ath79: split Engenius EPG5000 DTS to common DTSI

Split the DTS to be used with similar boards made by Senao,
dual-band routers with Atheros / Qualcomm ethernet switch.

Set initvals for the switch in each device's DTS.
Set some common calibration nvmem-cells in DTSI.

While at it, fix MTD partition node names.

Signed-off-by: Michael Pratt <mcpratt@pm.me>

diff --git a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
index 35716152add615e4f65ba5ba9aee09c7c5b22996..37ad32f330e79087fb2046afb05cad7bc89b97a7 100644 (file)
--- a/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
+++ b/target/linux/ath79/dts/qca9558_engenius_epg5000.dts
@@ -1,9 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "qca955x_senao_router-dual.dtsi"
 
 / {
        model = "EnGenius EPG5000";
@@ -47,110 +44,13 @@
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       phy-handle = <&phy0>;
-       pll-data = <0xa6000000 0x00000101 0x00001616>;
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x87600000 /* PORT0 PAD MODE CTRL */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-                       >;
-       };
-};
-
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "pci168c,003c";
-               reg = <0x0000 0 0 0 0>;
-       };
 };
 
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x030000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x030000 0x010000>;
-                       };
-
-                       partition@40000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x040000 0xe50000>;
-                       };
-
-                       partition@790000 {
-                               label = "manufacture";
-                               reg = <0xe90000 0x100000>;
-                               read-only;
-                       };
-
-                       partition@ed0000 {
-                               label = "backup";
-                               reg = <0xf90000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@fe0000 {
-                               label = "storage";
-                               reg = <0xfa0000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
+&phy0 {
+       qca,ar8327-initvals = <
+               0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+               0x7c 0x0000007e /* PORT0_STATUS */
+       >;
 };
 
 &usb_phy1 {
@@ -162,7 +62,5 @@
 };
 
 &wmac {
-       status = "okay";
-
        qca,no-eeprom;
 };

diff --git a/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi b/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi
new file mode 100644 (file)
index 0000000..20bea91
--- /dev/null
+++ b/target/linux/ath79/dts/qca955x_senao_router-dual.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&phy0>;
+       pll-data = <0xa6000000 0x00000101 0x00001616>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&pcie0 {
+       status = "okay";
+
+       ath10k_0: wifi@0,0,0 {
+               compatible = "qcom,ath10k";
+               reg = <0x0000 0 0 0 0>;
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x030000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x040000 0xe50000>;
+                       };
+
+                       partition@e90000 {
+                               label = "manufacture";
+                               reg = <0xe90000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@f90000 {
+                               label = "backup";
+                               reg = <0xf90000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@fa0000 {
+                               label = "storage";
+                               reg = <0xfa0000 0x050000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+
+                               compatible = "nvmem-cells";
+
+                               calibration_art_1000: calibration@1000 {
+                                       reg = <0x1000 0x440>;
+                               };
+
+                               calibration_art_5000: calibration@5000 {
+                                       reg = <0x5000 0x844>;
+                               };
+                       };
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+};