# Alchemy Develboards
#
-obj-y += prom.o bcsr.o
+obj-y += prom.o bcsr.o platform.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1000) += pb1000/
obj-$(CONFIG_MIPS_PB1100) += pb1100/
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
+ set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
+ set_irq_type(AU1000_GPIO_21, IRQF_TRIGGER_LOW); /* STSCHG0# */
+ set_irq_type(AU1000_GPIO_22, IRQF_TRIGGER_LOW); /* STSCHG1# */
#else
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */
--- /dev/null
+/*
+ * DBAu1xxx board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-au1x00/au1xxx.h>
+#include "../platform.h"
+
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#define DB1XXX_HAS_PCMCIA
+#endif
+
+/* DB1xxx PCMCIA interrupt sources:
+ * CD0/1 GPIO0/3
+ * STSCHG0/1 GPIO1/4
+ * CARD0/1 GPIO2/5
+ * Db1550: 0/1, 21/22, 3/5
+ */
+#ifndef CONFIG_MIPS_DB1550
+/* Db1000, Db1100, Db1500 */
+#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
+#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO_1
+#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_2
+#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_3
+#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO_4
+#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
+#else
+#define DB1XXX_PCMCIA_CD0 AU1000_GPIO_0
+#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO_21
+#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO_3
+#define DB1XXX_PCMCIA_CD1 AU1000_GPIO_1
+#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO_22
+#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO_5
+#endif
+
+static int __init db1xxx_dev_init(void)
+{
+#ifdef DB1XXX_HAS_PCMCIA
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ DB1XXX_PCMCIA_CARD0,
+ DB1XXX_PCMCIA_CD0,
+ /*DB1XXX_PCMCIA_STSCHG0*/0,
+ 0,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
+ DB1XXX_PCMCIA_CARD1,
+ DB1XXX_PCMCIA_CD1,
+ /*DB1XXX_PCMCIA_STSCHG1*/0,
+ 0,
+ 1);
+#endif
+ return 0;
+}
+device_initcall(db1xxx_dev_init);
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1100.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
--- /dev/null
+/*
+ * Pb1100 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+
+#include "../platform.h"
+
+static int __init pb1100_dev_init(void)
+{
+ /* PCMCIA. single socket, identical to Pb1500 */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ AU1000_GPIO_11, /* card */
+ AU1000_GPIO_9, /* insert */
+ /*AU1000_GPIO_10*/0, /* stschg */
+ 0, /* eject */
+ 0); /* id */
+ return 0;
+}
+device_initcall(pb1100_dev_init);
#include <asm/mach-au1x00/au1100_mmc.h>
#include <asm/mach-db1x00/bcsr.h>
+#include "../platform.h"
+
static int mmc_activity;
static void pb1200mmc0_set_power(void *mmc_host, int state)
static int __init board_register_devices(void)
{
+#ifdef CONFIG_MIPS_PB1200
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ PB1200_PC0_INT,
+ PB1200_PC0_INSERT_INT,
+ /*PB1200_PC0_STSCHG_INT*/0,
+ PB1200_PC0_EJECT_INT,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
+ PB1200_PC1_INT,
+ PB1200_PC1_INSERT_INT,
+ /*PB1200_PC1_STSCHG_INT*/0,
+ PB1200_PC1_EJECT_INT,
+ 1);
+#else
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ DB1200_PC0_INT,
+ DB1200_PC0_INSERT_INT,
+ /*DB1200_PC0_STSCHG_INT*/0,
+ DB1200_PC0_EJECT_INT,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00440000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00440000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00400000,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00401000 - 1,
+ DB1200_PC1_INT,
+ DB1200_PC1_INSERT_INT,
+ /*DB1200_PC1_STSCHG_INT*/0,
+ DB1200_PC1_EJECT_INT,
+ 1);
+#endif
+
return platform_add_devices(board_platform_devices,
ARRAY_SIZE(board_platform_devices));
}
-
-arch_initcall(board_register_devices);
+device_initcall(board_register_devices);
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-pb1x00/pb1500.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
static int __init pb1500_init_irq(void)
{
+ set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* CD0# */
+ set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* CARD0 */
+ set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
--- /dev/null
+/*
+ * Pb1500 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#include "../platform.h"
+
+static int __init pb1500_dev_init(void)
+{
+ /* PCMCIA. single socket, identical to Pb1500 */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ AU1000_GPIO_11, /* card */
+ AU1000_GPIO_9, /* insert */
+ /*AU1000_GPIO_10*/0, /* stschg */
+ 0, /* eject */
+ 0); /* id */
+ return 0;
+}
+device_initcall(pb1500_dev_init);
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
-obj-y := board_setup.o
+obj-y := board_setup.o platform.o
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <asm/mach-db1x00/bcsr.h>
+#include <asm/mach-au1x00/gpio.h>
#include <prom.h>
}
#endif
+ alchemy_gpio2_enable();
+
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
{
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
+ set_irq_type(AU1500_GPIO_201_205, IRQF_TRIGGER_HIGH);
+
+ /* enable both PCMCIA card irqs in the shared line */
+ alchemy_gpio2_enable_int(201);
+ alchemy_gpio2_enable_int(202);
return 0;
}
--- /dev/null
+/*
+ * Pb1550 board platform device registration
+ *
+ * Copyright (C) 2009 Manuel Lauss
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-pb1x00/pb1550.h>
+
+#include "../platform.h"
+
+static int __init pb1550_dev_init(void)
+{
+ /* Pb1550, like all others, also has statuschange irqs; however they're
+ * wired up on one of the Au1550's shared GPIO201_205 line, which also
+ * services the PCMCIA card interrupts. So we ignore statuschange and
+ * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia
+ * drivers are used to shared irqs and b) statuschange isn't really use-
+ * ful anyway.
+ */
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00040000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00001000 - 1,
+ AU1500_GPIO_201_205,
+ AU1000_GPIO_0,
+ 0,
+ 0,
+ 0);
+
+ db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_ATTR_PSEUDO_PHYS + 0x00840000 - 1,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_MEM_PSEUDO_PHYS + 0x00840000 - 1,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00800000,
+ PCMCIA_IO_PSEUDO_PHYS + 0x00801000 - 1,
+ AU1500_GPIO_201_205,
+ AU1000_GPIO_1,
+ 0,
+ 0,
+ 1);
+
+ return 0;
+}
+device_initcall(pb1550_dev_init);
--- /dev/null
+/*
+ * devoard misc stuff.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+/* register a pcmcia socket */
+int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
+ unsigned long pseudo_attr_end,
+ unsigned long pseudo_mem_start,
+ unsigned long pseudo_mem_end,
+ unsigned long pseudo_io_start,
+ unsigned long pseudo_io_end,
+ int card_irq,
+ int cd_irq,
+ int stschg_irq,
+ int eject_irq,
+ int id)
+{
+ int cnt, i, ret;
+ struct resource *sr;
+ struct platform_device *pd;
+
+ cnt = 5;
+ if (eject_irq)
+ cnt++;
+ if (stschg_irq)
+ cnt++;
+
+ sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL);
+ if (!sr)
+ return -ENOMEM;
+
+ pd = platform_device_alloc("db1xxx_pcmcia", id);
+ if (!pd) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sr[0].name = "pseudo-attr";
+ sr[0].flags = IORESOURCE_MEM;
+ sr[0].start = pseudo_attr_start;
+ sr[0].end = pseudo_attr_end;
+
+ sr[1].name = "pseudo-mem";
+ sr[1].flags = IORESOURCE_MEM;
+ sr[1].start = pseudo_mem_start;
+ sr[1].end = pseudo_mem_end;
+
+ sr[2].name = "pseudo-io";
+ sr[2].flags = IORESOURCE_MEM;
+ sr[2].start = pseudo_io_start;
+ sr[2].end = pseudo_io_end;
+
+ sr[3].name = "insert";
+ sr[3].flags = IORESOURCE_IRQ;
+ sr[3].start = sr[3].end = cd_irq;
+
+ sr[4].name = "card";
+ sr[4].flags = IORESOURCE_IRQ;
+ sr[4].start = sr[4].end = card_irq;
+
+ i = 5;
+ if (stschg_irq) {
+ sr[i].name = "insert";
+ sr[i].flags = IORESOURCE_IRQ;
+ sr[i].start = sr[i].end = cd_irq;
+ i++;
+ }
+ if (eject_irq) {
+ sr[i].name = "eject";
+ sr[i].flags = IORESOURCE_IRQ;
+ sr[i].start = sr[i].end = eject_irq;
+ }
+
+ pd->resource = sr;
+ pd->num_resources = cnt;
+
+ ret = platform_device_add(pd);
+ if (!ret)
+ return 0;
+
+ platform_device_put(pd);
+out:
+ kfree(sr);
+ return ret;
+}
--- /dev/null
+#ifndef _DEVBOARD_PLATFORM_H_
+#define _DEVBOARD_PLATFORM_H_
+
+#include <linux/init.h>
+
+int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
+ unsigned long pseudo_attr_len,
+ unsigned long pseudo_mem_start,
+ unsigned long pseudo_mem_end,
+ unsigned long pseudo_io_start,
+ unsigned long pseudo_io_end,
+ int card_irq,
+ int cd_irq,
+ int stschg_irq,
+ int eject_irq,
+ int id);
+
+#endif
DB1200_INT_END = DB1200_INT_BEGIN + 15,
};
-
-/*
- * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT) & (1 << (8 + (2 * SOCKET))))
-
/* NAND chip select */
#define NAND_CS 1
#endif
-/* PCMCIA DBAu1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
/*
* NAND defines
*
+++ /dev/null
-/*
- * Alchemy Semi Pb1100 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1100_H
-#define __ASM_PB1100_H
-
-/* PCMCIA Pb1100 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1100_H */
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/*
- * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
- */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) (bcsr_read(BCSR_SIGSTAT & (1 << (8 + (2 * SOCKET))))
-
/* NAND chip select */
#define NAND_CS 1
+++ /dev/null
-/*
- * Alchemy Semi Pb1500 Referrence Board
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_PB1500_H
-#define __ASM_PB1500_H
-
-/* PCMCIA Pb1500 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
-
-#endif /* __ASM_PB1500_H */
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT) \
- ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
#elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER)
projects / openwrt / staging / blogic.git / commitdiff