFIG_WL) += wl
- subdir-$(CONFIG_NET_PCMCIA) += pcmcia
-diff -urN linux-2.4.30/drivers/net/diag/diag_led.c linux-2.4.30.new/drivers/net/diag/diag_led.c
---- linux-2.4.30/drivers/net/diag/diag_led.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.new/drivers/net/diag/diag_led.c 2006-08-18 12:53:58.000000000 +0200
-@@ -0,0 +1,325 @@
-+/*
-+ * diag_led.c - replacement diag module
-+ *
-+ * Copyright (C) 2004-2006 Mike Baker,
-+ * Imre Kaloz <kaloz@dune.hu>,
-+ * Felix Fietkau <nbd@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ * $Id$
-+ */
-+
-+/*
-+ * ChangeLog:
-+ * 2004/03/28 initial release
-+ * 2004/08/26 asus & buffalo support added
-+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
-+ * 2005/04/13 added licensing informations
-+ * 2005/04/18 base reset polarity off initial readings
-+ * 2006/08/18 asus power led support added
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sysctl.h>
-+#include <asm/io.h>
-+#include <typedefs.h>
-+#include <bcmdevs.h>
-+#include <sbutils.h>
-+
-+extern char * nvram_get(const char *name);
-+static void *sbh;
-+
-+// v2.x - - - - -
-+#define BITS(n) ((1 << n) - 1)
-+#define ISSET(n,b) ((n & (1 << b)) ? 1 : 0)
-+#define DIAG_GPIO (1<<1)
-+#define AOSS_GPIO (1<<6)
-+#define DMZ_GPIO (1<<7)
-+#define SES_GPIO ((1 << 2) | (1 << 3) | (1 << 5))
-+
-+static void set_gpio(uint32 mask, uint32 value) {
-+ sb_gpiocontrol(sbh,mask,0);
-+ sb_gpioouten(sbh,mask,mask);
-+ sb_gpioout(sbh,mask,value);
-+}
-+
-+static void v2_set_diag(u8 state) {
-+ set_gpio(DIAG_GPIO,state);
-+}
-+static void v2_set_dmz(u8 state) {
-+ set_gpio(DMZ_GPIO,state);
-+}
-+static void v2_set_aoss(u8 state) {
-+ set_gpio(AOSS_GPIO,state);
-+}
-+static void v2_set_ses(u8 state) {
-+ set_gpio(SES_GPIO, (ISSET(state, 0) << 2) | (ISSET(state, 1) << 3) | (ISSET(state, 2) << 5));
-+}
-+// asus wl-500g (+deluxe)
-+#define ASUS_PWR_GPIO (1<<0)
-+
-+static void asus_set_pwr(u8 state) {
-+ set_gpio(ASUS_PWR_GPIO,state);
-+}
-+
-+// v1.x - - - - -
-+#define LED_DIAG 0x13
-+#define LED_DMZ 0x12
-+
-+static void v1_set_diag(u8 state) {
-+ if (!state) {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-+ } else {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-+ }
-+}
-+static void v1_set_dmz(u8 state) {
-+ if (!state) {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-+ } else {
-+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-+ }
-+}
-+
-+// - - - - -
-+static void ignore(u8 ignored) {};
-+
-+// - - - - -
-+#define BIT_DMZ (1 << 0)
-+#define BIT_DIAG (1 << 2)
-+#define BIT_SES (BITS(3) << 3)
-+#define BIT_PWR (1 << 1)
-+
-+void (*set_diag)(u8 state);
-+void (*set_dmz)(u8 state);
-+void (*set_ses)(u8 state);
-+void (*set_pwr)(u8 state);
-+
-+static unsigned int diag_reverse = 1;
-+static unsigned int ses_reverse = 1;
-+static unsigned int pwr_reverse = 1;
-+static unsigned int diag = BIT_PWR; // default: diag off, pwr on, dmz off
-+
-+static void diag_change()
-+{
-+ set_diag(diag_reverse ? 0xFF : 0x00); // off
-+ set_dmz(diag_reverse ? 0xFF : 0x00); // off
-+ set_ses(ses_reverse ? 0xFF : 0x00); // off
-+ set_pwr(pwr_reverse ? 0xFF : 0x00); //off
-+
-+ if(diag & BIT_DIAG)
-+ set_diag(diag_reverse ? 0x00 : 0xFF); // on
-+ if(diag & BIT_DMZ)
-+ set_dmz(diag_reverse ? 0x00 : 0xFF); // on
-+ if(diag & BIT_SES)
-+ set_ses(((ses_reverse ? ~diag : diag) >> 3) & BITS(3));
-+ if (diag & BIT_PWR)
-+ set_pwr(pwr_reverse ? 0x00 : 0xFF); // on
-+}
-+
-+static int proc_diag(ctl_table *table, int write, struct file *filp,
-+ void *buffer, size_t *lenp)
-+{
-+ int r;
-+ r = proc_dointvec(table, write, filp, buffer, lenp);
-+ if (write && !r) {
-+ diag_change();
-+ }
-+ return r;
-+}
-+
-+// - - - - -
-+static unsigned char reset_gpio = 0;
-+static unsigned char reset_polarity = 0;
-+static unsigned int reset = 0;
-+static unsigned char button_gpio = 0;
-+static unsigned char button_polarity = 0;
-+static unsigned int button = 0;
-+
-+
-+static int read_gpio(int gpio, int polarity)
-+{
-+ int res;
-+
-+ if (gpio) {
-+ sb_gpiocontrol(sbh,gpio,gpio);
-+ sb_gpioouten(sbh,gpio,0);
-+ res=!(sb_gpioin(sbh)&gpio);
-+
-+ return (polarity ? !res : res);
-+ }
-+
-+ return 0;
-+}
-+
-+static int proc_reset(ctl_table *table, int write, struct file *filp,
-+ void *buffer, size_t *lenp)
-+{
-+ reset = read_gpio(reset_gpio, reset_polarity);
-+
-+ return proc_dointvec(table, write, filp, buffer, lenp);
-+}
-+
-+static int proc_button(ctl_table *table, int write, struct file *filp,
-+ void *buffer, size_t *lenp)
-+{
-+ button = read_gpio(button_gpio, button_polarity);
-+
-+ return proc_dointvec(table, write, filp, buffer, lenp);
-+}
-+
-+// - - - - -
-+static struct ctl_table_header *diag_sysctl_header;
-+
-+static ctl_table sys_diag[] = {
-+ {
-+ ctl_name: 2000,
-+ procname: "diag",
-+ data: &diag,
-+ maxlen: sizeof(diag),
-+ mode: 0644,
-+ proc_handler: proc_diag
-+ },
-+ {
-+ ctl_name: 2001,
-+ procname: "reset",
-+ data: &reset,
-+ maxlen: sizeof(reset),
-+ mode: 0444,
-+ proc_handler: proc_reset
-+ },
-+ {
-+ ctl_name: 2002,
-+ procname: "button",
-+ data: &button,
-+ maxlen: sizeof(button),
-+ mode: 0444,
-+ proc_handler: proc_button
-+ },
-+ { 0 }
-+};
-+
-+static int __init diag_init()
-+{
-+ char *buf;
-+ u32 board_type;
-+ sbh = sb_kattach();
-+ sb_gpiosetcore(sbh);
-+
-+ board_type = sb_boardtype(sbh);
-+ printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-+
-+ set_diag=ignore;
-+ set_dmz=ignore;
-+ set_ses=ignore;
-+ set_pwr=ignore;
-+
-+ buf=nvram_get("pmon_ver") ?: "";
-+ if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
-+ buf=nvram_get("boardtype")?:"";
-+ if (!strcmp(buf,"bcm94710dev")) {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ // wrt54g v1.x
-+ set_diag=v1_set_diag;
-+ set_dmz=v1_set_dmz;
-+ reset_gpio=(1<<6);
-+ }
-+ if (!strcmp(buf,"asusX")) {
-+ //asus wl-500g
-+ set_pwr=asus_set_pwr;
-+ reset_gpio=(1<<6);
-+ }
-+ }
-+ if (!strcmp(buf,"bcm94710ap")) {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ // buffalo
-+ set_dmz=v2_set_dmz;
-+ reset_gpio=(1<<4);
-+ }
-+ if (!strcmp(buf,"44")) {
-+ //dell truemobile
-+ set_dmz=v2_set_dmz;
-+ reset_gpio=(1<<0);
-+ }
-+ }
-+ } else {
-+ buf=nvram_get("boardnum")?:"";
-+ if (!strcmp(buf,"42")) {
-+ //linksys
-+ set_diag=v2_set_diag;
-+ set_dmz=v2_set_dmz;
-+ set_ses=v2_set_ses;
-+
-+ reset_gpio=(1<<6);
-+ button_gpio=(1<<4);
-+
-+ if (!strcmp((nvram_get("boardtype")?:""), "0x0101")) // WRT54G3G
-+ ses_reverse = 0;
-+ else
-+ ses_reverse = 1;
-+ }
-+ if (!strcmp(buf,"44")) {
-+ //motorola
-+ reset_gpio=(1<<5);
-+ }
-+ if (!strcmp(buf,"00")) {
-+ //buffalo
-+ diag_reverse = 0;
-+ set_dmz=v2_set_diag;
-+ set_diag=v2_set_aoss;
-+ reset_gpio=(1<<7);
-+ }
-+ if (!strcmp(buf,"45")) {
-+ //wl-500g deluxe
-+ set_pwr=asus_set_pwr;
-+ reset_gpio=(1<<6);
-+ }
-+ }
-+
-+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-+ sb_gpioouten(sbh,reset_gpio,0);
-+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-+
-+ if (button_gpio) {
-+ sb_gpiocontrol(sbh,button_gpio,button_gpio);
-+ sb_gpioouten(sbh,button_gpio,0);
-+ button_polarity=!(sb_gpioin(sbh)&button_gpio);
-+ } else {
-+ // don't create /proc/button
-+ sys_diag[2].ctl_name = 0;
-+ }
-+
-+ diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-+ diag_change();
-+
-+ return 0;
-+}
-+
-+static void __exit diag_exit()
-+{
-+ unregister_sysctl_table(diag_sysctl_header);
-+}
-+
-+EXPORT_NO_SYMBOLS;
-+MODULE_AUTHOR("openwrt.org");
-+MODULE_LICENSE("GPL");
-+
-+module_init(diag_init);
-+module_exit(diag_exit);
-diff -urN linux-2.4.30/drivers/net/diag/Makefile linux-2.4.30.new/drivers/net/diag/Makefile
---- linux-2.4.30/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.4.30.new/drivers/net/diag/Makefile 2006-08-18 12:53:49.000000000 +0200
-@@ -0,0 +1,13 @@
-+#$Id$
-+
-+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
-+
-+O_TARGET := diag.o
-+
-+MAC_OBJS := diag_led.o
-+
-+export-objs :=
-+obj-y := $(MAC_OBJS)
-+obj-m := $(O_TARGET)
-+
-+include $(TOPDIR)/Rules.make
+source "target/linux/package/diag/Config.in"
source "target/linux/package/wlcompat/Config.in"
source "target/linux/package/madwifi/Config.in"
source "target/linux/package/mini_fo/Config.in"
# Main makefile for the packages
include $(TOPDIR)/rules.mk
+package-$(BR2_PACKAGE_KMOD_DIAG) += diag
package-$(BR2_PACKAGE_KMOD_FUSE) += fuse
package-$(BR2_PACKAGE_KMOD_SHFS) += shfs
package-$(BR2_PACKAGE_KMOD_SWITCH) += switch
--- /dev/null
+config BR2_PACKAGE_KMOD_DIAG
+ prompt "kmod-diag - kernel driver for LEDs and buttons"
+ tristate
+ default y
+ help
+ Kernel driver for LEDs and buttons.
+
+ http://www.openwrt.org
+
--- /dev/null
+# $Id$
+
+include $(TOPDIR)/rules.mk
+include ../../rules.mk
+
+PKG_NAME := kmod-diag
+PKG_RELEASE := 5
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+include $(TOPDIR)/package/rules.mk
+
+$(eval $(call PKG_template,KMOD_DIAG,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE))))
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir -p $(PKG_BUILD_DIR)
+ cp -fpR ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+$(PKG_BUILD_DIR)/.configured:
+ touch $@
+
+$(PKG_BUILD_DIR)/.built:
+ $(MAKE) -C "$(KERNEL_DIR)" \
+ CROSS_COMPILE="$(TARGET_CROSS)" \
+ ARCH="$(LINUX_KARCH)" \
+ PATH="$(TARGET_PATH)" \
+ SUBDIRS="$(PKG_BUILD_DIR)" \
+ modules
+ touch $@
+
+$(IPKG_KMOD_DIAG):
+ install -m0755 -d $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)
+ cp -fpR $(PKG_BUILD_DIR)/diag.o \
+ $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)
+ $(IPKG_BUILD) $(IDIR_KMOD_DIAG) $(PACKAGE_DIR)
+
--- /dev/null
+Package: kmod-diag
+Priority: optional
+Section: sys
+Description: Kernel modules for LEDs and buttons
--- /dev/null
+#$Id: 005-diag_led.patch 4594 2006-08-18 13:10:19Z florian $
+
+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
+
+O_TARGET := diag.o
+
+MAC_OBJS := diag_led.o
+
+export-objs :=
+obj-y := $(MAC_OBJS)
+obj-m := $(O_TARGET)
+
+include $(TOPDIR)/Rules.make
--- /dev/null
+/*
+ * diag_led.c - replacement diag module
+ *
+ * Copyright (C) 2004-2006 Mike Baker,
+ * Imre Kaloz <kaloz@dune.hu>,
+ * Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * $Id: 005-diag_led.patch 4594 2006-08-18 13:10:19Z florian $
+ */
+
+/*
+ * ChangeLog:
+ * 2004/03/28 initial release
+ * 2004/08/26 asus & buffalo support added
+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
+ * 2005/04/13 added licensing informations
+ * 2005/04/18 base reset polarity off initial readings
+ * 2006/08/18 asus power led support added
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysctl.h>
+#include <asm/io.h>
+#include <typedefs.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+
+extern char * nvram_get(const char *name);
+static void *sbh;
+
+// v2.x - - - - -
+#define BITS(n) ((1 << n) - 1)
+#define ISSET(n,b) ((n & (1 << b)) ? 1 : 0)
+#define DIAG_GPIO (1<<1)
+#define AOSS_GPIO (1<<6)
+#define DMZ_GPIO (1<<7)
+#define SES_GPIO ((1 << 2) | (1 << 3) | (1 << 5))
+
+static void set_gpio(uint32 mask, uint32 value) {
+ sb_gpiocontrol(sbh,mask,0);
+ sb_gpioouten(sbh,mask,mask);
+ sb_gpioout(sbh,mask,value);
+}
+
+static void v2_set_diag(u8 state) {
+ set_gpio(DIAG_GPIO,state);
+}
+static void v2_set_dmz(u8 state) {
+ set_gpio(DMZ_GPIO,state);
+}
+static void v2_set_aoss(u8 state) {
+ set_gpio(AOSS_GPIO,state);
+}
+static void v2_set_ses(u8 state) {
+ set_gpio(SES_GPIO, (ISSET(state, 0) << 2) | (ISSET(state, 1) << 3) | (ISSET(state, 2) << 5));
+}
+// asus wl-500g (+deluxe)
+#define WL500G_PWR_GPIO (1<<0)
+// asus wl-500g premium
+#define WL500GP_PWR_GPIO (1<<1)
+
+static void wl500g_set_pwr(u8 state) {
+ set_gpio(WL500G_PWR_GPIO,state);
+}
+
+static void wl500gp_set_pwr(u8 state) {
+ set_gpio(WL500GP_PWR_GPIO,state);
+}
+
+// v1.x - - - - -
+#define LED_DIAG 0x13
+#define LED_DMZ 0x12
+
+static void v1_set_diag(u8 state) {
+ if (!state) {
+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
+ } else {
+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
+ }
+}
+static void v1_set_dmz(u8 state) {
+ if (!state) {
+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
+ } else {
+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
+ }
+}
+
+// - - - - -
+static void ignore(u8 ignored) {};
+
+// - - - - -
+#define BIT_DMZ (1 << 0)
+#define BIT_DIAG (1 << 2)
+#define BIT_SES (BITS(3) << 3)
+#define BIT_PWR (1 << 1)
+
+void (*set_diag)(u8 state);
+void (*set_dmz)(u8 state);
+void (*set_ses)(u8 state);
+void (*set_pwr)(u8 state);
+
+static unsigned int diag_reverse = 1;
+static unsigned int ses_reverse = 1;
+static unsigned int pwr_reverse = 1;
+static unsigned int diag = BIT_PWR; // default: diag off, pwr on, dmz off
+
+static void diag_change()
+{
+ set_diag(diag_reverse ? 0xFF : 0x00); // off
+ set_dmz(diag_reverse ? 0xFF : 0x00); // off
+ set_ses(ses_reverse ? 0xFF : 0x00); // off
+ set_pwr(pwr_reverse ? 0xFF : 0x00); //off
+
+ if(diag & BIT_DIAG)
+ set_diag(diag_reverse ? 0x00 : 0xFF); // on
+ if(diag & BIT_DMZ)
+ set_dmz(diag_reverse ? 0x00 : 0xFF); // on
+ if(diag & BIT_SES)
+ set_ses(((ses_reverse ? ~diag : diag) >> 3) & BITS(3));
+ if (diag & BIT_PWR)
+ set_pwr(pwr_reverse ? 0x00 : 0xFF); // on
+}
+
+static int proc_diag(ctl_table *table, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ int r;
+ r = proc_dointvec(table, write, filp, buffer, lenp);
+ if (write && !r) {
+ diag_change();
+ }
+ return r;
+}
+
+// - - - - -
+static unsigned char reset_gpio = 0;
+static unsigned char reset_polarity = 0;
+static unsigned int reset = 0;
+static unsigned char button_gpio = 0;
+static unsigned char button_polarity = 0;
+static unsigned int button = 0;
+
+
+static int read_gpio(int gpio, int polarity)
+{
+ int res;
+
+ if (gpio) {
+ sb_gpiocontrol(sbh,gpio,gpio);
+ sb_gpioouten(sbh,gpio,0);
+ res=!(sb_gpioin(sbh)&gpio);
+
+ return (polarity ? !res : res);
+ }
+
+ return 0;
+}
+
+static int proc_reset(ctl_table *table, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ reset = read_gpio(reset_gpio, reset_polarity);
+
+ return proc_dointvec(table, write, filp, buffer, lenp);
+}
+
+static int proc_button(ctl_table *table, int write, struct file *filp,
+ void *buffer, size_t *lenp)
+{
+ button = read_gpio(button_gpio, button_polarity);
+
+ return proc_dointvec(table, write, filp, buffer, lenp);
+}
+
+// - - - - -
+static struct ctl_table_header *diag_sysctl_header;
+
+static ctl_table sys_diag[] = {
+ {
+ ctl_name: 2000,
+ procname: "diag",
+ data: &diag,
+ maxlen: sizeof(diag),
+ mode: 0644,
+ proc_handler: proc_diag
+ },
+ {
+ ctl_name: 2001,
+ procname: "reset",
+ data: &reset,
+ maxlen: sizeof(reset),
+ mode: 0444,
+ proc_handler: proc_reset
+ },
+ {
+ ctl_name: 2002,
+ procname: "button",
+ data: &button,
+ maxlen: sizeof(button),
+ mode: 0444,
+ proc_handler: proc_button
+ },
+ { 0 }
+};
+
+static int __init diag_init()
+{
+ char *buf;
+ u32 board_type;
+ sbh = sb_kattach();
+ sb_gpiosetcore(sbh);
+
+ board_type = sb_boardtype(sbh);
+ printk(KERN_INFO "diag boardtype: %08x\n",board_type);
+
+ set_diag=ignore;
+ set_dmz=ignore;
+ set_ses=ignore;
+ set_pwr=ignore;
+
+ buf=nvram_get("pmon_ver") ?: "";
+ if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
+ buf=nvram_get("boardtype")?:"";
+ if (!strcmp(buf,"bcm94710dev")) {
+ buf=nvram_get("boardnum")?:"";
+ if (!strcmp(buf,"42")) {
+ // wrt54g v1.x
+ set_diag=v1_set_diag;
+ set_dmz=v1_set_dmz;
+ reset_gpio=(1<<6);
+ }
+ if (!strcmp(buf,"asusX")) {
+ //asus wl-500g
+ set_pwr=wl500g_set_pwr;
+ reset_gpio=(1<<6);
+ }
+ }
+ if (!strcmp(buf,"bcm94710ap")) {
+ buf=nvram_get("boardnum")?:"";
+ if (!strcmp(buf,"42")) {
+ // buffalo
+ set_dmz=v2_set_dmz;
+ reset_gpio=(1<<4);
+ }
+ if (!strcmp(buf,"44")) {
+ //dell truemobile
+ set_dmz=v2_set_dmz;
+ reset_gpio=(1<<0);
+ }
+ }
+ } else {
+ buf=nvram_get("boardnum")?:"";
+ if (!strcmp(buf,"42")) {
+ //linksys
+ set_diag=v2_set_diag;
+ set_dmz=v2_set_dmz;
+ set_ses=v2_set_ses;
+
+ reset_gpio=(1<<6);
+ button_gpio=(1<<4);
+
+ if (!strcmp((nvram_get("boardtype")?:""), "0x0101")) // WRT54G3G
+ ses_reverse = 0;
+ else
+ ses_reverse = 1;
+ }
+ if (!strcmp(buf,"44")) {
+ //motorola
+ reset_gpio=(1<<5);
+ }
+ if (!strcmp(buf,"00")) {
+ //buffalo
+ diag_reverse = 0;
+ set_dmz=v2_set_diag;
+ set_diag=v2_set_aoss;
+ reset_gpio=(1<<7);
+ }
+ if (!strcmp(buf,"45")) { /* ASUS */
+ buf=nvram_get("boardtype")?:"";
+ if (!strcmp(buf,"0x042f")) {
+ //wl-500g premium
+ button_gpio=(1<<4);
+ reset_gpio=(1<<0);
+ set_pwr=wl500gp_set_pwr;
+ pwr_reverse = 0;
+ } else {
+ //wl-500g deluxe
+ set_pwr=wl500g_set_pwr;
+ reset_gpio=(1<<6);
+ }
+ }
+ }
+
+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
+ sb_gpioouten(sbh,reset_gpio,0);
+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
+
+ if (button_gpio) {
+ sb_gpiocontrol(sbh,button_gpio,button_gpio);
+ sb_gpioouten(sbh,button_gpio,0);
+ button_polarity=!(sb_gpioin(sbh)&button_gpio);
+ } else {
+ // don't create /proc/button
+ sys_diag[2].ctl_name = 0;
+ }
+
+ diag_sysctl_header = register_sysctl_table(sys_diag, 0);
+ diag_change();
+
+ return 0;
+}
+
+static void __exit diag_exit()
+{
+ unregister_sysctl_table(diag_sysctl_header);
+}
+
+EXPORT_NO_SYMBOLS;
+MODULE_AUTHOR("openwrt.org");
+MODULE_LICENSE("GPL");
+
+module_init(diag_init);
+module_exit(diag_exit);
projects / openwrt / svn-archive / openwrt.git / commitdiff