ath5k: Correct channel setting for AR2317 chip

Correct channel setting function must be used for AR2317.
When I tested ahb patch on bullet2 all seemed to work fine,
but it couldn't connect another host (using ibss for example).
During an analysis I observed that it's transmitting on another
channel. I looked into madwifi code and understood that
the problem is in channel setting function. So atheros RF2317 not
fully handled in the current ath5k version and must be patched.

Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 78c26fdccad1389c8d8a6ef88459c934e7776c00..c44111fc98b7c2796de384aca4154844d04f4bd2 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1253,6 +1253,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah,
        case AR5K_RF5111:
                ret = ath5k_hw_rf5111_channel(ah, channel);
                break;
+       case AR5K_RF2317:
        case AR5K_RF2425:
                ret = ath5k_hw_rf2425_channel(ah, channel);
                break;