ARM: shmobile: porter: Move SPI FLASH partitions to subnode

As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a
dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions
in a special 'partitions' subnode"), having partitions as direct subnodes
of an mtd device is discouraged. Hence move the SPI FLASH partitions to a
"partitions" subnode.

Based on similar work for the koelsch board by Geert Uytterhoeven.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 3e198e7b3ee4aa6e7f80f289a7eb240322162165..f2dd5356eac8786c371c931a4e6ca4a196075efa 100644 (file)
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -192,8 +192,6 @@
        status = "okay";
 
        flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "spansion,s25fl512s", "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <30000000>;
@@ -201,19 +199,24 @@
                spi-rx-bus-width = <4>;
                m25p,fast-read;
 
-               partition@0 {
-                       label = "loader_prg";
-                       reg = <0x00000000 0x00040000>;
-                       read-only;
-               };
-               partition@40000 {
-                       label = "user_prg";
-                       reg = <0x00040000 0x00400000>;
-                       read-only;
-               };
-               partition@440000 {
-                       label = "flash_fs";
-                       reg = <0x00440000 0x03bc0000>;
+               partitions {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "loader_prg";
+                               reg = <0x00000000 0x00040000>;
+                               read-only;
+                       };
+                       partition@40000 {
+                               label = "user_prg";
+                               reg = <0x00040000 0x00400000>;
+                               read-only;
+                       };
+                       partition@440000 {
+                               label = "flash_fs";
+                               reg = <0x00440000 0x03bc0000>;
+                       };
                };
        };
 };