lantiq: add (incomplete) support for Aztech GR7000

*) can not connect to switch chip
*) only one usb port is working
*) wifi is not working

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37712

diff --git a/target/linux/lantiq/base-files/etc/uci-defaults/02_network b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
index f5401c3edd5f737dff6a2d0dbb8cdef980eef7ae..6b0093c70be1338eed5aa07c54b31a67f4b32377 100755 (executable)
--- a/target/linux/lantiq/base-files/etc/uci-defaults/02_network
+++ b/target/linux/lantiq/base-files/etc/uci-defaults/02_network
@@ -73,11 +73,17 @@ VG3503J)
        ucidef_set_interface_lan 'eth0'
        uci set network.lan.type='none'
        ;;
+
 DGN3500*)
        ucidef_set_interface_lan "eth0.1"
        ucidef_add_switch "switch0" "1" "1"
        ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
        ;;
+
+GR7000)
+       ucidef_set_interface_wan "eth0"
+       uci set network.lan.ifname=''
+       ;;
 esac
 
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"

diff --git a/target/linux/lantiq/dts/GR7000.dts b/target/linux/lantiq/dts/GR7000.dts
new file mode 100644 (file)
index 0000000..6dbd92f
--- /dev/null
+++ b/target/linux/lantiq/dts/GR7000.dts
@@ -0,0 +1,135 @@
+/dts-v1/;
+
+/include/ "ar9.dtsi"
+
+/ {
+       model = "GR7000 - Aztech GR7000";
+
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x2000000>;
+       };
+
+       fpi@10000000 {
+               localbus@0 {
+                       nor-boot@0 {
+                               compatible = "lantiq,nor";
+                               bank-width = <2>;
+                               reg = <0 0x0 0x2000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               partition@0 {
+                                       label = "uboot";
+                                       reg = <0x0 0x20000>;
+                                       read-only;
+                               };
+
+                               partition@20000 {
+                                       label = "uboot_env";
+                                       reg = <0x20000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "linux";
+                                       reg = <0x30000 0x7d0000>;
+                               };
+                       };
+               };
+
+               gpio: pinmux@E100B10 {
+                       compatible = "lantiq,pinctrl-xr9";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               stp {
+                                       lantiq,groups = "stp";
+                                       lantiq,function = "stp";
+                               };
+                               pci-in {
+                                       lantiq,groups = "req1";
+                                       lantiq,output = <0>;
+                                       lantiq,open-drain = <1>;
+                                       lantiq,pull = <2>;
+                               };
+                               pci-out {
+                                       lantiq,groups = "gnt1";
+                                       lantiq,output = <1>;
+                                       lantiq,pull = <0>;
+                               };
+                               pci_rst {
+                                       lantiq,pins = "io21";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+               };
+
+               pci@E105400 {
+                       status = "okay";
+               };
+
+               stp: stp@E100BB0 {
+                       compatible = "lantiq,gpio-stp-xway";
+                       #gpio-cells = <2>;
+                       gpio-controller;
+                       reg = <0xE100BB0 0x40>;
+
+                       lantiq,shadow = <0xfff>;
+                       lantiq,groups = <0x3>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 53 1>;
+                       linux,code = <0x198>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 54 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power2 {
+                       label = "power2";
+                       gpios = <&stp 4 0>;
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&stp 2 1>;
+                       default-state = "off";
+               };
+               internet2 {
+                       label = "internet2";
+                       gpios = <&stp 3 1>;
+               };
+               usb {
+                       label = "usb";
+                       gpios = <&stp 10 1>;
+               };
+               wifi {
+                       label = "wifi";
+                       gpios = <&stp 15 1>;
+               };
+       };
+};

diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 724362ec26e7a7449f2e5072b382515bb9af4288..5e97337f5284c2a11eefc28b88f817111f587e42 100644 (file)
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -229,6 +229,9 @@ Image/Build/Profile/WBMRB=$(call Image/Build/$(1),$(1),WBMR)
 Image/BuildKernel/Profile/FRITZ7320=$(call Image/BuildKernelEVA/Template,FRITZ7320)
 Image/Build/Profile/FRITZ7320=$(call Image/BuildEVA/$(1),$(1),FRITZ7320)
 
+Image/BuildKernel/Profile/GR7000=$(call Image/BuildKernel/Template,GR7000)
+Image/Build/Profile/GR7000=$(call Image/Build/$(1),$(1),GR7000)
+
 
 # VR9
 Image/BuildKernel/Profile/EASY80920NAND=$(call Image/BuildKernel/Template,EASY80920NAND)

diff --git a/target/linux/lantiq/xway/profiles/aztech.mk b/target/linux/lantiq/xway/profiles/aztech.mk
new file mode 100644 (file)
index 0000000..3b9e92d
--- /dev/null
+++ b/target/linux/lantiq/xway/profiles/aztech.mk
@@ -0,0 +1,7 @@
+define Profile/GR7000
+  NAME:=Aztech GR7000
+  PACKAGES:= \
+       kmod-ltq-deu-ar9 kmod-ltq-hcd-ar9 \
+       swconfig
+endef
+$(eval $(call Profile,GR7000))