+++ /dev/null
-From b8afc254b40167fd37b4d4263e750dab1f9ef157 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Wed, 9 Sep 2020 18:38:31 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes
-
-Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI.
-
-Signed-off-by: John Crispin <john@phrozen.org>
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Reviewed-by: Vinod Koul <vkoul@kernel.org>
-Link: https://lore.kernel.org/r/20200909163831.1894142-1-robert.marko@sartura.hr
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
- 1 file changed, 74 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -605,5 +605,79 @@
- reg = <4>;
- };
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ compatible = "qcom,usb-ss-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0x9a000 0x800>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+ reset-names = "por_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0xa6000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ compatible = "qcom,dwc3";
-+ reg = <0x8af8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
-+ <&gcc GCC_USB3_SLEEP_CLK>,
-+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@8a00000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x8a00000 0xf8000>;
-+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ };
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0xa8000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ compatible = "qcom,dwc3";
-+ reg = <0x60f8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
-+ <&gcc GCC_USB2_SLEEP_CLK>,
-+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@6000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x6000000 0xf8000>;
-+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_hs_phy>;
-+ phy-names = "usb2-phy";
-+ dr_mode = "host";
-+ };
-+ };
- };
- };
+++ /dev/null
-From d1ae4c808e7802008225078d93fbadd4aeea1e2d Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Wed, 9 Sep 2020 21:56:37 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: add more labels
-
-Lets add labels to more commonly used nodes for easier modification in board DTS files.
-
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Link: https://lore.kernel.org/r/20200909195640.3127341-2-robert.marko@sartura.hr
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -190,7 +190,7 @@
- reg = <0x1800000 0x60000>;
- };
-
-- rng@22000 {
-+ prng: rng@22000 {
- compatible = "qcom,prng";
- reg = <0x22000 0x140>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
-@@ -300,7 +300,7 @@
- status = "disabled";
- };
-
-- crypto@8e3a000 {
-+ crypto: crypto@8e3a000 {
- compatible = "qcom,crypto-v5.1";
- reg = <0x08e3a000 0x6000>;
- clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
-@@ -386,7 +386,7 @@
- dma-names = "rx", "tx";
- };
-
-- watchdog@b017000 {
-+ watchdog: watchdog@b017000 {
- compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
- reg = <0xb017000 0x40>;
- clocks = <&sleep_clk>;
+++ /dev/null
-From e14775aa2feac18e7378cb8009b55c13d4236b50 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Mon, 7 Sep 2020 12:19:37 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
-
-Since we now have driver for the SDHCI VQMMC LDO needed
-for I/0 voltage levels lets introduce the necessary node for it.
-
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-Link: https://lore.kernel.org/r/20200907101937.10155-1-robert.marko@sartura.hr
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -209,6 +209,16 @@
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ vqmmc: regulator@1948000 {
-+ compatible = "qcom,vqmmc-ipq4019-regulator";
-+ reg = <0x01948000 0x4>;
-+ regulator-name = "vqmmc";
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-always-on;
-+ status = "disabled";
-+ };
-+
- sdhci: sdhci@7824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x11c>, <0x7824000 0x800>;
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -903,11 +903,76 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8074-dragonboard.dtb \
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
+@@ -902,11 +902,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-ap120c-ac-bit.dtb \
+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-a42.dtb \
+ qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-dap-2610.dtb \
+ qcom-ipq4018-ex6150v2.dtb \
+ qcom-ipq4018-fritzbox-4040.dtb \
+ qcom-ipq4018-gl-ap1300.dtb \
-+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-cap-ac.dtb \
+ qcom-ipq4018-hap-ac2.dtb \
projects / openwrt / staging / mkresin.git / commitdiff