-## Configuration file for a typical tor user
-## Built for Tor version 0.1.0.8-rc
-## (May or may not work for older or newer versions of Tor.)
-#
-# On Unix, Tor will look for this file in someplace like "~/.tor/torrc" or
-# "/etc/torrc"
-#
-# On Windows, Tor will look for the configuration file in someplace like
-# "Application Data\tor\torrc" or "Application Data\<username>\tor\torrc"
-#
-# With the default Mac OS X installer, Tor will look in ~/.tor/torrc or
-# /Library/Tor/torrc
+## Configuration file for a typical Tor user
+## Last updated 22 December 2007 for Tor 0.2.0.14-alpha.
+## (May or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See the man page, or https://www.torproject.org/tor-manual-dev.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## http://wiki.noreply.org/noreply/TheOnionRouter/TorFAQ#torrc
## Replace this with "SocksPort 0" if you plan to run Tor only as a
## server, and not make any local application connections yourself.
SocksPort 9050 # what port to open for local application connections
-SocksBindAddress 127.0.0.1 # accept connections only from localhost
-#SocksBindAddress 192.168.0.1:9100 # listen on a chosen IP/port too
+SocksListenAddress 127.0.0.1 # accept connections only from localhost
+#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also
## Entry policies to allow/deny SOCKS requests based on IP address.
## First entry that matches wins. If no SocksPolicy is set, we accept
-## all (and only) requests from SocksBindAddress.
-#SocksPolicy accept 192.168.0.1/16
+## all (and only) requests from SocksListenAddress.
+#SocksPolicy accept 192.168.0.0/16
#SocksPolicy reject *
-## Allow no-name routers (ones that the dirserver operators don't
-## know anything about) in only these positions in your circuits.
-## Other choices (not advised) are entry,exit,introduction.
-AllowUnverifiedNodes middle,rendezvous
-
## Logs go to stdout at level "notice" unless redirected by something
-## else, like one of the below lines. You can have as many log lines as
+## else, like one of the below lines. You can have as many Log lines as
## you want.
##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
#Log notice file /var/log/tor/notices.log
-## Send only debug and info messages to /var/log/tor/debug.log
-#Log debug-info file /var/log/tor/debug.log
-## Send ONLY debug messages to /var/log/tor/debug.log
-#Log debug-debug file /var/log/tor/debug.log
-## To use the system log instead of Tor's logfiles, uncomment these lines:
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
#Log notice syslog
## To send all messages to stderr:
#Log debug stderr
## Uncomment this to start the process in the background... or use
-## --runasdaemon 1 on the command line.
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
RunAsDaemon 1
-## Tor only trusts directories signed with one of these keys, and
-## uses the given addresses to connect to the trusted directory
-## servers. If no DirServer lines are specified, Tor uses the built-in
-## defaults (moria1, moria2, tor26), so you can leave this alone unless
-## you need to change it.
-#DirServer 18.244.0.188:9031 FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441
-#DirServer 18.244.0.114:80 719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF
-#DirServer 62.116.124.106:9030 847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D
-
## The directory for keeping all the keys/etc. By default, we store
## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
DataDirectory /var/lib/tor
-## The port on which Tor will listen for local connections from Tor controller
-## applications, as documented in control-spec.txt. NB: this feature is
-## currently experimental.
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
#ControlPort 9051
############### This section is just for location-hidden services ###
-## Look in .../hidden_service/hostname for the address to tell people.
-## HiddenServicePort x y:z says to redirect a port x request from the
-## client to y:z.
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
#HiddenServiceDir /var/lib/tor/hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServiceDir /var/lib/tor/other_hidden_service/
#HiddenServicePort 80 127.0.0.1:80
#HiddenServicePort 22 127.0.0.1:22
-#HiddenServiceNodes moria1,moria2
-#HiddenServiceExcludeNodes bad,otherbad
-
-################ This section is just for servers #####################
-## NOTE: If you enable these, you should consider mailing your identity
-## key fingerprint to the tor-ops, so we can add you to the list of
-## servers that clients will trust. See
-## http://tor.eff.org/doc/tor-doc.html#server for details.
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
-## Required: A unique handle for this server
+## A unique handle for your server.
#Nickname ididnteditheconfig
-## The IP or fqdn for this server. Leave blank and Tor will guess.
+## The IP or FQDN for your server. Leave commented out and Tor will guess.
#Address noname.example.com
-## Contact info that will be published in the directory, so we can
-## contact you if you need to upgrade or if something goes wrong.
-## This is optional but recommended.
+## Define these to limit the bandwidth usage of relayed (server)
+## traffic. Your own traffic is still unthrottled.
+## Note that RelayBandwidthRate must be at least 20 KB.
+#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB/s (1600Kbps)
+
+## Contact info to be published in the directory, so we can contact you
+## if your server is misconfigured or something else goes wrong.
#ContactInfo Random Person <nobody AT example dot com>
## You might also include your PGP or GPG fingerprint if you have one:
#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com>
-## Required: what port to advertise for tor connections
+## Required: what port to advertise for Tor connections.
#ORPort 9001
-## If you want to listen on a port other than the one advertised
-## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment
-## the line below. You'll need to do ipchains or other port forwarding
+## If you need to listen on a port other than the one advertised
+## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the
+## line below too. You'll need to do ipchains or other port forwarding
## yourself to make this work.
-#ORBindAddress 0.0.0.0:9090
+#ORListenAddress 0.0.0.0:9090
-## Uncomment this to mirror the directory for others (please do)
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
#DirPort 9030 # what port to advertise for directory connections
-## If you want to listen on a port other than the one advertised
-## in DirPort (e.g. to advertise 80 but bind 9091), uncomment the line
-## below. You'll need to do ipchains or other port forwarding yourself
+## If you need to listen on a port other than the one advertised
+## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line
+## below too. You'll need to do ipchains or other port forwarding yourself
## to make this work.
-#DirBindAddress 0.0.0.0:9091
+#DirListenAddress 0.0.0.0:9091
+
+## Uncomment this if you run more than one Tor server, and add the
+## nickname of each Tor server you control, even if they're on different
+## networks. You declare it here so Tor clients can avoid using more than
+## one of your servers in a single circuit. See
+## http://wiki.noreply.org/noreply/TheOnionRouter/TorFAQ#MultipleServers
+#MyFamily nickname1,nickname2,...
## A comma-separated list of exit policies. They're considered first
-## to last, and the first match wins. If you want to *replace*
+## to last, and the first match wins. If you want to _replace_
## the default exit policy, end this with either a reject *:* or an
-## accept *:*. Otherwise, you're *augmenting* (prepending to) the
+## accept *:*. Otherwise, you're _augmenting_ (prepending to) the
## default exit policy. Leave commented to just use the default, which is
-## available in the man page or at http://tor.eff.org/documentation.html
+## available in the man page or at https://www.torproject.org/documentation.html
##
-## Look at http://wiki.noreply.org/noreply/TheOnionRouter/TorFAQ#Abuse
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
## for issues you might encounter if you use the default exit policy.
##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more
#ExitPolicy accept *:119 # accept nntp as well as default exit policy
-#ExitPolicy reject *:* # middleman only -- no exits allowed
+#ExitPolicy reject *:* # no exits allowed
+#
+################ This section is just for bridge relays ##############
+#
+## Bridge relays (or "bridges" ) are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even if an
+## ISP is filtering connections to all the known Tor relays, they probably
+## won't be able to block all the bridges. Unlike running an exit relay,
+## running a bridge relay just passes data to and from the Tor network --
+## so it shouldn't expose the operator to abuse complaints.
+
+#ORPort 443
+#BridgeRelay 1
+#RelayBandwidthRate 50KBytes
+#ExitPolicy reject *:*
User tor
Group tor
projects / openwrt / svn-archive / packages.git / commitdiff