*/
#define list_next_rcu(list) (*((struct list_head __rcu **)(&(list)->next)))
+/*
+ * Check during list traversal that we are within an RCU reader
+ */
+
+#define check_arg_count_one(dummy)
+
+#ifdef CONFIG_PROVE_RCU_LIST
+#define __list_check_rcu(dummy, cond, extra...) \
+ ({ \
+ check_arg_count_one(extra); \
+ RCU_LOCKDEP_WARN(!cond && !rcu_read_lock_any_held(), \
+ "RCU-list traversed in non-reader section!"); \
+ })
+#else
+#define __list_check_rcu(dummy, cond, extra...) \
+ ({ check_arg_count_one(extra); })
+#endif
+
/*
* Insert a new entry between two known consecutive entries.
*
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_head within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as list_add_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define list_for_each_entry_rcu(pos, head, member) \
- for (pos = list_entry_rcu((head)->next, typeof(*pos), member); \
- &pos->member != (head); \
+#define list_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = list_entry_rcu((head)->next, typeof(*pos), member); \
+ &pos->member != (head); \
pos = list_entry_rcu(pos->member.next, typeof(*pos), member))
/**
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
+ * @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
-#define hlist_for_each_entry_rcu(pos, head, member) \
- for (pos = hlist_entry_safe(rcu_dereference_raw(hlist_first_rcu(head)),\
+#define hlist_for_each_entry_rcu(pos, head, member, cond...) \
+ for (__list_check_rcu(dummy, ## cond, 0), \
+ pos = hlist_entry_safe(rcu_dereference_raw(hlist_first_rcu(head)),\
typeof(*(pos)), member); \
pos; \
pos = hlist_entry_safe(rcu_dereference_raw(hlist_next_rcu(\
#ifdef CONFIG_DEBUG_LOCK_ALLOC
/**
- * rcu_read_lock_sched_held() - might we be in RCU-sched read-side critical section?
+ * rcu_read_lock_held_common() - might we be in RCU-sched read-side critical section?
+ * @ret: Best guess answer if lockdep cannot be relied on
*
- * If CONFIG_DEBUG_LOCK_ALLOC is selected, returns nonzero iff in an
+ * Returns true if lockdep must be ignored, in which case *ret contains
+ * the best guess described below. Otherwise returns false, in which
+ * case *ret tells the caller nothing and the caller should instead
+ * consult lockdep.
+ *
+ * If CONFIG_DEBUG_LOCK_ALLOC is selected, set *ret to nonzero iff in an
* RCU-sched read-side critical section. In absence of
* CONFIG_DEBUG_LOCK_ALLOC, this assumes we are in an RCU-sched read-side
* critical section unless it can prove otherwise. Note that disabling
* Check debug_lockdep_rcu_enabled() to prevent false positives during boot
* and while lockdep is disabled.
*
- * Note that if the CPU is in the idle loop from an RCU point of
- * view (ie: that we are in the section between rcu_idle_enter() and
- * rcu_idle_exit()) then rcu_read_lock_held() returns false even if the CPU
- * did an rcu_read_lock(). The reason for this is that RCU ignores CPUs
- * that are in such a section, considering these as in extended quiescent
- * state, so such a CPU is effectively never in an RCU read-side critical
- * section regardless of what RCU primitives it invokes. This state of
- * affairs is required --- we need to keep an RCU-free window in idle
- * where the CPU may possibly enter into low power mode. This way we can
- * notice an extended quiescent state to other CPUs that started a grace
- * period. Otherwise we would delay any grace period as long as we run in
- * the idle task.
+ * Note that if the CPU is in the idle loop from an RCU point of view (ie:
+ * that we are in the section between rcu_idle_enter() and rcu_idle_exit())
+ * then rcu_read_lock_held() sets *ret to false even if the CPU did an
+ * rcu_read_lock(). The reason for this is that RCU ignores CPUs that are
+ * in such a section, considering these as in extended quiescent state,
+ * so such a CPU is effectively never in an RCU read-side critical section
+ * regardless of what RCU primitives it invokes. This state of affairs is
+ * required --- we need to keep an RCU-free window in idle where the CPU may
+ * possibly enter into low power mode. This way we can notice an extended
+ * quiescent state to other CPUs that started a grace period. Otherwise
+ * we would delay any grace period as long as we run in the idle task.
*
- * Similarly, we avoid claiming an SRCU read lock held if the current
+ * Similarly, we avoid claiming an RCU read lock held if the current
* CPU is offline.
*/
+static bool rcu_read_lock_held_common(bool *ret)
+{
+ if (!debug_lockdep_rcu_enabled()) {
+ *ret = 1;
+ return true;
+ }
+ if (!rcu_is_watching()) {
+ *ret = 0;
+ return true;
+ }
+ if (!rcu_lockdep_current_cpu_online()) {
+ *ret = 0;
+ return true;
+ }
+ return false;
+}
+
int rcu_read_lock_sched_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ bool ret;
+
+ if (rcu_read_lock_held_common(&ret))
+ return ret;
return lock_is_held(&rcu_sched_lock_map) || !preemptible();
}
EXPORT_SYMBOL(rcu_read_lock_sched_held);
*/
int rcu_read_lock_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ bool ret;
+
+ if (rcu_read_lock_held_common(&ret))
+ return ret;
return lock_is_held(&rcu_lock_map);
}
EXPORT_SYMBOL_GPL(rcu_read_lock_held);
*/
int rcu_read_lock_bh_held(void)
{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- if (!rcu_is_watching())
- return 0;
- if (!rcu_lockdep_current_cpu_online())
- return 0;
+ bool ret;
+
+ if (rcu_read_lock_held_common(&ret))
+ return ret;
return in_softirq() || irqs_disabled();
}
EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
+int rcu_read_lock_any_held(void)
+{
+ bool ret;
+
+ if (rcu_read_lock_held_common(&ret))
+ return ret;
+ if (lock_is_held(&rcu_lock_map) ||
+ lock_is_held(&rcu_bh_lock_map) ||
+ lock_is_held(&rcu_sched_lock_map))
+ return 1;
+ return !preemptible();
+}
+EXPORT_SYMBOL_GPL(rcu_read_lock_any_held);
+
#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
/**
projects / openwrt / staging / blogic.git / commitdiff