ath79: buffalo_wzr-hp-g450h: fix dtc warnings

Just name buttons directly, rather than abstract and then also a label.
Likewise for leds.  Avoids DTC warnings about unit address with no reg
parameter.

Signed-off-by: Karl Palsson <karlp@etactica.com>

diff --git a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
index 4e52e30b9ddc6c743bad3e799b81f12a8096bbf5..4d7a545665fde2f033ac91979b7b9ec0ea42cbe0 100644 (file)
--- a/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
+++ b/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
@@ -21,36 +21,31 @@
                #size-cells = <0>;
 
                poll-interval = <20>;
-               button@0 {
-                       label = "usb";
+               usb {
                        linux,code = <BTN_2>;
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               button@1 {
-                       label = "reset";
+               reset {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               button@2 {
-                       label = "movie_engine";
+               movie_engine {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
                        debounce-interval = <60>;
                };
 
-               button@3 {
-                       label = "aoss";
+               aoss {
                        linux,code = <KEY_WPS_BUTTON>;
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
                };
 
-               button@4 {
-                       label = "router_off";
+               router_off {
                        linux,code = <BTN_5>;
                        gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
                        debounce-interval = <60>;
@@ -60,12 +55,12 @@
 
        leds {
                compatible = "gpio-leds";
-               led@0 {
+               security {
                        label = "buffalo:orange:security";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
 
-               led@1 {
+               diag {
                        label = "buffalo:red:diag";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
@@ -120,7 +115,7 @@
 &pcie {
        status = "okay";
 
-       ath9k@0000 {
+       ath9k@0 {
                reg = <0x0000 0 0 0 0>;
                qca,no-eeprom;
        };