obj-y += cpu_info.o
obj-y += dram_helpers.o
obj-y += pinmux.o
-obj-y += usbc.o
+obj-y += usb_phy.o
obj-$(CONFIG_MACH_SUN6I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
--- /dev/null
+/*
+ * Sunxi usb-phy code
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/usb_phy.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <errno.h>
+#ifdef CONFIG_AXP152_POWER
+#include <axp152.h>
+#endif
+#ifdef CONFIG_AXP209_POWER
+#include <axp209.h>
+#endif
+#ifdef CONFIG_AXP221_POWER
+#include <axp221.h>
+#endif
+
+#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
+#ifdef CONFIG_MACH_SUN8I_A33
+#define SUNXI_USB_CSR 0x410
+#else
+#define SUNXI_USB_CSR 0x404
+#endif
+#define SUNXI_USB_PASSBY_EN 1
+
+#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
+#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
+#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
+#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
+
+static struct sunxi_usb_phy {
+ int usb_rst_mask;
+ int gpio_vbus;
+ int gpio_vbus_det;
+ int id;
+} sunxi_usb_phy[] = {
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
+ .id = 0,
+ },
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
+ .id = 1,
+ },
+#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
+ {
+ .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
+ .id = 2,
+ }
+#endif
+};
+
+static int sunxi_usb_phy_enabled_count;
+
+static int get_vbus_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
+ case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
+ case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
+ }
+ return -EINVAL;
+}
+
+static int get_vbus_detect_gpio(int index)
+{
+ switch (index) {
+ case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
+ }
+ return -EINVAL;
+}
+
+static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
+ int data, int len)
+{
+ int j = 0, usbc_bit = 0;
+ void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
+
+#ifdef CONFIG_MACH_SUN8I_A33
+ /* CSR needs to be explicitly initialized to 0 on A33 */
+ writel(0, dest);
+#endif
+
+ usbc_bit = 1 << (phy->id * 2);
+ for (j = 0; j < len; j++) {
+ /* set the bit address to be written */
+ clrbits_le32(dest, 0xff << 8);
+ setbits_le32(dest, (addr + j) << 8);
+
+ clrbits_le32(dest, usbc_bit);
+ /* set data bit */
+ if (data & 0x1)
+ setbits_le32(dest, 1 << 7);
+ else
+ clrbits_le32(dest, 1 << 7);
+
+ setbits_le32(dest, usbc_bit);
+
+ clrbits_le32(dest, usbc_bit);
+
+ data >>= 1;
+ }
+}
+
+static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
+{
+ /* The following comments are machine
+ * translated from Chinese, you have been warned!
+ */
+
+ /* Regulation 45 ohms */
+ if (phy->id == 0)
+ usb_phy_write(phy, 0x0c, 0x01, 1);
+
+ /* adjust PHY's magnitude and rate */
+ usb_phy_write(phy, 0x20, 0x14, 5);
+
+ /* threshold adjustment disconnect */
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
+ usb_phy_write(phy, 0x2a, 3, 2);
+#else
+ usb_phy_write(phy, 0x2a, 2, 2);
+#endif
+
+ return;
+}
+
+static void sunxi_usb_phy_passby(int index, int enable)
+{
+ unsigned long bits = 0;
+ void *addr;
+
+ if (index == 1)
+ addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+ else
+ addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
+
+ bits = SUNXI_EHCI_AHB_ICHR8_EN |
+ SUNXI_EHCI_AHB_INCR4_BURST_EN |
+ SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
+ SUNXI_EHCI_ULPI_BYPASS_EN;
+
+ if (enable)
+ setbits_le32(addr, bits);
+ else
+ clrbits_le32(addr, bits);
+
+ return;
+}
+
+void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
+}
+
+int sunxi_usb_phy_probe(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ int ret = 0;
+
+ phy->gpio_vbus = get_vbus_gpio(index);
+ if (phy->gpio_vbus >= 0) {
+ ret |= gpio_request(phy->gpio_vbus, "usbc_vbus");
+ ret |= gpio_direction_output(phy->gpio_vbus, 0);
+ }
+
+ phy->gpio_vbus_det = get_vbus_detect_gpio(index);
+ if (phy->gpio_vbus_det >= 0) {
+ ret |= gpio_request(phy->gpio_vbus_det, "usbc_vbus_det");
+ ret |= gpio_direction_input(phy->gpio_vbus_det);
+ }
+
+ return ret;
+}
+
+int sunxi_usb_phy_remove(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ int ret = 0;
+
+ if (phy->gpio_vbus >= 0)
+ ret |= gpio_free(phy->gpio_vbus);
+
+ if (phy->gpio_vbus_det >= 0)
+ ret |= gpio_free(phy->gpio_vbus_det);
+
+ return ret;
+}
+
+void sunxi_usb_phy_init(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ /* enable common PHY only once */
+ if (sunxi_usb_phy_enabled_count == 0)
+ setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+
+ sunxi_usb_phy_config(phy);
+
+ if (phy->id != 0)
+ sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
+
+ sunxi_usb_phy_enabled_count++;
+}
+
+void sunxi_usb_phy_exit(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+ if (phy->id != 0)
+ sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
+
+ clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
+
+ /* disable common PHY only once, for the last enabled phy */
+ if (sunxi_usb_phy_enabled_count == 1)
+ clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
+
+ sunxi_usb_phy_enabled_count--;
+}
+
+void sunxi_usb_phy_power_on(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ if (phy->gpio_vbus >= 0)
+ gpio_set_value(phy->gpio_vbus, 1);
+}
+
+void sunxi_usb_phy_power_off(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+ if (phy->gpio_vbus >= 0)
+ gpio_set_value(phy->gpio_vbus, 0);
+}
+
+int sunxi_usb_phy_vbus_detect(int index)
+{
+ struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+ int err, retries = 3;
+
+ if (phy->gpio_vbus_det < 0) {
+ eprintf("Error: invalid vbus detection pin\n");
+ return phy->gpio_vbus_det;
+ }
+
+ err = gpio_get_value(phy->gpio_vbus_det);
+ /*
+ * Vbus may have been provided by the board and just been turned of
+ * some milliseconds ago on reset, what we're measuring then is a
+ * residual charge on Vbus, sleep a bit and try again.
+ */
+ while (err > 0 && retries--) {
+ mdelay(100);
+ err = gpio_get_value(phy->gpio_vbus_det);
+ }
+
+ return err;
+}
+++ /dev/null
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/usbc.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <errno.h>
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
-
-#define SUNXI_USB_PMU_IRQ_ENABLE 0x800
-#ifdef CONFIG_MACH_SUN8I_A33
-#define SUNXI_USB_CSR 0x410
-#else
-#define SUNXI_USB_CSR 0x404
-#endif
-#define SUNXI_USB_PASSBY_EN 1
-
-#define SUNXI_EHCI_AHB_ICHR8_EN (1 << 10)
-#define SUNXI_EHCI_AHB_INCR4_BURST_EN (1 << 9)
-#define SUNXI_EHCI_AHB_INCRX_ALIGN_EN (1 << 8)
-#define SUNXI_EHCI_ULPI_BYPASS_EN (1 << 0)
-
-static struct sunxi_usb_phy {
- int usb_rst_mask;
- int gpio_vbus;
- int gpio_vbus_det;
- int id;
-} sunxi_usb_phy[] = {
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY0_RST | CCM_USB_CTRL_PHY0_CLK,
- .id = 0,
- },
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY1_RST | CCM_USB_CTRL_PHY1_CLK,
- .id = 1,
- },
-#if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1)
- {
- .usb_rst_mask = CCM_USB_CTRL_PHY2_RST | CCM_USB_CTRL_PHY2_CLK,
- .id = 2,
- }
-#endif
-};
-
-static int sunxi_usb_phy_enabled_count;
-
-static int get_vbus_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_PIN);
- case 1: return sunxi_name_to_gpio(CONFIG_USB1_VBUS_PIN);
- case 2: return sunxi_name_to_gpio(CONFIG_USB2_VBUS_PIN);
- }
- return -EINVAL;
-}
-
-static int get_vbus_detect_gpio(int index)
-{
- switch (index) {
- case 0: return sunxi_name_to_gpio(CONFIG_USB0_VBUS_DET);
- }
- return -EINVAL;
-}
-
-static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
- int data, int len)
-{
- int j = 0, usbc_bit = 0;
- void *dest = (void *)SUNXI_USB0_BASE + SUNXI_USB_CSR;
-
-#ifdef CONFIG_MACH_SUN8I_A33
- /* CSR needs to be explicitly initialized to 0 on A33 */
- writel(0, dest);
-#endif
-
- usbc_bit = 1 << (phy->id * 2);
- for (j = 0; j < len; j++) {
- /* set the bit address to be written */
- clrbits_le32(dest, 0xff << 8);
- setbits_le32(dest, (addr + j) << 8);
-
- clrbits_le32(dest, usbc_bit);
- /* set data bit */
- if (data & 0x1)
- setbits_le32(dest, 1 << 7);
- else
- clrbits_le32(dest, 1 << 7);
-
- setbits_le32(dest, usbc_bit);
-
- clrbits_le32(dest, usbc_bit);
-
- data >>= 1;
- }
-}
-
-static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
-{
- /* The following comments are machine
- * translated from Chinese, you have been warned!
- */
-
- /* Regulation 45 ohms */
- if (phy->id == 0)
- usb_phy_write(phy, 0x0c, 0x01, 1);
-
- /* adjust PHY's magnitude and rate */
- usb_phy_write(phy, 0x20, 0x14, 5);
-
- /* threshold adjustment disconnect */
-#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN6I
- usb_phy_write(phy, 0x2a, 3, 2);
-#else
- usb_phy_write(phy, 0x2a, 2, 2);
-#endif
-
- return;
-}
-
-static void sunxi_usb_phy_passby(int index, int enable)
-{
- unsigned long bits = 0;
- void *addr;
-
- if (index == 1)
- addr = (void *)SUNXI_USB1_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
- else
- addr = (void *)SUNXI_USB2_BASE + SUNXI_USB_PMU_IRQ_ENABLE;
-
- bits = SUNXI_EHCI_AHB_ICHR8_EN |
- SUNXI_EHCI_AHB_INCR4_BURST_EN |
- SUNXI_EHCI_AHB_INCRX_ALIGN_EN |
- SUNXI_EHCI_ULPI_BYPASS_EN;
-
- if (enable)
- setbits_le32(addr, bits);
- else
- clrbits_le32(addr, bits);
-
- return;
-}
-
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- usb_phy_write(phy, 0x3c, enable ? 0 : 2, 2);
-}
-
-int sunxi_usb_phy_probe(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int ret = 0;
-
- phy->gpio_vbus = get_vbus_gpio(index);
- if (phy->gpio_vbus >= 0) {
- ret |= gpio_request(phy->gpio_vbus, "usbc_vbus");
- ret |= gpio_direction_output(phy->gpio_vbus, 0);
- }
-
- phy->gpio_vbus_det = get_vbus_detect_gpio(index);
- if (phy->gpio_vbus_det >= 0) {
- ret |= gpio_request(phy->gpio_vbus_det, "usbc_vbus_det");
- ret |= gpio_direction_input(phy->gpio_vbus_det);
- }
-
- return ret;
-}
-
-int sunxi_usb_phy_remove(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int ret = 0;
-
- if (phy->gpio_vbus >= 0)
- ret |= gpio_free(phy->gpio_vbus);
-
- if (phy->gpio_vbus_det >= 0)
- ret |= gpio_free(phy->gpio_vbus_det);
-
- return ret;
-}
-
-void sunxi_usb_phy_init(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- /* enable common PHY only once */
- if (sunxi_usb_phy_enabled_count == 0)
- setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- setbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-
- sunxi_usb_phy_config(phy);
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(index, SUNXI_USB_PASSBY_EN);
-
- sunxi_usb_phy_enabled_count++;
-}
-
-void sunxi_usb_phy_exit(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-
- if (phy->id != 0)
- sunxi_usb_phy_passby(index, !SUNXI_USB_PASSBY_EN);
-
- clrbits_le32(&ccm->usb_clk_cfg, phy->usb_rst_mask);
-
- /* disable common PHY only once, for the last enabled phy */
- if (sunxi_usb_phy_enabled_count == 1)
- clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-
- sunxi_usb_phy_enabled_count--;
-}
-
-void sunxi_usb_phy_power_on(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 1);
-}
-
-void sunxi_usb_phy_power_off(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
-
- if (phy->gpio_vbus >= 0)
- gpio_set_value(phy->gpio_vbus, 0);
-}
-
-int sunxi_usb_phy_vbus_detect(int index)
-{
- struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
- int err, retries = 3;
-
- if (phy->gpio_vbus_det < 0) {
- eprintf("Error: invalid vbus detection pin\n");
- return phy->gpio_vbus_det;
- }
-
- err = gpio_get_value(phy->gpio_vbus_det);
- /*
- * Vbus may have been provided by the board and just been turned of
- * some milliseconds ago on reset, what we're measuring then is a
- * residual charge on Vbus, sleep a bit and try again.
- */
- while (err > 0 && retries--) {
- mdelay(100);
- err = gpio_get_value(phy->gpio_vbus_det);
- }
-
- return err;
-}
--- /dev/null
+/*
+ * Sunxi usb-phy code
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+int sunxi_usb_phy_probe(int index);
+int sunxi_usb_phy_remove(int index);
+void sunxi_usb_phy_init(int index);
+void sunxi_usb_phy_exit(int index);
+void sunxi_usb_phy_power_on(int index);
+void sunxi_usb_phy_power_off(int index);
+int sunxi_usb_phy_vbus_detect(int index);
+void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
+++ /dev/null
-/*
- * Sunxi usb-phy code
- *
- * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
- * Copyright (C) 2014 Roman Byshko <rbyshko@gmail.com>
- *
- * Based on code from
- * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-int sunxi_usb_phy_probe(int index);
-int sunxi_usb_phy_remove(int index);
-void sunxi_usb_phy_init(int index);
-void sunxi_usb_phy_exit(int index);
-void sunxi_usb_phy_power_on(int index);
-void sunxi_usb_phy_power_off(int index);
-int sunxi_usb_phy_vbus_detect(int index);
-void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
#include <asm/arch/dram.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <linux/usb/musb.h>
#include <common.h>
#include <asm/arch/clock.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
#include <asm/io.h>
#include "ehci.h"
#include <common.h>
#include <watchdog.h>
#ifdef CONFIG_ARCH_SUNXI
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
#endif
#include <asm/errno.h>
#include <linux/usb/ch9.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/usbc.h>
+#include <asm/arch/usb_phy.h>
#include <asm-generic/gpio.h>
#include "linux-compat.h"
#include "musb_core.h"