NET: sa11x0-ir: move sa1100_irda_txdma_irq

Move the FIR DMA transmit completion function along-side the other FIR
protocol functions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c
index 61b42d1265b4e2bee49101df7472a7202f72babf..0b5a2e2a7be454654cf59213fdabb4ec1222a5a5 100644 (file)
--- a/drivers/net/irda/sa1100_ir.c
+++ b/drivers/net/irda/sa1100_ir.c
@@ -261,6 +261,57 @@ static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_ird
 /*
  * FIR format support.
  */
+static void sa1100_irda_firtxdma_irq(void *id)
+{
+       struct net_device *dev = id;
+       struct sa1100_irda *si = netdev_priv(dev);
+       struct sk_buff *skb;
+
+       /*
+        * Wait for the transmission to complete.  Unfortunately,
+        * the hardware doesn't give us an interrupt to indicate
+        * "end of frame".
+        */
+       do
+               rmb();
+       while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
+
+       /*
+        * Clear the transmit underrun bit.
+        */
+       Ser2HSSR0 = HSSR0_TUR;
+
+       /*
+        * Do we need to change speed?  Note that we're lazy
+        * here - we don't free the old dma_rx.skb.  We don't need
+        * to allocate a buffer either.
+        */
+       sa1100_irda_check_speed(si);
+
+       /*
+        * Start reception.  This disables the transmitter for
+        * us.  This will be using the existing RX buffer.
+        */
+       sa1100_irda_rx_dma_start(si);
+
+       /* Account and free the packet. */
+       skb = si->dma_tx.skb;
+       if (skb) {
+               dma_unmap_single(si->dev, si->dma_tx.dma, skb->len,
+                                DMA_TO_DEVICE);
+               dev->stats.tx_packets ++;
+               dev->stats.tx_bytes += skb->len;
+               dev_kfree_skb_irq(skb);
+               si->dma_tx.skb = NULL;
+       }
+
+       /*
+        * Make sure that the TX queue is available for sending
+        * (for retries).  TX has priority over RX at all times.
+        */
+       netif_wake_queue(dev);
+}
+
 static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev,
        struct sa1100_irda *si)
 {
@@ -528,60 +579,6 @@ static irqreturn_t sa1100_irda_irq(int irq, void *dev_id)
        return si->irq(dev, si);
 }
 
-/*
- * TX DMA completion handler.
- */
-static void sa1100_irda_txdma_irq(void *id)
-{
-       struct net_device *dev = id;
-       struct sa1100_irda *si = netdev_priv(dev);
-       struct sk_buff *skb;
-
-       /*
-        * Wait for the transmission to complete.  Unfortunately,
-        * the hardware doesn't give us an interrupt to indicate
-        * "end of frame".
-        */
-       do
-               rmb();
-       while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY);
-
-       /*
-        * Clear the transmit underrun bit.
-        */
-       Ser2HSSR0 = HSSR0_TUR;
-
-       /*
-        * Do we need to change speed?  Note that we're lazy
-        * here - we don't free the old dma_rx.skb.  We don't need
-        * to allocate a buffer either.
-        */
-       sa1100_irda_check_speed(si);
-
-       /*
-        * Start reception.  This disables the transmitter for
-        * us.  This will be using the existing RX buffer.
-        */
-       sa1100_irda_rx_dma_start(si);
-
-       /* Account and free the packet. */
-       skb = si->dma_tx.skb;
-       if (skb) {
-               dma_unmap_single(si->dev, si->dma_tx.dma, skb->len,
-                                DMA_TO_DEVICE);
-               dev->stats.tx_packets ++;
-               dev->stats.tx_bytes += skb->len;
-               dev_kfree_skb_irq(skb);
-               si->dma_tx.skb = NULL;
-       }
-
-       /*
-        * Make sure that the TX queue is available for sending
-        * (for retries).  TX has priority over RX at all times.
-        */
-       netif_wake_queue(dev);
-}
-
 static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev)
 {
        struct sa1100_irda *si = netdev_priv(dev);
@@ -730,7 +727,8 @@ static int sa1100_irda_start(struct net_device *dev)
                goto err_rx_dma;
 
        err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit",
-                                sa1100_irda_txdma_irq, dev, &si->dma_tx.regs);
+                                sa1100_irda_firtxdma_irq, dev,
+                                &si->dma_tx.regs);
        if (err)
                goto err_tx_dma;