char name[SLOT_NAME_SIZE];
};
-/**
+/*
* struct acpiphp_bridge - PCI bridge information
*
* for each bridge device in ACPI namespace
};
-/**
+/*
* struct acpiphp_slot - PCI slot information
*
* PCI slot information for each *physical* PCI slot
};
-/**
+/*
* struct acpiphp_func - PCI function information
*
* PCI function information for each object in ACPI namespace
u32 flags; /* see below */
};
-/**
+/*
* struct acpiphp_attention_info - device specific attention registration
*
* ACPI has no generic method of setting/getting attention status
* acpiphp_register_attention - set attention LED callback
* @info: must be completely filled with LED callbacks
*
- * Description: this is used to register a hardware specific ACPI
+ * Description: This is used to register a hardware specific ACPI
* driver that manipulates the attention LED. All the fields in
* info must be set.
- **/
+ */
int acpiphp_register_attention(struct acpiphp_attention_info *info)
{
int retval = -EINVAL;
* acpiphp_unregister_attention - unset attention LED callback
* @info: must match the pointer used to register
*
- * Description: this is used to un-register a hardware specific acpi
+ * Description: This is used to un-register a hardware specific acpi
* driver that manipulates the attention LED. The pointer to the
* info struct must be the same as the one used to set it.
- **/
+ */
int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
{
int retval = -EINVAL;
* @hotplug_slot: slot to enable
*
* Actual tasks are done in acpiphp_enable_slot()
- *
*/
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
* @hotplug_slot: slot to disable
*
* Actual tasks are done in acpiphp_disable_slot()
- *
*/
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
}
- /**
- * set_attention_status - set attention LED
+/**
+ * set_attention_status - set attention LED
* @hotplug_slot: slot to set attention LED on
* @status: value to set attention LED to (0 or 1)
*
* attention status LED, so we use a callback that
* was registered with us. This allows hardware specific
* ACPI implementations to blink the light for us.
- **/
+ */
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
{
int retval = -ENODEV;
*
* Some platforms may not implement _STA method properly.
* In that case, the value returned may not be reliable.
- *
*/
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
}
- /**
+/**
* get_attention_status - get attention LED status
* @hotplug_slot: slot to get status from
* @value: returns with value of attention LED
* ACPI doesn't have known method to determine the state
* of the attention status LED, so we use a callback that
* was registered with us. This allows hardware specific
- * ACPI implementations to determine its state
- **/
+ * ACPI implementations to determine its state.
+ */
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
int retval = -EINVAL;
* @value: pointer to store status
*
* ACPI doesn't provide any formal means to access latch status.
- * Instead, we fake latch status from _STA
- *
+ * Instead, we fake latch status from _STA.
*/
static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
* @value: pointer to store status
*
* ACPI doesn't provide any formal means to access adapter status.
- * Instead, we fake adapter status from _STA
- *
+ * Instead, we fake adapter status from _STA.
*/
static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
* 2. has _PS0 method
* 3. has _PS3 method
* 4. ..
- *
*/
static int is_ejectable(acpi_handle handle)
{
/**
- * acpiphp_max_busnr - return the highest reserved bus number under
- * the given bus.
+ * acpiphp_max_busnr - return the highest reserved bus number under the given bus.
* @bus: bus to start search with
- *
*/
static unsigned char acpiphp_max_busnr(struct pci_bus *bus)
{
/**
* acpiphp_bus_add - add a new bus to acpi subsystem
* @func: acpiphp_func of the bridge
- *
*/
static int acpiphp_bus_add(struct acpiphp_func *func)
{
/**
* acpiphp_bus_trim - trim a bus from acpi subsystem
* @handle: handle to acpi namespace
- *
*/
static int acpiphp_bus_trim(acpi_handle handle)
{
*
* This function should be called per *physical slot*,
* not per each slot object in ACPI namespace.
- *
*/
static int enable_device(struct acpiphp_slot *slot)
{
/**
* disable_device - disable a slot
+ * @slot: ACPI PHP slot
*/
static int disable_device(struct acpiphp_slot *slot)
{
/**
* get_slot_status - get ACPI slot status
+ * @slot: ACPI PHP slot
*
- * if a slot has _STA for each function and if any one of them
- * returned non-zero status, return it
+ * If a slot has _STA for each function and if any one of them
+ * returned non-zero status, return it.
*
- * if a slot doesn't have _STA and if any one of its functions'
- * configuration space is configured, return 0x0f as a _STA
+ * If a slot doesn't have _STA and if any one of its functions'
+ * configuration space is configured, return 0x0f as a _STA.
*
- * otherwise return 0
+ * Otherwise return 0.
*/
static unsigned int get_slot_status(struct acpiphp_slot *slot)
{
/**
* acpiphp_eject_slot - physically eject the slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_eject_slot(struct acpiphp_slot *slot)
{
/**
* acpiphp_check_bridge - re-enumerate devices
+ * @bridge: where to begin re-enumeration
*
* Iterate over all slots under this bridge and make sure that if a
* card is present they are enabled, and if not they are disabled.
/**
* handle_hotplug_event_bridge - handle ACPI event on bridges
- *
* @handle: Notify()'ed acpi_handle
* @type: Notify code
* @context: pointer to acpiphp_bridge structure
*
- * handles ACPI event notification on {host,p2p} bridges
- *
+ * Handles ACPI event notification on {host,p2p} bridges.
*/
static void handle_hotplug_event_bridge(acpi_handle handle, u32 type, void *context)
{
/**
* handle_hotplug_event_func - handle ACPI event on functions (i.e. slots)
- *
* @handle: Notify()'ed acpi_handle
* @type: Notify code
* @context: pointer to acpiphp_func structure
*
- * handles ACPI event notification on slots
- *
+ * Handles ACPI event notification on slots.
*/
static void handle_hotplug_event_func(acpi_handle handle, u32 type, void *context)
{
/**
* acpiphp_glue_init - initializes all PCI hotplug - ACPI glue data structures
- *
*/
int __init acpiphp_glue_init(void)
{
/**
* acpiphp_glue_exit - terminates all PCI hotplug - ACPI glue data structures
*
- * This function frees all data allocated in acpiphp_glue_init()
+ * This function frees all data allocated in acpiphp_glue_init().
*/
void acpiphp_glue_exit(void)
{
* acpiphp_for_each_slot - call function for each slot
* @fn: callback function
* @data: context to be passed to callback function
- *
*/
static int acpiphp_for_each_slot(acpiphp_callback fn, void *data)
{
/**
* acpiphp_enable_slot - power on slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_enable_slot(struct acpiphp_slot *slot)
{
/**
* acpiphp_disable_slot - power off slot
+ * @slot: ACPI PHP slot
*/
int acpiphp_disable_slot(struct acpiphp_slot *slot)
{
* ibm_slot_from_id - workaround for bad ibm hardware
* @id: the slot number that linux refers to the slot by
*
- * Description: this method returns the aCPI slot descriptor
+ * Description: This method returns the aCPI slot descriptor
* corresponding to the Linux slot number. This descriptor
* has info about the aPCI slot id and attention status.
* This descriptor must be freed using kfree when done.
- **/
+ */
static union apci_descriptor *ibm_slot_from_id(int id)
{
int ind = 0, size;
* @slot: the hotplug_slot to work with
* @status: what to set the LED to (0 or 1)
*
- * Description: this method is registered with the acpiphp module as a
- * callback to do the device specific task of setting the LED status
- **/
+ * Description: This method is registered with the acpiphp module as a
+ * callback to do the device specific task of setting the LED status.
+ */
static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
{
union acpi_object args[2];
* @slot: the hotplug_slot to work with
* @status: returns what the LED is set to (0 or 1)
*
- * Description: this method is registered with the acpiphp module as a
- * callback to do the device specific task of getting the LED status
+ * Description: This method is registered with the acpiphp module as a
+ * callback to do the device specific task of getting the LED status.
*
* Because there is no direct method of getting the LED status directly
* from an ACPI call, we read the aPCI table and parse out our
* slot descriptor to read the status from that.
- **/
+ */
static int ibm_get_attention_status(struct hotplug_slot *slot, u8 *status)
{
union apci_descriptor *ibm_slot;
* @event: the event info (device specific)
* @context: passed context (our notification struct)
*
- * Description: this method is registered as a callback with the ACPI
- * subsystem it is called when this device has an event to notify the OS of
+ * Description: This method is registered as a callback with the ACPI
+ * subsystem it is called when this device has an event to notify the OS of.
*
* The events actually come from the device as two events that get
* synthesized into one event with data by this function. The event
* From section 5.6.2.2 of the ACPI 2.0 spec, I understand that the OSPM will
* only re-enable the interrupt that causes this event AFTER this method
* has returned, thereby enforcing serial access for the notification struct.
- **/
+ */
static void ibm_handle_events(acpi_handle handle, u32 event, void *context)
{
u8 detail = event & 0x0f;
* ibm_get_table_from_acpi - reads the APLS buffer from ACPI
* @bufp: address to pointer to allocate for the table
*
- * Description: this method reads the APLS buffer in from ACPI and
+ * Description: This method reads the APLS buffer in from ACPI and
* stores the "stripped" table into a single buffer
- * it allocates and passes the address back in bufp
+ * it allocates and passes the address back in bufp.
*
* If NULL is passed in as buffer, this method only calculates
* the size of the table and returns that without filling
- * in the buffer
+ * in the buffer.
*
- * returns < 0 on error or the size of the table on success
- **/
+ * Returns < 0 on error or the size of the table on success.
+ */
static int ibm_get_table_from_acpi(char **bufp)
{
union acpi_object *package;
/**
* ibm_read_apci_table - callback for the sysfs apci_table file
* @kobj: the kobject this binary attribute is a part of
+ * @bin_attr: struct bin_attribute for this file
* @buffer: the kernel space buffer to fill
* @pos: the offset into the file
* @size: the number of bytes requested
*
- * Description: gets registered with sysfs as the reader callback
- * to be executed when /sys/bus/pci/slots/apci_table gets read
+ * Description: Gets registered with sysfs as the reader callback
+ * to be executed when /sys/bus/pci/slots/apci_table gets read.
*
* Since we don't get notified on open and close for this file,
* things get really tricky here...
- * our solution is to only allow reading the table in all at once
- **/
+ * our solution is to only allow reading the table in all at once.
+ */
static ssize_t ibm_read_apci_table(struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buffer, loff_t pos, size_t size)
* @context: a pointer to our handle to fill when we find the device
* @rv: a return value to fill if desired
*
- * Description: used as a callback when calling acpi_walk_namespace
+ * Description: Used as a callback when calling acpi_walk_namespace
* to find our device. When this method returns non-zero
- * acpi_walk_namespace quits its search and returns our value
- **/
+ * acpi_walk_namespace quits its search and returns our value.
+ */
static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
u32 lvl, void *context, void **rv)
{
/**
* detect_SMBIOS_pointer - find the System Management BIOS Table in mem region.
- *
* @begin: begin pointer for region to be scanned.
* @end: end pointer for region to be scanned.
*
- * Returns pointer to the head of the SMBIOS tables (or NULL)
- *
+ * Returns pointer to the head of the SMBIOS tables (or %NULL).
*/
static void __iomem * detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end)
{
/**
* init_SERR - Initializes the per slot SERR generation.
+ * @ctrl: controller to use
*
* For unexpected switch opens
- *
*/
static int init_SERR(struct controller * ctrl)
{
/**
* get_subsequent_smbios_entry: get the next entry from bios table.
- *
- * Gets the first entry if previous == NULL
- * Otherwise, returns the next entry
- * Uses global SMBIOS Table pointer
- *
+ * @smbios_start: where to start in the SMBIOS table
+ * @smbios_table: location of the SMBIOS table
* @curr: %NULL or pointer to previously returned structure
*
- * returns a pointer to an SMBIOS structure or NULL if none found
+ * Gets the first entry if previous == NULL;
+ * otherwise, returns the next entry.
+ * Uses global SMBIOS Table pointer.
+ *
+ * Returns a pointer to an SMBIOS structure or NULL if none found.
*/
static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
void __iomem *smbios_table,
/**
- * get_SMBIOS_entry
- *
- * @type:SMBIOS structure type to be returned
+ * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL
+ * @smbios_start: where to start in the SMBIOS table
+ * @smbios_table: location of the SMBIOS table
+ * @type: SMBIOS structure type to be returned
* @previous: %NULL or pointer to previously returned structure
*
- * Gets the first entry of the specified type if previous == NULL
+ * Gets the first entry of the specified type if previous == %NULL;
* Otherwise, returns the next entry of the given type.
- * Uses global SMBIOS Table pointer
- * Uses get_subsequent_smbios_entry
+ * Uses global SMBIOS Table pointer.
+ * Uses get_subsequent_smbios_entry.
*
- * returns a pointer to an SMBIOS structure or %NULL if none found
+ * Returns a pointer to an SMBIOS structure or %NULL if none found.
*/
static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
void __iomem *smbios_table,
/**
* cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
- *
+ * @ctrl: struct controller to use
+ * @func: PCI device/function info
+ * @status: LED control flag: 1 = LED on, 0 = LED off
*/
static int
cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
/**
* set_attention_status - Turns the Amber LED for a slot on or off
- *
+ * @hotplug_slot: slot to change LED on
+ * @status: LED control flag
*/
static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
}
/**
- * cpqhp_find_slot: find the struct slot of given device
+ * cpqhp_find_slot - find the struct slot of given device
* @ctrl: scan lots of this controller
* @device: the device id to find
*/
/**
- * sort_by_size: sort nodes on the list by their length, smallest first.
+ * sort_by_size - sort nodes on the list by their length, smallest first.
* @head: list to sort
- *
*/
static int sort_by_size(struct pci_resource **head)
{
/**
- * sort_by_max_size: sort nodes on the list by their length, largest first.
+ * sort_by_max_size - sort nodes on the list by their length, largest first.
* @head: list to sort
- *
*/
static int sort_by_max_size(struct pci_resource **head)
{
/**
- * do_pre_bridge_resource_split: find node of resources that are unused
- *
+ * do_pre_bridge_resource_split - find node of resources that are unused
+ * @head: new list head
+ * @orig_head: original list head
+ * @alignment: max node size (?)
*/
static struct pci_resource *do_pre_bridge_resource_split(struct pci_resource **head,
struct pci_resource **orig_head, u32 alignment)
/**
- * do_bridge_resource_split: find one node of resources that aren't in use
- *
+ * do_bridge_resource_split - find one node of resources that aren't in use
+ * @head: list head
+ * @alignment: max node size (?)
*/
static struct pci_resource *do_bridge_resource_split(struct pci_resource **head, u32 alignment)
{
/**
- * get_io_resource: find first node of given size not in ISA aliasing window.
+ * get_io_resource - find first node of given size not in ISA aliasing window.
* @head: list to search
* @size: size of node to find, must be a power of two.
*
- * Description: this function sorts the resource list by size and then returns
+ * Description: This function sorts the resource list by size and then returns
* returns the first node of "size" length that is not in the ISA aliasing
* window. If it finds a node larger than "size" it will split it up.
- *
*/
static struct pci_resource *get_io_resource(struct pci_resource **head, u32 size)
{
/**
- * get_max_resource: get largest node which has at least the given size.
+ * get_max_resource - get largest node which has at least the given size.
* @head: the list to search the node in
* @size: the minimum size of the node to find
*
/**
- * get_resource: find resource of given size and split up larger ones.
+ * get_resource - find resource of given size and split up larger ones.
* @head: the list to search for resources
* @size: the size limit to use
*
/**
- * cpqhp_resource_sort_and_combine: sort nodes by base addresses and clean up.
+ * cpqhp_resource_sort_and_combine - sort nodes by base addresses and clean up
* @head: the list to sort and clean up
*
* Description: Sorts all of the nodes in the list in ascending order by
* their base addresses. Also does garbage collection by
* combining adjacent nodes.
*
- * returns 0 if success
+ * Returns %0 if success.
*/
int cpqhp_resource_sort_and_combine(struct pci_resource **head)
{
/**
* cpqhp_slot_create - Creates a node and adds it to the proper bus.
- * @busnumber - bus where new node is to be located
+ * @busnumber: bus where new node is to be located
*
- * Returns pointer to the new node or NULL if unsuccessful
+ * Returns pointer to the new node or %NULL if unsuccessful.
*/
struct pci_func *cpqhp_slot_create(u8 busnumber)
{
* slot_remove - Removes a node from the linked list of slots.
* @old_slot: slot to remove
*
- * Returns 0 if successful, !0 otherwise.
+ * Returns %0 if successful, !0 otherwise.
*/
static int slot_remove(struct pci_func * old_slot)
{
* bridge_slot_remove - Removes a node from the linked list of slots.
* @bridge: bridge to remove
*
- * Returns 0 if successful, !0 otherwise.
+ * Returns %0 if successful, !0 otherwise.
*/
static int bridge_slot_remove(struct pci_func *bridge)
{
* cpqhp_slot_find - Looks for a node by bus, and device, multiple functions accessed
* @bus: bus to find
* @device: device to find
- * @index: is 0 for first function found, 1 for the second...
+ * @index: is %0 for first function found, %1 for the second...
*
* Returns pointer to the node if successful, %NULL otherwise.
*/
/**
- * set_controller_speed - set the frequency and/or mode of a specific
- * controller segment.
- *
+ * set_controller_speed - set the frequency and/or mode of a specific controller segment.
* @ctrl: controller to change frequency/mode for.
* @adapter_speed: the speed of the adapter we want to match.
* @hp_slot: the slot number where the adapter is installed.
*
- * Returns 0 if we successfully change frequency and/or mode to match the
+ * Returns %0 if we successfully change frequency and/or mode to match the
* adapter speed.
- *
*/
static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_slot)
{
/**
* board_replaced - Called after a board has been replaced in the system.
+ * @func: PCI device/function information
+ * @ctrl: hotplug controller
*
- * This is only used if we don't have resources for hot add
- * Turns power on for the board
- * Checks to see if board is the same
- * If board is same, reconfigures it
+ * This is only used if we don't have resources for hot add.
+ * Turns power on for the board.
+ * Checks to see if board is the same.
+ * If board is same, reconfigures it.
* If board isn't same, turns it back off.
- *
*/
static u32 board_replaced(struct pci_func *func, struct controller *ctrl)
{
/**
* board_added - Called after a board has been added to the system.
+ * @func: PCI device/function info
+ * @ctrl: hotplug controller
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static u32 board_added(struct pci_func *func, struct controller *ctrl)
{
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @func: PCI device/function info
+ * @replace_flag: whether replacing or adding a new device
+ * @ctrl: target controller
*/
static u32 remove_board(struct pci_func * func, u32 replace_flag, struct controller * ctrl)
{
/**
- * cpqhp_pushbutton_thread
+ * cpqhp_pushbutton_thread - handle pushbutton events
+ * @slot: target slot (struct)
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
void cpqhp_pushbutton_thread(unsigned long slot)
{
}
/**
- * switch_leds: switch the leds, go from one site to the other.
+ * switch_leds - switch the leds, go from one site to the other.
* @ctrl: controller to use
* @num_of_slots: number of slots to use
+ * @work_LED: LED control value
* @direction: 1 to start from the left side, 0 to start right.
*/
static void switch_leds(struct controller *ctrl, const int num_of_slots,
}
/**
- * hardware_test - runs hardware tests
+ * cpqhp_hardware_test - runs hardware tests
+ * @ctrl: target controller
+ * @test_num: the number written to the "test" file in sysfs.
*
* For hot plug ctrl folks to play with.
- * test_num is the number written to the "test" file in sysfs
- *
*/
int cpqhp_hardware_test(struct controller *ctrl, int test_num)
{
/**
* configure_new_device - Configures the PCI header information of one board.
- *
* @ctrl: pointer to controller structure
* @func: pointer to function structure
* @behind_bridge: 1 if this is a recursive call, 0 if not
* @resources: pointer to set of resource lists
*
- * Returns 0 if success
- *
+ * Returns 0 if success.
*/
static u32 configure_new_device(struct controller * ctrl, struct pci_func * func,
u8 behind_bridge, struct resource_lists * resources)
/**
* configure_new_function - Configures the PCI header information of one device
- *
* @ctrl: pointer to controller structure
* @func: pointer to function structure
* @behind_bridge: 1 if this is a recursive call, 0 if not
* @resources: pointer to set of resource lists
*
* Calls itself recursively for bridged devices.
- * Returns 0 if success
- *
+ * Returns 0 if success.
*/
static int configure_new_function(struct controller *ctrl, struct pci_func *func,
u8 behind_bridge,
}
/**
- * Rescan slot.
- * Tries hard not to re-enable already existing devices
- * also handles scanning of subfunctions
+ * pci_rescan_slot - Rescan slot
+ * @temp: Device template. Should be set: bus and devfn.
*
- * @param temp Device template. Should be set: bus and devfn.
+ * Tries hard not to re-enable already existing devices;
+ * also handles scanning of subfunctions.
*/
static void pci_rescan_slot(struct pci_dev *temp)
{
/**
- * Rescan PCI bus.
- * call pci_rescan_slot for each possible function of the bus
+ * pci_rescan_bus - Rescan PCI bus
+ * @bus: the PCI bus to rescan
*
- * @param bus
+ * Call pci_rescan_slot for each possible function of the bus.
*/
static void pci_rescan_bus(const struct pci_bus *bus)
{
/**
* board_added - Called after a board has been added to the system.
+ * @p_slot: &slot where board is added
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static int board_added(struct slot *p_slot)
{
}
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @p_slot: slot where board is being removed
*/
static int remove_board(struct slot *p_slot)
{
};
/**
- * pciehp_pushbutton_thread
+ * pciehp_power_thread - handle pushbutton events
+ * @work: &struct work_struct describing work to be done
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
static void pciehp_power_thread(struct work_struct *work)
{
/**
* find_php_slot - return hotplug slot structure for device node
+ * @dn: target &device_node
*
* This routine will return the hotplug slot structure
* for a given device node. Note that built-in PCI slots
* dlpar_add_slot - DLPAR add an I/O Slot
* @drc_name: drc-name of newly added slot
*
- * Make the hotplug module and the kernel aware
- * of a newly added I/O Slot.
- * Return Codes -
+ * Make the hotplug module and the kernel aware of a newly added I/O Slot.
+ * Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
* -EINVAL Slot already added
/**
* dlpar_remove_vio_slot - DLPAR remove a virtual I/O Slot
* @drc_name: drc-name of newly added slot
+ * @dn: &device_node
*
- * Remove the kernel and hotplug representations
- * of an I/O Slot.
+ * Remove the kernel and hotplug representations of an I/O Slot.
* Return Codes:
* 0 Success
* -EINVAL Vio dev doesn't exist
}
/**
- * dlpar_remove_slot - DLPAR remove a PCI I/O Slot
+ * dlpar_remove_pci_slot - DLPAR remove a PCI I/O Slot
* @drc_name: drc-name of newly added slot
+ * @dn: &device_node
*
- * Remove the kernel and hotplug representations
- * of a PCI I/O Slot.
+ * Remove the kernel and hotplug representations of a PCI I/O Slot.
* Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
* dlpar_remove_slot - DLPAR remove an I/O Slot
* @drc_name: drc-name of newly added slot
*
- * Remove the kernel and hotplug representations
- * of an I/O Slot.
+ * Remove the kernel and hotplug representations of an I/O Slot.
* Return Codes:
* 0 Success
* -ENODEV Not a valid drc_name
/**
* set_attention_status - set attention LED
+ * @hotplug_slot: target &hotplug_slot
+ * @value: LED control value
+ *
* echo 0 > attention -- set LED OFF
* echo 1 > attention -- set LED ON
* echo 2 > attention -- set LED ID(identify, light is blinking)
- *
*/
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
{
/**
* get_attention_status - get attention LED status
+ * @hotplug_slot: slot to get status
+ * @value: pointer to store status
*/
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value)
{
/**
* is_php_dn() - return 1 if this is a hotpluggable pci slot, else 0
+ * @dn: target &device_node
+ * @indexes: passed to get_children_props()
+ * @names: passed to get_children_props()
+ * @types: returned from get_children_props()
+ * @power_domains:
*
* This routine will return true only if the device node is
* a hotpluggable slot. This routine will return false
/**
* rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
- * @dn device node of slot
+ * @dn: device node of slot
*
* This subroutine will register a hotplugable slot with the
* PCI hotplug infrastructure. This routine is typicaly called
* routine will just return without doing anything, since embedded
* slots cannot be hotplugged.
*
- * To remove a slot, it suffices to call rpaphp_deregister_slot()
+ * To remove a slot, it suffices to call rpaphp_deregister_slot().
*/
int rpaphp_add_slot(struct device_node *dn)
{
/**
* rpaphp_enable_slot - record slot state, config pci device
+ * @slot: target &slot
*
* Initialize values in the slot, and the hotplug_slot info
* structures to indicate if there is a pci card plugged into
/**
* board_added - Called after a board has been added to the system.
+ * @p_slot: target &slot
*
- * Turns power on for the board
- * Configures board
- *
+ * Turns power on for the board.
+ * Configures board.
*/
static int board_added(struct slot *p_slot)
{
/**
- * remove_board - Turns off slot and LED's
- *
+ * remove_board - Turns off slot and LEDs
+ * @p_slot: target &slot
*/
static int remove_board(struct slot *p_slot)
{
};
/**
- * shpchp_pushbutton_thread
+ * shpchp_pushbutton_thread - handle pushbutton events
+ * @work: &struct work_struct to be handled
*
- * Scheduled procedure to handle blocking stuff for the pushbuttons
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
* Handles all pending events and exits.
- *
*/
static void shpchp_pushbutton_thread(struct work_struct *work)
{
projects / openwrt / staging / blogic.git / commitdiff