Staging: w35und: replace switch error handling with gotos in wb35_hw_init()

Impact: cleanup

This patch replaces the switch-based error handling in wb35_hw_init()
with regular gotos.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index cf176bd3f6663dec3a8c54cb61849e3d8d1b8c7f..161542d0945ae50668960b6c224a2ee876844c44 100644 (file)
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -178,15 +178,15 @@ static const struct ieee80211_ops wbsoft_ops = {
 // conf_tx: hal_set_cwmin()/hal_set_cwmax;
 };
 
-static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
+static int wb35_hw_init(struct ieee80211_hw *hw)
 {
        struct wbsoft_priv *priv = hw->priv;
        struct hw_data *        pHwData;
        u8              *pMacAddr;
        u8              *pMacAddr2;
-       u32             InitStep = 0;
        u8              EEPROM_region;
        u8              HwRadioOff;
+       int err;
 
        //
        // Setting default value for Linux
@@ -209,10 +209,11 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
        priv->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds
 
        // Initial USB hal
-       InitStep = 1;
        pHwData = &priv->sHwData;
-       if (!hal_init_hardware(hw))
+       if (!hal_init_hardware(hw)) {
+               err = -EINVAL;
                goto error;
+       }
 
        EEPROM_region = hal_get_region_from_EEPROM( pHwData );
        if (EEPROM_region != REGION_AUTO)
@@ -229,21 +230,12 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
        if (hal_software_set(pHwData) & 0x00000001)
                priv->sLocalPara.boAntennaDiversity = true;
 
-       //
-       // For TS module
-       //
-       InitStep = 2;
-
        // For MDS module
-       InitStep = 3;
        Mds_initial(priv);
 
        //=======================================
        // Initialize the SME, SCAN, MLME, ROAM
        //=======================================
-       InitStep = 4;
-       InitStep = 5;
-       InitStep = 6;
 
        // If no user-defined address in the registry, use the addresss "burned" on the NIC instead.
        pMacAddr = priv->sLocalPara.ThisMacAddress;
@@ -277,19 +269,12 @@ static unsigned char wb35_hw_init(struct ieee80211_hw *hw)
        hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now.
        //set a tx power for reference.....
 //     sme_set_tx_power_level(priv, 12);       FIXME?
-       return true;
+       return 0;
 
 error:
-       switch (InitStep) {
-       case 5:
-       case 4:
-       case 3: Mds_Destroy( priv );
-       case 2:
-       case 1: hal_halt( pHwData, NULL );
-       case 0: break;
-       }
+       hal_halt(pHwData, NULL);
 
-       return false;
+       return err;
 }
 
 static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table)
@@ -341,10 +326,9 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
                pWbUsb->IsUsb20 = 1;
        }
 
-       if (!wb35_hw_init(dev)) {
-               err = -EINVAL;
+       err = wb35_hw_init(dev);
+       if (err)
                goto error_free_hw;
-       }
 
        SET_IEEE80211_DEV(dev, &udev->dev);
        {