Regulator support was enabled on all subtargets except for ath79-nand.
With Kernel 5.10, AT803x requires Regulator support, thus enabling on
the complete target, as ath79-nand requires AT803x.
While this is only required on Kernel 5.10, enable it also on 5.4. We
have no major size-constraint, so enabling it on 5.4 allows us to clean
up the occurences in the subtarget configuration.
Signed-off-by: David Bauer <mail@david-bauer.net>
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_CONTROLLER=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_RATIONAL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
CONFIG_RESET_ATH79=y
CONFIG_RESET_CONTROLLER=y
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_MTD_SPLIT_EVA_FW=y
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_PCI_AR71XX=y
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_SPI_RB4XX=y
CONFIG_UBIFS_FS=y
CONFIG_PHYLINK=y
CONFIG_PHY_AR7100_USB=y
CONFIG_PHY_AR7200_USB=y
-CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y