Update configuration.

diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index d55b51eb975dc82fb6d7223b8a81d714dea04ef2..492fe49424d50c69e68d4be391981f6ff0082e2e 100644 (file)
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -57,7 +57,7 @@
 #undef CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND     "bootm 100000"  /* default boot command */
 
-#define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
+#undef  CONFIG_LOADS_ECHO              /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
 #define CONFIG_MII             1       /* MII PHY management           */
@@ -228,44 +228,34 @@
 #define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
 #define CFG_JFFS2_NUM_BANKS     1           /* ! second bank contains U-Boot */
 
-#if 0 /* Use NVRAM for environment variables */
 /*-----------------------------------------------------------------------
- * NVRAM organization
+ * I2C EEPROM (CAT24WC32) for environment
  */
-#define CFG_ENV_IS_IN_NVRAM    1       /* use NVRAM for environment vars       */
-#define CFG_ENV_SIZE           0x0ff8          /* Size of Environment vars     */
-#define CFG_ENV_ADDR           \
-       (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-(CFG_ENV_SIZE+8))   /* Env  */
+#define CONFIG_HARD_I2C                        /* I2c with hardware support */
+#define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
+#define CFG_I2C_SLAVE          0x7F
 
-#else /* Use EEPROM for environment variables */
+#define CFG_I2C_EEPROM_ADDR    0x50    /* EEPROM CAT28WC32             */
+#define CFG_I2C_EEPROM_ADDR_LEN        2       /* Bytes of address             */
+/* mask of address bits that overflow into the "EEPROM chip address"    */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW   0x01
+#define CFG_EEPROM_PAGE_WRITE_BITS 5   /* The Catalyst CAT24WC32 has   */
+                                       /* 32 byte page write mode using*/
+                                       /* last 5 bits of the address   */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10   /* and takes up to 10 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+/* Use EEPROM for environment variables */
 
 #define CFG_ENV_IS_IN_EEPROM    1       /* use EEPROM for environment vars */
 #define CFG_ENV_OFFSET          0x000   /* environment starts at the beginning of the EEPROM */
-#define CFG_ENV_SIZE            0x400   /* 1024 bytes may be used for env vars*/
-                                  /* total size of a CAT24WC08 is 1024 bytes */
-#endif
+#define CFG_ENV_SIZE            0x800   /* 2048 bytes may be used for env vars*/
+                                  /* total size of a CAT24WC32 is 4096 bytes */
 
 #define CFG_NVRAM_BASE_ADDR    0xf0200000              /* NVRAM base address   */
 #define CFG_NVRAM_SIZE         (32*1024)               /* NVRAM size           */
 #define CFG_NVRAM_VXWORKS_OFFS 0x6900          /* Offset for VxWorks eth-addr  */
 
-/*-----------------------------------------------------------------------
- * I2C EEPROM (CAT24WC08) for environment
- */
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
-#define CFG_I2C_SLAVE          0x7F
-
-#define CFG_I2C_EEPROM_ADDR    0x50    /* EEPROM CAT28WC08             */
-#define CFG_I2C_EEPROM_ADDR_LEN        1       /* Bytes of address             */
-/* mask of address bits that overflow into the "EEPROM chip address"    */
-#define CFG_I2C_EEPROM_ADDR_OVERFLOW   0x07
-#define CFG_EEPROM_PAGE_WRITE_BITS 4   /* The Catalyst CAT24WC08 has   */
-                                       /* 16 byte page write mode using*/
-                                       /* last 4 bits of the address   */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10   /* and takes up to 10 msec */
-#define CFG_EEPROM_PAGE_WRITE_ENABLE
-
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */

diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 8ab253a35e674213372756259e446c548cf10e68..9cd8f5a32d0f3a8b25903242d65d856a6b062365 100644 (file)
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -133,6 +133,8 @@
 
 #undef CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 
+#define CONFIG_VERSION_VARIABLE        1       /* include version env variable */
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------

diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 54b53bc71f1dbd4556845f33a168c0dc56ea3eb3..35d49fcec854e7e48af0721f83de73b6268dc57e 100644 (file)
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -63,6 +63,7 @@
 #define        CONFIG_PHY_ADDR         0       /* PHY address                  */
 
 #define CONFIG_COMMANDS              ( CONFIG_CMD_DFL  | \
+                               CFG_CMD_BSP     | \
                                CFG_CMD_PCI     | \
                                CFG_CMD_IRQ     | \
                                CFG_CMD_ELF     | \
@@ -254,6 +255,19 @@
 #define CFG_EBC_PB3AP   0x010059C0   /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
 #define CFG_EBC_PB3CR   CF_BA | 0x1A000     /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
 
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ */
+#define CFG_FPGA_XC95XL         1           /* using Xilinx XC95XL CPLD      */
+#define CFG_FPGA_MAX_SIZE       32*1024     /* 32kByte is enough for CPLD    */
+
+/* FPGA program pin configuration */
+#define CFG_FPGA_PRG            0x04000000  /* JTAG TMS pin (ppc output)     */
+#define CFG_FPGA_CLK            0x02000000  /* JTAG TCK pin (ppc output)     */
+#define CFG_FPGA_DATA           0x01000000  /* JTAG TDO->TDI data pin (ppc output) */
+#define CFG_FPGA_INIT           0x00010000  /* unused (ppc input)            */
+#define CFG_FPGA_DONE           0x00008000  /* JTAG TDI->TDO pin (ppc input) */
+
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */