ARM: dts: imx27 phycore pinctrl

Add pinctrl nodes and properties for phycore device nodes.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index ad76d88a90ff2fbaa4f2df8fd0fc7d0cab92e489..959dddf60d1f139253f7d661608a785e5130b7a9 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,6 +19,28 @@
        cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
 };
 
+&iomuxc {
+       imx27_phycore_rdk {
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX27_PAD_UART1_TXD__UART1_TXD 0x0
+                               MX27_PAD_UART1_RXD__UART1_RXD 0x0
+                               MX27_PAD_UART1_CTS__UART1_CTS 0x0
+                               MX27_PAD_UART1_RTS__UART1_RTS 0x0
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX27_PAD_UART2_TXD__UART2_TXD 0x0
+                               MX27_PAD_UART2_RXD__UART2_RXD 0x0
+                               MX27_PAD_UART2_CTS__UART2_CTS 0x0
+                               MX27_PAD_UART2_RTS__UART2_RTS 0x0
+                       >;
+               };
+       };
+};
+
 &sdhci2 {
        bus-width = <4>;
        cd-gpios = <&gpio3 29 0>;
@@ -29,11 +51,15 @@
 
 &uart1 {
        fsl,uart-has-rtscts;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
        status = "okay";
 };
 
 &uart2 {
        fsl,uart-has-rtscts;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
        status = "okay";
 };
 

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
index 648541a33e8d163eb525960c5b2aef48acb04b64..87719288d0ea144992e7672836e0c9450d474fdb 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -135,11 +135,15 @@
 
 &fec {
        phy-reset-gpios = <&gpio3 30 0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_fec1>;
        status = "okay";
 };
 
 &i2c2 {
        clock-frequency = <400000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
        status = "okay";
 
        at24@52 {
@@ -159,6 +163,41 @@
        };
 };
 
+&iomuxc {
+       imx27_phycore_som {
+               pinctrl_fec1: fec1grp {
+                       fsl,pins = <
+                               MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+                               MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+                               MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+                               MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+                               MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+                               MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+                               MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+                               MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+                               MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+                               MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+                               MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+                               MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+                               MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+                               MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+                               MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+                               MX27_PAD_ATA_DATA13__FEC_COL 0x0
+                               MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+                               MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+                               MX27_PAD_SSI3_TXDAT__GPIO3_30   0x0 /* FEC RST */
+                       >;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+                               MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+                       >;
+               };
+       };
+};
+
 &nfc {
        nand-bus-width = <8>;
        nand-ecc-mode = "hw";