mtd: rawnand: qcom: modify write_oob to remove read codeword part

QCOM NAND controller layout protects available OOB data bytes with
ECC also so when ecc->write_oob() is being called then it
can't update just OOB bytes. Currently, it first reads the last
codeword which includes old OOB bytes. Then it updates the old OOB
bytes with new ones and then again writes the codeword back.
The reading codeword is unnecessary since user is responsible to
have these bytes cleared to 0xFF.

This patch removes the read part and updates the OOB bytes with
data area padded with OxFF.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 285b2ad328deae38b0788c7b3c3ab8eee29480d7..28361b56ac4564f8b57fbd1a8a2f8ab9f5783172 100644 (file)
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2064,11 +2064,9 @@ static int qcom_nandc_write_page_raw(struct mtd_info *mtd,
 /*
  * implements ecc->write_oob()
  *
- * the NAND controller cannot write only data or only oob within a codeword,
- * since ecc is calculated for the combined codeword. we first copy the
- * entire contents for the last codeword(data + oob), replace the old oob
- * with the new one in chip->oob_poi, and then write the entire codeword.
- * this read-copy-write operation results in a slight performance loss.
+ * the NAND controller cannot write only data or only OOB within a codeword
+ * since ECC is calculated for the combined codeword. So update the OOB from
+ * chip->oob_poi, and pad the data area with OxFF before writing.
  */
 static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
                                int page)
@@ -2081,19 +2079,13 @@ static int qcom_nandc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
        int ret;
 
        host->use_ecc = true;
-
-       clear_bam_transaction(nandc);
-       ret = copy_last_cw(host, page);
-       if (ret)
-               return ret;
-
-       clear_read_regs(nandc);
        clear_bam_transaction(nandc);
 
        /* calculate the data and oob size for the last codeword/step */
        data_size = ecc->size - ((ecc->steps - 1) << 2);
        oob_size = mtd->oobavail;
 
+       memset(nandc->data_buffer, 0xff, host->cw_data);
        /* override new oob content to last codeword */
        mtd_ooblayout_get_databytes(mtd, nandc->data_buffer + data_size, oob,
                                    0, mtd->oobavail);