+++ /dev/null
-/*
- * (C) Copyright 2008-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_KEYMILE_H
-#define __CONFIG_KEYMILE_H
-
-/* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-/*
- * By default kwbimage.cfg from board specific folder is used
- * If for some board, different configuration file need to be used,
- * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
- */
-#ifndef CONFIG_SYS_KWD_CONFIG
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
-#endif /* CONFIG_SYS_KWD_CONFIG */
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_SETEXPR
-
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_HUSH_INIT_VAR
-
-#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
-
-#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_LOADS_ECHO
-#define CONFIG_SYS_LOADS_BAUD_CHANGE
-#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
-
-/*
- * How to get access to the slot ID. Put this here to make it easy
- * to modify in a centralized location. This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_CHECK_ETHERNET_PRESENT
-#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE
-#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
-
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS 1
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MUX
-
-/* EEprom support */
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* Support the IVM EEprom */
-#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
-
-#define CONFIG_SYS_FLASH_PROTECTION
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-/* UBI Support for all Keymile boards */
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_CONCAT
-
-/* common powerpc specific env settings */
-#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
-#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
- "bootparams=empty\0" \
- "initial_boot_bank=0\0"
-#endif
-
-#ifndef CONFIG_KM_DEF_NETDEV
-#define CONFIG_KM_DEF_NETDEV \
- "netdev=eth0\0"
-#endif
-
-#ifndef CONFIG_KM_UBI_PARTITION_NAME
-#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
-#endif
-#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME
-#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0"
-#endif
-
-#define xstr(s) str(s)
-#define str(s) #s
-
-/*
- * bootrunner
- * - run all commands in 'subbootcmds'
- * - on error, stop running the remaing commands
- */
-#define CONFIG_KM_DEF_ENV_BOOTRUNNER \
- "bootrunner=" \
- "break=0; " \
- "for subbootcmd in ${subbootcmds}; do " \
- "if test ${break} -eq 0; then; " \
- "echo \"[INFO] running \\c\"; " \
- "print ${subbootcmd}; " \
- "run ${subbootcmd} || break=1; " \
- "if test ${break} -eq 1; then; " \
- "echo \"[ERR] failed \\c\"; " \
- "print ${subbootcmd}; " \
- "fi; " \
- "fi; " \
- "done\0" \
- ""
-
-/*
- * boottargets
- * - set 'subbootcmds' for the bootrunner
- * - set 'bootcmd' and 'altbootcmd'
- * available targets:
- * - 'release': for a standalone system kernel/rootfs from flash
- * - 'develop': for development kernel(tftp)/rootfs(NFS)
- * - 'ramfs': rootfilesystem in RAM kernel(tftp)/rootfs(RAM)
- *
- * - 'commonargs': bootargs common to all targets
- */
-#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
- "commonargs=" \
- "addip " \
- "addtty " \
- "addmem " \
- "addinit " \
- "addvar " \
- "addmtdparts " \
- "addbootcount " \
- "\0" \
- "develop=" \
- "setenv subbootcmds \"" \
- "tftpfdt tftpkernel " \
- "nfsargs ${commonargs} " \
- "printbootargs boot " \
- "\" && " \
- "setenv bootcmd \'" \
- "run bootrunner" \
- "\' && " \
- "setenv altbootcmd \'" \
- "run bootcmd" \
- "\' && " \
- "run setboardid && " \
- "saveenv && " \
- "reset\0" \
- "ramfs=" \
- "setenv actual_bank -1 && " \
- "setenv subbootcmds \"" \
- "tftpfdt tftpkernel " \
- "setrootfsaddr tftpramfs " \
- "flashargs ${commonargs} " \
- "addpanic addramfs " \
- "printbootargs boot " \
- "\" && " \
- "setenv bootcmd \'" \
- "run bootrunner" \
- "\' && " \
- "setenv altbootcmd \'" \
- "run bootcmd" \
- "\' && " \
- "run setboardid && " \
- "run setramfspram && " \
- "saveenv && " \
- "reset\0" \
- "release=" \
- "setenv actual_bank ${initial_boot_bank} && " \
- "setenv subbootcmds \"" \
- "checkboardidlist " \
- "checkboardid " \
- "ubiattach ubicopy " \
- "cramfsloadfdt cramfsloadkernel " \
- "flashargs ${commonargs} " \
- "addpanic " \
- "printbootargs boot " \
- "\" && " \
- "setenv bootcmd \'" \
- "run actual bootrunner; reset" \
- "\' && " \
- "setenv altbootcmd \'" \
- "run backup bootrunner; reset" \
- "\' && " \
- "saveenv && " \
- "reset\0" \
- ""
-
-/*
- * bootargs
- * - modify 'bootargs'
- *
- * - 'addip': add ip configuration
- * - 'addmem': limit kernel memory mem=
- * - 'addpanic': add kernel panic options
- * - 'addramfs': add phram device for the rootfilesysten in ram
- * - 'addtty': add console=...
- * - 'addvar': add phram device for /var
- * - 'nfsargs': default arguments for nfs boot
- * - 'flashargs': defaults arguments for flash base boot
- *
- * processor specific settings
- * - 'addbootcount': add boot counter
- * - 'addmtdparts': add mtd partition information
- */
-#define CONFIG_KM_DEF_ENV_BOOTARGS \
- "addinit=" \
- "setenv bootargs ${bootargs} init=${init}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off\0" \
- "addmem=" \
- "setenv bootargs ${bootargs} mem=0x${pnvramaddr}\0" \
- "addpanic=" \
- "setenv bootargs ${bootargs} " \
- "panic=1 panic_on_oops=1\0" \
- "addramfs=" \
- "setenv bootargs \"" \
- "${bootargs} phram.phram=" \
- "rootfs${boot_bank},${rootfsaddr},${rootfssize}\"\0" \
- "addtty=" \
- "setenv bootargs ${bootargs}" \
- " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \
- "addvar=" \
- "setenv bootargs ${bootargs} phram.phram=phvar," \
- "${varaddr},0x" xstr(CONFIG_KM_PHRAM) "\0" \
- "nfsargs=" \
- "setenv bootargs " \
- "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
- "root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "flashargs=" \
- "setenv bootargs " \
- "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
- "root=mtdblock:rootfs${boot_bank} " \
- "rootfstype=squashfs ro\0" \
- ""
-
-/*
- * compute_addr
- * - compute addresses and sizes
- * - addresses are calculated form the end of memory 'memsize'
- *
- * - 'setramfspram': compute PRAM size for ramfs target
- * - 'setrootfsaddr': compute rootfilesystem address for phram
- */
-#define CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
- "setboardid=" \
- "if test \"x${boardId}\" = \"x\"; then; " \
- "setenv boardId ${IVM_BoardId} && " \
- "setenv hwKey ${IVM_HWKey}; " \
- "else; " \
- "echo \\\\c; " \
- "fi\0" \
- "setramfspram=" \
- "setexpr value ${rootfssize} / 0x400 && " \
- "setexpr value 0x${value} + ${pram} && " \
- "setenv pram 0x${value}\0" \
- "setrootfsaddr=" \
- "setexpr value ${pnvramaddr} - ${rootfssize} && " \
- "setenv rootfsaddr 0x${value}\0" \
- ""
-
-/*
- * flash_boot
- * - commands for booting from flash
- *
- * - 'cramfsaddr': address to the cramfs (in ram)
- * - 'cramfsloadkernel': copy kernel from a cramfs to ram
- * - 'ubiattach': attach ubi partition
- * - 'ubicopy': copy ubi volume to ram
- * - volume names: bootfs0, bootfs1, bootfs2, ...
- * - 'ubiparition': mtd parition name for ubi
- *
- * processor specific settings
- * - 'cramfsloadfdt': copy fdt from a cramfs to ram
- */
-#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
- "cramfsaddr="xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
- "cramfsloadkernel=" \
- "cramfsload ${kernel_addr_r} uImage && " \
- "setenv actual_kernel_addr ${kernel_addr_r}\0" \
- "ubiattach=ubi part ${ubipartition}\0" \
- "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \
- "ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \
- ""
-
-/*
- * net_boot
- * - commands for booting over the network
- *
- * - 'tftpkernel': load a kernel with tftp into ram
- * - 'tftpramfs': load rootfs with tftp into ram
- *
- * processor specific settings
- * - 'tftpfdt': load fdt with tftp into ram
- */
-#define CONFIG_KM_DEF_ENV_NET_BOOT \
- "tftpkernel=" \
- "tftpboot ${kernel_addr_r} ${kernel_file} && " \
- "setenv actual_kernel_addr ${kernel_addr_r}\0" \
- "tftpramfs=" \
- "tftpboot ${rootfsaddr} \"\\\"${rootfsfile}\\\"\" && " \
- "setenv loadaddr\0" \
- ""
-
-/*
- * constants
- * - KM specific constants and commands
- *
- * - 'default': setup default environment
- */
-#define CONFIG_KM_DEF_ENV_CONSTANTS \
- "actual=setenv boot_bank ${actual_bank}\0" \
- "backup=setenv boot_bank ${backup_bank}\0" \
- "actual_bank=${initial_boot_bank}\0" \
- "backup_bank=0\0" \
- "default=" \
- "setenv default 'run newenv; reset' && " \
- "run release && saveenv; reset\0" \
- "checkboardidlist=" \
- "if test \"x${boardIdListHex}\" != \"x\"; then " \
- "IVMbidhwk=${IVM_BoardId}_${IVM_HWKey}; " \
- "found=0; " \
- "for bidhwk in \"${boardIdListHex}\"; do " \
- "echo trying $bidhwk ...; " \
- "if test \"x$bidhwk\" = \"x$IVMbidhwk\"; then " \
- "found=1; " \
- "echo match found for $bidhwk; " \
- "if test \"x$bidhwk\" != \"x${boardId}_${hwKey}\";then "\
- "setenv boardid ${IVM_BoardId}; " \
- "setenv boardId ${IVM_BoardId}; " \
- "setenv hwkey ${IVM_HWKey}; " \
- "setenv hwKey ${IVM_HWKey}; " \
- "echo \"boardId set to ${boardId}\"; " \
- "echo \"hwKey set to ${hwKey}\"; " \
- "saveenv; " \
- "fi; " \
- "fi; " \
- "done; " \
- "else " \
- "echo \"boardIdListHex not set, not checked\"; "\
- "found=1; " \
- "fi; " \
- "test \"$found\" = 1 \0" \
- "checkboardid=" \
- "test \"x${boardId}\" = \"x${IVM_BoardId}\" && " \
- "test \"x${hwKey}\" = \"x${IVM_HWKey}\"\0" \
- "printbootargs=print bootargs\0" \
- "rootfsfile="xstr(CONFIG_HOSTNAME) "/rootfsImage\0" \
- ""
-
-#ifndef CONFIG_KM_DEF_ENV
-#define CONFIG_KM_DEF_ENV \
- CONFIG_KM_DEF_ENV_BOOTPARAMS \
- CONFIG_KM_DEF_NETDEV \
- CONFIG_KM_DEF_ENV_CPU \
- CONFIG_KM_DEF_ENV_BOOTRUNNER \
- CONFIG_KM_DEF_ENV_BOOTTARGETS \
- CONFIG_KM_DEF_ENV_BOOTARGS \
- CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
- CONFIG_KM_DEF_ENV_FLASH_BOOT \
- CONFIG_KM_DEF_ENV_NET_BOOT \
- CONFIG_KM_DEF_ENV_CONSTANTS \
- "altbootcmd=run bootcmd\0" \
- "bootcmd=run default\0" \
- "bootlimit=2\0" \
- "init=/sbin/init-overlay.sh\0" \
- "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
- "kernel_file="xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "kernel_name=uImage\0" \
- "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \
- "mtdids=" MTDIDS_DEFAULT "\0" \
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
- "stderr=serial\0" \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
- "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
- ""
-#endif /* CONFIG_KM_DEF_ENV */
-
-#define CONFIG_VERSION_VARIABLE /* include version env variable */
-
-#endif /* __CONFIG_KEYMILE_H */
+++ /dev/null
-/*
- * (C) Copyright 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_KEYMILE_POWERPC_H
-#define __CONFIG_KEYMILE_POWERPC_H
-
-#define CONFIG_BOOTCOUNT_LIMIT
-
-#define CONFIG_CMD_DTT
-#define CONFIG_JFFS2_CMDLINE
-
-#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
-#define CONFIG_FLASH_CFI_MTD
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-
-#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-/******************************************************************************
- * (PRAM usage)
- * ... -------------------------------------------------------
- * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
- * ... |<------------------- pram -------------------------->|
- * ... -------------------------------------------------------
- * @END_OF_RAM:
- * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
- * @CONFIG_KM_PHRAM: address for /var
- * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
- * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
- */
-
-/* size of rootfs in RAM */
-#define CONFIG_KM_ROOTFSSIZE 0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM 0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM 0x100000
-/* resereved pram area at the end of memroy [hex] */
-#define CONFIG_KM_RESERVED_PRAM 0x0
-/* enable protected RAM */
-#define CONFIG_PRAM 0
-
-#define CONFIG_KM_CRAMFS_ADDR 0x800000
-#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 3968Kbytes */
-#define CONFIG_KM_FDT_ADDR 0x7E0000 /* 128Kbytes */
-
-#define CONFIG_KM_DEF_ENV_CPU \
- "addbootcount=echo \\\\c\0" \
- "addmtdparts=echo \\\\c\0" \
- "boot=bootm ${actual_kernel_addr} - ${actual_fdt_addr}\0" \
- "cramfsloadfdt=" \
- "cramfsload ${fdt_addr_r} " \
- "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb && " \
- "setenv actual_fdt_addr ${fdt_addr_r}\0" \
- "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \
- "fdt_file=" \
- xstr(CONFIG_HOSTNAME) "/" \
- xstr(CONFIG_HOSTNAME) ".dtb\0" \
- "tftpfdt=" \
- "tftpboot ${fdt_addr_r} ${fdt_file} && " \
- "setenv actual_fdt_addr ${fdt_addr_r} \0" \
- "update=" \
- "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\
- "erase " xstr(BOOTFLASH_START) " +${filesize} && " \
- "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \
- " ${filesize} && " \
- "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
- ""
-
-#endif /* __CONFIG_KEYMILE_POWERPC_H */
--- /dev/null
+/*
+ * (C) Copyright 2008-2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_KEYMILE_H
+#define __CONFIG_KEYMILE_H
+
+/* Do boardspecific init for all boards */
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_LAST_STAGE_INIT
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+/*
+ * By default kwbimage.cfg from board specific folder is used
+ * If for some board, different configuration file need to be used,
+ * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
+ */
+#ifndef CONFIG_SYS_KWD_CONFIG
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage.cfg
+#endif /* CONFIG_SYS_KWD_CONFIG */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SETEXPR
+
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_HUSH_INIT_VAR
+
+#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
+
+#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CONFIG_LOADS_ECHO
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
+
+/*
+ * How to get access to the slot ID. Put this here to make it easy
+ * to modify in a centralized location. This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_CHECK_ETHERNET_PRESENT
+#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE
+#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 1
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MUX
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* Support the IVM EEprom */
+#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
+#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
+#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
+
+#define CONFIG_SYS_FLASH_PROTECTION
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+/* UBI Support for all Keymile boards */
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_CONCAT
+
+/* common powerpc specific env settings */
+#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
+#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ "bootparams=empty\0" \
+ "initial_boot_bank=0\0"
+#endif
+
+#ifndef CONFIG_KM_DEF_NETDEV
+#define CONFIG_KM_DEF_NETDEV \
+ "netdev=eth0\0"
+#endif
+
+#ifndef CONFIG_KM_UBI_PARTITION_NAME
+#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
+#endif
+#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME
+#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0"
+#endif
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+/*
+ * bootrunner
+ * - run all commands in 'subbootcmds'
+ * - on error, stop running the remaing commands
+ */
+#define CONFIG_KM_DEF_ENV_BOOTRUNNER \
+ "bootrunner=" \
+ "break=0; " \
+ "for subbootcmd in ${subbootcmds}; do " \
+ "if test ${break} -eq 0; then; " \
+ "echo \"[INFO] running \\c\"; " \
+ "print ${subbootcmd}; " \
+ "run ${subbootcmd} || break=1; " \
+ "if test ${break} -eq 1; then; " \
+ "echo \"[ERR] failed \\c\"; " \
+ "print ${subbootcmd}; " \
+ "fi; " \
+ "fi; " \
+ "done\0" \
+ ""
+
+/*
+ * boottargets
+ * - set 'subbootcmds' for the bootrunner
+ * - set 'bootcmd' and 'altbootcmd'
+ * available targets:
+ * - 'release': for a standalone system kernel/rootfs from flash
+ * - 'develop': for development kernel(tftp)/rootfs(NFS)
+ * - 'ramfs': rootfilesystem in RAM kernel(tftp)/rootfs(RAM)
+ *
+ * - 'commonargs': bootargs common to all targets
+ */
+#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ "commonargs=" \
+ "addip " \
+ "addtty " \
+ "addmem " \
+ "addinit " \
+ "addvar " \
+ "addmtdparts " \
+ "addbootcount " \
+ "\0" \
+ "develop=" \
+ "setenv subbootcmds \"" \
+ "tftpfdt tftpkernel " \
+ "nfsargs ${commonargs} " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run bootrunner" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run bootcmd" \
+ "\' && " \
+ "run setboardid && " \
+ "saveenv && " \
+ "reset\0" \
+ "ramfs=" \
+ "setenv actual_bank -1 && " \
+ "setenv subbootcmds \"" \
+ "tftpfdt tftpkernel " \
+ "setrootfsaddr tftpramfs " \
+ "flashargs ${commonargs} " \
+ "addpanic addramfs " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run bootrunner" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run bootcmd" \
+ "\' && " \
+ "run setboardid && " \
+ "run setramfspram && " \
+ "saveenv && " \
+ "reset\0" \
+ "release=" \
+ "setenv actual_bank ${initial_boot_bank} && " \
+ "setenv subbootcmds \"" \
+ "checkboardidlist " \
+ "checkboardid " \
+ "ubiattach ubicopy " \
+ "cramfsloadfdt cramfsloadkernel " \
+ "flashargs ${commonargs} " \
+ "addpanic " \
+ "printbootargs boot " \
+ "\" && " \
+ "setenv bootcmd \'" \
+ "run actual bootrunner; reset" \
+ "\' && " \
+ "setenv altbootcmd \'" \
+ "run backup bootrunner; reset" \
+ "\' && " \
+ "saveenv && " \
+ "reset\0" \
+ ""
+
+/*
+ * bootargs
+ * - modify 'bootargs'
+ *
+ * - 'addip': add ip configuration
+ * - 'addmem': limit kernel memory mem=
+ * - 'addpanic': add kernel panic options
+ * - 'addramfs': add phram device for the rootfilesysten in ram
+ * - 'addtty': add console=...
+ * - 'addvar': add phram device for /var
+ * - 'nfsargs': default arguments for nfs boot
+ * - 'flashargs': defaults arguments for flash base boot
+ *
+ * processor specific settings
+ * - 'addbootcount': add boot counter
+ * - 'addmtdparts': add mtd partition information
+ */
+#define CONFIG_KM_DEF_ENV_BOOTARGS \
+ "addinit=" \
+ "setenv bootargs ${bootargs} init=${init}\0" \
+ "addip=" \
+ "setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off\0" \
+ "addmem=" \
+ "setenv bootargs ${bootargs} mem=0x${pnvramaddr}\0" \
+ "addpanic=" \
+ "setenv bootargs ${bootargs} " \
+ "panic=1 panic_on_oops=1\0" \
+ "addramfs=" \
+ "setenv bootargs \"" \
+ "${bootargs} phram.phram=" \
+ "rootfs${boot_bank},${rootfsaddr},${rootfssize}\"\0" \
+ "addtty=" \
+ "setenv bootargs ${bootargs}" \
+ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \
+ "addvar=" \
+ "setenv bootargs ${bootargs} phram.phram=phvar," \
+ "${varaddr},0x" xstr(CONFIG_KM_PHRAM) "\0" \
+ "nfsargs=" \
+ "setenv bootargs " \
+ "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
+ "root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "flashargs=" \
+ "setenv bootargs " \
+ "ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
+ "root=mtdblock:rootfs${boot_bank} " \
+ "rootfstype=squashfs ro\0" \
+ ""
+
+/*
+ * compute_addr
+ * - compute addresses and sizes
+ * - addresses are calculated form the end of memory 'memsize'
+ *
+ * - 'setramfspram': compute PRAM size for ramfs target
+ * - 'setrootfsaddr': compute rootfilesystem address for phram
+ */
+#define CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
+ "setboardid=" \
+ "if test \"x${boardId}\" = \"x\"; then; " \
+ "setenv boardId ${IVM_BoardId} && " \
+ "setenv hwKey ${IVM_HWKey}; " \
+ "else; " \
+ "echo \\\\c; " \
+ "fi\0" \
+ "setramfspram=" \
+ "setexpr value ${rootfssize} / 0x400 && " \
+ "setexpr value 0x${value} + ${pram} && " \
+ "setenv pram 0x${value}\0" \
+ "setrootfsaddr=" \
+ "setexpr value ${pnvramaddr} - ${rootfssize} && " \
+ "setenv rootfsaddr 0x${value}\0" \
+ ""
+
+/*
+ * flash_boot
+ * - commands for booting from flash
+ *
+ * - 'cramfsaddr': address to the cramfs (in ram)
+ * - 'cramfsloadkernel': copy kernel from a cramfs to ram
+ * - 'ubiattach': attach ubi partition
+ * - 'ubicopy': copy ubi volume to ram
+ * - volume names: bootfs0, bootfs1, bootfs2, ...
+ * - 'ubiparition': mtd parition name for ubi
+ *
+ * processor specific settings
+ * - 'cramfsloadfdt': copy fdt from a cramfs to ram
+ */
+#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ "cramfsaddr="xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
+ "cramfsloadkernel=" \
+ "cramfsload ${kernel_addr_r} uImage && " \
+ "setenv actual_kernel_addr ${kernel_addr_r}\0" \
+ "ubiattach=ubi part ${ubipartition}\0" \
+ "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \
+ "ubipartition=" CONFIG_KM_UBI_PARTITION_NAME "\0" \
+ ""
+
+/*
+ * net_boot
+ * - commands for booting over the network
+ *
+ * - 'tftpkernel': load a kernel with tftp into ram
+ * - 'tftpramfs': load rootfs with tftp into ram
+ *
+ * processor specific settings
+ * - 'tftpfdt': load fdt with tftp into ram
+ */
+#define CONFIG_KM_DEF_ENV_NET_BOOT \
+ "tftpkernel=" \
+ "tftpboot ${kernel_addr_r} ${kernel_file} && " \
+ "setenv actual_kernel_addr ${kernel_addr_r}\0" \
+ "tftpramfs=" \
+ "tftpboot ${rootfsaddr} \"\\\"${rootfsfile}\\\"\" && " \
+ "setenv loadaddr\0" \
+ ""
+
+/*
+ * constants
+ * - KM specific constants and commands
+ *
+ * - 'default': setup default environment
+ */
+#define CONFIG_KM_DEF_ENV_CONSTANTS \
+ "actual=setenv boot_bank ${actual_bank}\0" \
+ "backup=setenv boot_bank ${backup_bank}\0" \
+ "actual_bank=${initial_boot_bank}\0" \
+ "backup_bank=0\0" \
+ "default=" \
+ "setenv default 'run newenv; reset' && " \
+ "run release && saveenv; reset\0" \
+ "checkboardidlist=" \
+ "if test \"x${boardIdListHex}\" != \"x\"; then " \
+ "IVMbidhwk=${IVM_BoardId}_${IVM_HWKey}; " \
+ "found=0; " \
+ "for bidhwk in \"${boardIdListHex}\"; do " \
+ "echo trying $bidhwk ...; " \
+ "if test \"x$bidhwk\" = \"x$IVMbidhwk\"; then " \
+ "found=1; " \
+ "echo match found for $bidhwk; " \
+ "if test \"x$bidhwk\" != \"x${boardId}_${hwKey}\";then "\
+ "setenv boardid ${IVM_BoardId}; " \
+ "setenv boardId ${IVM_BoardId}; " \
+ "setenv hwkey ${IVM_HWKey}; " \
+ "setenv hwKey ${IVM_HWKey}; " \
+ "echo \"boardId set to ${boardId}\"; " \
+ "echo \"hwKey set to ${hwKey}\"; " \
+ "saveenv; " \
+ "fi; " \
+ "fi; " \
+ "done; " \
+ "else " \
+ "echo \"boardIdListHex not set, not checked\"; "\
+ "found=1; " \
+ "fi; " \
+ "test \"$found\" = 1 \0" \
+ "checkboardid=" \
+ "test \"x${boardId}\" = \"x${IVM_BoardId}\" && " \
+ "test \"x${hwKey}\" = \"x${IVM_HWKey}\"\0" \
+ "printbootargs=print bootargs\0" \
+ "rootfsfile="xstr(CONFIG_HOSTNAME) "/rootfsImage\0" \
+ ""
+
+#ifndef CONFIG_KM_DEF_ENV
+#define CONFIG_KM_DEF_ENV \
+ CONFIG_KM_DEF_ENV_BOOTPARAMS \
+ CONFIG_KM_DEF_NETDEV \
+ CONFIG_KM_DEF_ENV_CPU \
+ CONFIG_KM_DEF_ENV_BOOTRUNNER \
+ CONFIG_KM_DEF_ENV_BOOTTARGETS \
+ CONFIG_KM_DEF_ENV_BOOTARGS \
+ CONFIG_KM_DEF_ENV_COMPUTE_ADDR \
+ CONFIG_KM_DEF_ENV_FLASH_BOOT \
+ CONFIG_KM_DEF_ENV_NET_BOOT \
+ CONFIG_KM_DEF_ENV_CONSTANTS \
+ "altbootcmd=run bootcmd\0" \
+ "bootcmd=run default\0" \
+ "bootlimit=2\0" \
+ "init=/sbin/init-overlay.sh\0" \
+ "kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
+ "kernel_file="xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel_name=uImage\0" \
+ "load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "stderr=serial\0" \
+ "stdin=serial\0" \
+ "stdout=serial\0" \
+ "u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
+ ""
+#endif /* CONFIG_KM_DEF_ENV */
+
+#define CONFIG_VERSION_VARIABLE /* include version env variable */
+
+#endif /* __CONFIG_KEYMILE_H */
--- /dev/null
+/*
+ * (C) Copyright 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_KEYMILE_POWERPC_H
+#define __CONFIG_KEYMILE_POWERPC_H
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_CMD_DTT
+#define CONFIG_JFFS2_CMDLINE
+
+#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
+#define CONFIG_FLASH_CFI_MTD
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+
+/******************************************************************************
+ * (PRAM usage)
+ * ... -------------------------------------------------------
+ * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM
+ * ... |<------------------- pram -------------------------->|
+ * ... -------------------------------------------------------
+ * @END_OF_RAM:
+ * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose
+ * @CONFIG_KM_PHRAM: address for /var
+ * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application)
+ * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM
+ */
+
+/* size of rootfs in RAM */
+#define CONFIG_KM_ROOTFSSIZE 0x0
+/* pseudo-non volatile RAM [hex] */
+#define CONFIG_KM_PNVRAM 0x80000
+/* physical RAM MTD size [hex] */
+#define CONFIG_KM_PHRAM 0x100000
+/* resereved pram area at the end of memroy [hex] */
+#define CONFIG_KM_RESERVED_PRAM 0x0
+/* enable protected RAM */
+#define CONFIG_PRAM 0
+
+#define CONFIG_KM_CRAMFS_ADDR 0x800000
+#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 3968Kbytes */
+#define CONFIG_KM_FDT_ADDR 0x7E0000 /* 128Kbytes */
+
+#define CONFIG_KM_DEF_ENV_CPU \
+ "addbootcount=echo \\\\c\0" \
+ "addmtdparts=echo \\\\c\0" \
+ "boot=bootm ${actual_kernel_addr} - ${actual_fdt_addr}\0" \
+ "cramfsloadfdt=" \
+ "cramfsload ${fdt_addr_r} " \
+ "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb && " \
+ "setenv actual_fdt_addr ${fdt_addr_r}\0" \
+ "fdt_addr_r=" xstr(CONFIG_KM_FDT_ADDR) "\0" \
+ "fdt_file=" \
+ xstr(CONFIG_HOSTNAME) "/" \
+ xstr(CONFIG_HOSTNAME) ".dtb\0" \
+ "tftpfdt=" \
+ "tftpboot ${fdt_addr_r} ${fdt_file} && " \
+ "setenv actual_fdt_addr ${fdt_addr_r} \0" \
+ "update=" \
+ "protect off " xstr(BOOTFLASH_START) " +${filesize} && "\
+ "erase " xstr(BOOTFLASH_START) " +${filesize} && " \
+ "cp.b ${u-boot_addr_r} " xstr(BOOTFLASH_START) \
+ " ${filesize} && " \
+ "protect on " xstr(BOOTFLASH_START) " +${filesize}\0" \
+ ""
+
+#endif /* __CONFIG_KEYMILE_POWERPC_H */
--- /dev/null
+/*
+ * (C) Copyright 2007-2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KM82XX_COMMON
+#define __KM82XX_COMMON
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define CONFIG_CONS_ON_SMC /* Console is on SMC */
+#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
+#undef CONFIG_CONS_NONE /* It's not on external UART */
+#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
+ */
+#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */
+#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */
+#undef CONFIG_ETHER_NONE /* No external Ethernet */
+#define CONFIG_NET_MULTI
+
+#define CONFIG_ETHER_INDEX 4
+#define CONFIG_HAS_ETH0
+#define CONFIG_SYS_SCC_TOUT_LOOP 10000000
+
+#define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
+
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN 66000000 /* in Hz */
+#endif
+
+#define BOOTFLASH_START 0xFE000000
+
+#define CONFIG_KM_CONSOLE_TTY "ttyCPM0"
+
+#define MTDPARTS_DEFAULT "mtdparts=" \
+ "app:" \
+ "768k(u-boot)," \
+ "128k(env)," \
+ "128k(envred)," \
+ "3072k(free)," \
+ "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_KM_BOARD_EXTRA_ENV \
+ CONFIG_KM_DEF_ENV \
+ "EEprom_ivm=pca9544a:70:4 \0" \
+ "unlock=yes\0" \
+ "newenv=" \
+ "prot off 0xFE0C0000 +0x40000 && " \
+ "era 0xFE0C0000 +0x40000\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ ""
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_SYS_MONITOR_LEN (768 << 10)
+
+#define CONFIG_ENV_IS_IN_FLASH
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
+
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+#endif /* CONFIG_ENV_IS_IN_FLASH */
+
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+
+#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00010000)
+#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
+#define I2C_READ ((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit) do { \
+ if (bit) \
+ iop->pdat |= 0x00010000; \
+ else \
+ iop->pdat &= ~0x00010000; \
+ } while (0)
+#define I2C_SCL(bit) do { \
+ if (bit) \
+ iop->pdat |= 0x00020000; \
+ else \
+ iop->pdat &= ~0x00020000; \
+ } while (0)
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CONFIG_SYS_DTT_MAX_TEMP 70
+#define CONFIG_SYS_DTT_LOW_TEMP -30
+#define CONFIG_SYS_DTT_HYSTERESIS 3
+#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+#define CONFIG_SYS_IMMR 0xF0000000
+
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
+#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* used size in DPRAM */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+/* Hard reset configuration word */
+#define CONFIG_SYS_HRCW_MASTER 0x0604b211
+
+/* No slaves */
+#define CONFIG_SYS_HRCW_SLAVE1 0
+#define CONFIG_SYS_HRCW_SLAVE2 0
+#define CONFIG_SYS_HRCW_SLAVE3 0
+#define CONFIG_SYS_HRCW_SLAVE4 0
+#define CONFIG_SYS_HRCW_SLAVE5 0
+#define CONFIG_SYS_HRCW_SLAVE6 0
+#define CONFIG_SYS_HRCW_SLAVE7 0
+
+/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CONFIG_SYS_HID0_INIT 0
+#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
+
+#define CONFIG_SYS_HID2 0
+
+#define CONFIG_SYS_SIUMCR 0x4020c200
+#define CONFIG_SYS_SYPCR 0xFFFFFF83
+#define CONFIG_SYS_BCR 0x10000000
+#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK)
+
+/*
+ *-----------------------------------------------------------------------
+ * RMR - Reset Mode Register 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CONFIG_SYS_RMR 0
+
+/*
+ *-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*
+ *-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*
+ *-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_SYS_RCCR 0
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 8 bit FLASH
+ * 1 60x SDRAM 32 bit SDRAM
+ * 3 60x GPCM 8 bit GPIO/PIGGY
+ * 5 60x GPCM 16 bit CFG-Flash
+ *
+ */
+/* Bank 0 - FLASH
+ */
+#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV2 |\
+ ORxG_SCY_5_CLK |\
+ ORxG_TRLX)
+
+#define CONFIG_SYS_MPTPR 0x1800
+
+/*
+ *-----------------------------------------------------------------------------
+ * Address for Mode Register Set (MRS) command
+ *-----------------------------------------------------------------------------
+ */
+#define CONFIG_SYS_MRS_OFFS 0x00000110
+#define CONFIG_SYS_PSRT 0x0e
+
+#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
+
+/*
+ * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values
+ */
+#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
+
+#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
+
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_3_CLK | ORxG_TRLX)
+
+/*
+ * BFTICU board FPGA on CS4 initialization values
+ */
+#define CONFIG_SYS_FPGA_BASE 0x40000000
+#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/
+
+#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
+
+#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_3_CLK | ORxG_TRLX)
+
+/*
+ * CFG-Flash on CS5 initialization values
+ */
+#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\
+ BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
+
+#define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \
+ CONFIG_SYS_FLASH_SIZE_2) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_5_CLK | ORxG_TRLX)
+
+#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
+
+/* pass open firmware flat tree */
+#define CONFIG_FIT 1
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"
+
+#endif /* __KM82XX_COMMON */
--- /dev/null
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ * Peter Barada <peterb@logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2010
+ * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
+ *
+ * (C) Copyright 2010-2011
+ * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM8321_COMMON_H
+#define __CONFIG_KM8321_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_QE /* Has QE */
+#define CONFIG_MPC832x /* MPC832x CPU specific */
+#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */
+
+#define CONFIG_KM_DEF_ROOTPATH \
+ "rootpath=/opt/eldk/ppc_8xx\0"
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRL SICRL_IRQ_CKS
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+ HRCWL_DDR_TO_SCB_CLK_2X1 | \
+ HRCWL_CSB_TO_CLKIN_2X1 | \
+ HRCWL_CORE_TO_CSB_2_5X1 | \
+ HRCWL_CE_PLL_VCO_DIV_2 | \
+ HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+ HRCWH_PCI_AGENT | \
+ HRCWH_PCI_ARBITER_DISABLE | \
+ HRCWH_CORE_ENABLE | \
+ HRCWH_FROM_0X00000100 | \
+ HRCWH_BOOTSEQ_DISABLE | \
+ HRCWH_SW_WATCHDOG_DISABLE | \
+ HRCWH_ROM_LOC_LOCAL_16BIT | \
+ HRCWH_BIG_ENDIAN | \
+ HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+ SDRAM_CFG_32_BE | \
+ SDRAM_CFG_SREN)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+ (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
+ CSCONFIG_ODT_WR_CFG | \
+ CSCONFIG_ROW_BIT_13 | \
+ CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE 0x47860252
+#define CONFIG_SYS_DDR_MODE2 0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+ (0 << TIMING_CFG0_WWT_SHIFT) | \
+ (0 << TIMING_CFG0_RRT_SHIFT) | \
+ (0 << TIMING_CFG0_WRT_SHIFT) | \
+ (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
+ (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+ (2 << TIMING_CFG1_WRREC_SHIFT) | \
+ (6 << TIMING_CFG1_REFREC_SHIFT) | \
+ (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
+ (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+ (2 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+ (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+ (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3 0x00000000
+
+#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR 0x00000000
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_SYS_IBAT7L (0)
+#define CONFIG_SYS_IBAT7U (0)
+#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
+
+#endif /* __CONFIG_KM8321_COMMON_H */
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM83XX_H
+#define __CONFIG_KM83XX_H
+
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+#include "km-powerpc.h"
+
+#define MTDIDS_DEFAULT "nor0=boot"
+#define MTDPARTS_DEFAULT "mtdparts=" \
+ "boot:" \
+ "768k(u-boot)," \
+ "128k(env)," \
+ "128k(envred)," \
+ "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+
+#define CONFIG_MISC_INIT_R
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66000000
+#define CONFIG_SYS_CLK_FREQ 66000000
+#define CONFIG_83XX_PCICLK 66000000
+
+/*
+ * IMMR new address
+ */
+#define CONFIG_SYS_IMMR 0xE0000000
+
+/*
+ * Bus Arbitration Configuration Register (ACR)
+ */
+#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */
+#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */
+#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */
+#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
+ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+
+#define CFG_83XX_DDR_USES_CS0
+
+/*
+ * Manually set up DDR parameters
+ */
+#define CONFIG_DDR_II
+#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
+
+/*
+ * The reserved memory
+ */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_FLASH_BASE 0xF0000000
+
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+/* Reserve 768 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus Machine PortSz Size Device
+ * ---- --- ------- ------ ----- ------
+ * 0 Local GPCM 16 bit 256MB FLASH
+ * 1 Local GPCM 8 bit 128MB GPIO/PIGGY
+ *
+ */
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
+#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */
+
+#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V)
+
+#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
+ OR_GPCM_SCY_5 | \
+ OR_GPCM_TRLX | OR_GPCM_EAD)
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+/*
+ * PRIO1/PIGGY on the local bus CS1
+ */
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
+
+#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \
+ (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
+ BR_V)
+#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
+ OR_GPCM_SCY_2 | \
+ OR_GPCM_TRLX | OR_GPCM_EAD)
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME "UEC0"
+
+#define CONFIG_UEC_ETH1 /* GETH1 */
+#define UEC_VERBOSE_DEBUG 1
+
+#ifdef CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR 0
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CONFIG_SYS_RAMBOOT
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
+
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+#else /* CFG_SYS_RAMBOOT */
+#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
+#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE 0x2000
+#endif /* CFG_SYS_RAMBOOT */
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x3000
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
+#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
+#define CONFIG_SYS_DTT_MAX_TEMP 70
+#define CONFIG_SYS_DTT_LOW_TEMP -30
+#define CONFIG_SYS_DTT_HYSTERESIS 3
+#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
+
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE
+#endif
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
+
+/*
+ * Core HID Setup
+ */
+#define CONFIG_SYS_HID0_INIT 0x000000000
+#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
+ HID0_ENABLE_INSTRUCTION_CACHE)
+#define CONFIG_SYS_HID2 HID2_HBE
+
+/*
+ * MMU Setup
+ */
+
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
+/* DDR: cache cacheable */
+#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \
+ | BATU_VP)
+#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
+
+/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
+#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
+ BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define BOOTFLASH_START 0xF0000000
+
+#define CONFIG_KM_CONSOLE_TTY "ttyS0"
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
+#define CONFIG_KM_DEF_ENV "km-common=empty\0"
+#endif
+
+#ifndef CONFIG_KM_DEF_ROOTPATH
+#define CONFIG_KM_DEF_ROOTPATH \
+ "rootpath=/opt/eldk/ppc_82xx\0"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ CONFIG_KM_DEF_ENV \
+ CONFIG_KM_DEF_ROOTPATH \
+ "dtt_bus=pca9547:70:a\0" \
+ "EEprom_ivm=pca9547:70:9\0" \
+ "newenv=" \
+ "prot off 0xF00C0000 +0x40000 && " \
+ "era 0xF00C0000 +0x40000\0" \
+ "unlock=yes\0" \
+ ""
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
+#endif
+
+#endif /* __CONFIG_KM83XX_H */
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2010-2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * for linking errors see
+ * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
+ */
+
+#ifndef _CONFIG_KM_ARM_H
+#define _CONFIG_KM_ARM_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL
+#define CONFIG_ARM926EJS /* Basic Architecture */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */
+
+/* include common defines/options for all Keymile boards */
+#include "keymile-common.h"
+
+#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */
+#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */
+#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
+#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
+#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
+
+/* pseudo-non volatile RAM [hex] */
+#define CONFIG_KM_PNVRAM 0x80000
+/* physical RAM MTD size [hex] */
+#define CONFIG_KM_PHRAM 0x17F000
+
+#define CONFIG_KM_CRAMFS_ADDR 0x2400000
+#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */
+
+#define CONFIG_KM_DEF_ENV_CPU \
+ "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "boot=bootm ${actual_kernel_addr} - -\0" \
+ "cramfsloadfdt=echo \\\\c\0" \
+ "tftpfdt=echo \\\\c\0" \
+ CONFIG_KM_DEF_ENV_UPDATE \
+ ""
+
+
+
+#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
+#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG /* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+
+/*
+ * Without NOR FLASH we need this
+ */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
+/*
+ * NAND Flash configuration
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_NAND_BASE 0xd8000000
+
+#define BOOTFLASH_START 0x0
+
+#define CONFIG_KM_CONSOLE_TTY "ttyS0"
+
+/* size in bytes reserved for initial data */
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
+#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
+
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* specify more that one ports available */
+#define CONFIG_MII /* expose smi ove miiphy interface */
+#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 0
+#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */
+
+/*
+ * UBI related stuff
+ */
+#define CONFIG_SYS_USE_UBI
+
+/*
+ * I2C related stuff
+ */
+#define CONFIG_SOFT_I2C /* I2C bit-banged */
+
+#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
+#if defined(CONFIG_SOFT_I2C)
+#ifndef __ASSEMBLY__
+#include <asm/arch-kirkwood/gpio.h>
+extern void __set_direction(unsigned pin, int high);
+void set_sda(int state);
+void set_scl(int state);
+int get_sda(void);
+int get_scl(void);
+#define KM_KIRKWOOD_SDA_PIN 8
+#define KM_KIRKWOOD_SCL_PIN 9
+#define KM_KIRKWOOD_ENV_WP 38
+
+#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
+#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
+#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
+#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
+#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
+#endif
+
+#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */
+#define I2C_SOFT_DECLARATIONS
+
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+#endif
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+
+/*
+ * Environment variables configurations
+ */
+#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */
+#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_EEPROM_WREN
+#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
+#undef CONFIG_ENV_SIZE
+#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
+#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
+
+/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
+#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+#define CONFIG_CMD_SF
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_KIRKWOOD_SPI
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */
+
+#define FLASH_GPIO_PIN 0x00010000
+
+#define MTDIDS_DEFAULT "nand0=orion_nand"
+/* test-only: partitioning needs some tuning, this is just for tests */
+#define MTDPARTS_DEFAULT "mtdparts=" \
+ "orion_nand:" \
+ "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
+
+#define CONFIG_KM_DEF_ENV_UPDATE \
+ "update=" \
+ "spi on;sf probe 0;sf erase 0 50000;" \
+ "sf write ${u-boot_addr_r} 0 ${filesize};" \
+ "spi off\0"
+
+#if defined(CONFIG_SYS_NO_FLASH)
+#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
+#undef CONFIG_FLASH_CFI_MTD
+#undef CONFIG_JFFS2_CMDLINE
+#endif
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+/* Kirkwood has 2k of Security SRAM, use it for SP */
+#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000
+/* Do early setups now in board_init_f() */
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * resereved pram area at the end of memroy [hex]
+ * 8Mbytes for switch + 4Kbytes for bootcount
+ */
+#define CONFIG_KM_RESERVED_PRAM 0x801000
+/* address for the bootcount (taken from end of RAM) */
+#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
+
+#endif /* _CONFIG_KM_ARM_H */
+++ /dev/null
-/*
- * (C) Copyright 2007-2010
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __KM82XX_COMMON
-#define __KM82XX_COMMON
-
-/*
- * Select serial console configuration
- *
- * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- */
-#define CONFIG_CONS_ON_SMC /* Console is on SMC */
-#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
-#undef CONFIG_CONS_NONE /* It's not on external UART */
-#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */
-#define CONFIG_SYS_SMC_RXBUFLEN 128
-#define CONFIG_SYS_MAXIDLE 10
-
-/*
- * Select ethernet configuration
- *
- * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
- * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
- * SCC, 1-3 for FCC)
- *
- * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
- * must be unset.
- */
-#define CONFIG_ETHER_ON_SCC /* Ethernet is on SCC */
-#undef CONFIG_ETHER_ON_FCC /* Ethernet is not on FCC */
-#undef CONFIG_ETHER_NONE /* No external Ethernet */
-#define CONFIG_NET_MULTI
-
-#define CONFIG_ETHER_INDEX 4
-#define CONFIG_HAS_ETH0
-#define CONFIG_SYS_SCC_TOUT_LOOP 10000000
-
-#define CONFIG_SYS_CMXSCR_VALUE (CMXSCR_RS4CS_CLK7 | CMXSCR_TS4CS_CLK8)
-
-#ifndef CONFIG_8260_CLKIN
-#define CONFIG_8260_CLKIN 66000000 /* in Hz */
-#endif
-
-#define BOOTFLASH_START 0xFE000000
-
-#define CONFIG_KM_CONSOLE_TTY "ttyCPM0"
-
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "app:" \
- "768k(u-boot)," \
- "128k(env)," \
- "128k(envred)," \
- "3072k(free)," \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-
-/*
- * Default environment settings
- */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_KM_BOARD_EXTRA_ENV \
- CONFIG_KM_DEF_ENV \
- "EEprom_ivm=pca9544a:70:4 \0" \
- "unlock=yes\0" \
- "newenv=" \
- "prot off 0xFE0C0000 +0x40000 && " \
- "era 0xFE0C0000 +0x40000\0" \
- "rootpath=/opt/eldk/ppc_82xx\0" \
- ""
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN (768 << 10)
-
-#define CONFIG_ENV_IS_IN_FLASH
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-#endif /* CONFIG_ENV_IS_IN_FLASH */
-
-/* enable I2C and select the hardware/software driver */
-#undef CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED 50000 /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE (iop->pdir |= 0x00010000)
-#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
-#define I2C_READ ((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit) do { \
- if (bit) \
- iop->pdat |= 0x00010000; \
- else \
- iop->pdat &= ~0x00010000; \
- } while (0)
-#define I2C_SCL(bit) do { \
- if (bit) \
- iop->pdat |= 0x00020000; \
- else \
- iop->pdat &= ~0x00020000; \
- } while (0)
-#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
-
-/* I2C SYSMON (LM75, AD7414 is almost compatible) */
-#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP 70
-#define CONFIG_SYS_DTT_LOW_TEMP -30
-#define CONFIG_SYS_DTT_HYSTERESIS 3
-#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-
-#define CONFIG_SYS_IMMR 0xF0000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* used size in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* Hard reset configuration word */
-#define CONFIG_SYS_HRCW_MASTER 0x0604b211
-
-/* No slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-/* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT 0
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
-
-#define CONFIG_SYS_HID2 0
-
-#define CONFIG_SYS_SIUMCR 0x4020c200
-#define CONFIG_SYS_SYPCR 0xFFFFFF83
-#define CONFIG_SYS_BCR 0x10000000
-#define CONFIG_SYS_SCCR (SCCR_PCI_MODE | SCCR_PCI_MODCK)
-
-/*
- *-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR 0
-
-/*
- *-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*
- *-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*
- *-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 8 bit FLASH
- * 1 60x SDRAM 32 bit SDRAM
- * 3 60x GPCM 8 bit GPIO/PIGGY
- * 5 60x GPCM 16 bit CFG-Flash
- *
- */
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\
- BRx_PS_8 |\
- BRx_MS_GPCM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
- ORxG_CSNT |\
- ORxG_ACS_DIV2 |\
- ORxG_SCY_5_CLK |\
- ORxG_TRLX)
-
-#define CONFIG_SYS_MPTPR 0x1800
-
-/*
- *-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS 0x00000110
-#define CONFIG_SYS_PSRT 0x0e
-
-#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\
- BRx_PS_64 |\
- BRx_MS_SDRAM_P |\
- BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1
-
-/*
- * UPIO FPGA (GPIO/PIGGY) on CS3 initialization values
- */
-#define CONFIG_SYS_KMBEC_FPGA_BASE 0x30000000
-#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
-
-#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_KMBEC_FPGA_BASE & BRx_BA_MSK) |\
- BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
-
-#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) |\
- ORxG_CSNT | ORxG_ACS_DIV2 |\
- ORxG_SCY_3_CLK | ORxG_TRLX)
-
-/*
- * BFTICU board FPGA on CS4 initialization values
- */
-#define CONFIG_SYS_FPGA_BASE 0x40000000
-#define CONFIG_SYS_FPGA_SIZE 1 /*1KB*/
-
-#define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_FPGA_BASE & BRx_BA_MSK) |\
- BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
-
-#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(CONFIG_SYS_FPGA_SIZE << 10) |\
- ORxG_CSNT | ORxG_ACS_DIV2 |\
- ORxG_SCY_3_CLK | ORxG_TRLX)
-
-/*
- * CFG-Flash on CS5 initialization values
- */
-#define CONFIG_SYS_BR5_PRELIM ((CONFIG_SYS_FLASH_BASE_1 & BRx_BA_MSK) |\
- BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
-
-#define CONFIG_SYS_OR5_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE_1 + \
- CONFIG_SYS_FLASH_SIZE_2) |\
- ORxG_CSNT | ORxG_ACS_DIV2 |\
- ORxG_SCY_5_CLK | ORxG_TRLX)
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
-
-/* pass open firmware flat tree */
-#define CONFIG_FIT 1
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc/cpm/serial@11a90"
-
-#endif /* __KM82XX_COMMON */
+++ /dev/null
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * Copyright (C) 2007 Logic Product Development, Inc.
- * Peter Barada <peterb@logicpd.com>
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * (C) Copyright 2010
- * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
- *
- * (C) Copyright 2010-2011
- * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#ifndef __CONFIG_KM8321_COMMON_H
-#define __CONFIG_KM8321_COMMON_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_QE /* Has QE */
-#define CONFIG_MPC832x /* MPC832x CPU specific */
-#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */
-
-#define CONFIG_KM_DEF_ROOTPATH \
- "rootpath=/opt/eldk/ppc_8xx\0"
-
-/* include common defines/options for all 83xx Keymile boards */
-#include "km83xx-common.h"
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * System IO Config
- */
-#define CONFIG_SYS_SICRL SICRL_IRQ_CKS
-
-/*
- * Hardware Reset Configuration Word
- */
-#define CONFIG_SYS_HRCW_LOW (\
- HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
- HRCWL_DDR_TO_SCB_CLK_2X1 | \
- HRCWL_CSB_TO_CLKIN_2X1 | \
- HRCWL_CORE_TO_CSB_2_5X1 | \
- HRCWL_CE_PLL_VCO_DIV_2 | \
- HRCWL_CE_TO_PLL_1X3)
-
-#define CONFIG_SYS_HRCW_HIGH (\
- HRCWH_PCI_AGENT | \
- HRCWH_PCI_ARBITER_DISABLE | \
- HRCWH_CORE_ENABLE | \
- HRCWH_FROM_0X00000100 | \
- HRCWH_BOOTSEQ_DISABLE | \
- HRCWH_SW_WATCHDOG_DISABLE | \
- HRCWH_ROM_LOC_LOCAL_16BIT | \
- HRCWH_BIG_ENDIAN | \
- HRCWH_LALE_NORMAL)
-
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
-#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
- SDRAM_CFG_32_BE | \
- SDRAM_CFG_SREN)
-
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
-#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
- (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
-
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
- CSCONFIG_ODT_WR_CFG | \
- CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10)
-
-#define CONFIG_SYS_DDR_MODE 0x47860252
-#define CONFIG_SYS_DDR_MODE2 0x8080c000
-
-#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
- (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
- (0 << TIMING_CFG0_WWT_SHIFT) | \
- (0 << TIMING_CFG0_RRT_SHIFT) | \
- (0 << TIMING_CFG0_WRT_SHIFT) | \
- (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
- (2 << TIMING_CFG1_WRTORD_SHIFT) | \
- (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
- (2 << TIMING_CFG1_WRREC_SHIFT) | \
- (6 << TIMING_CFG1_REFREC_SHIFT) | \
- (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
- (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
- (2 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
- (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
- (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
- (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
- (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
- (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
- (5 << TIMING_CFG2_CPO_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-
-#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
-#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
-
-/* EEprom support */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-
-/*
- * Local Bus Configuration & Clock Setup
- */
-#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
-#define CONFIG_SYS_LBC_LBCR 0x00000000
-
-/*
- * MMU Setup
- */
-#define CONFIG_SYS_IBAT7L (0)
-#define CONFIG_SYS_IBAT7U (0)
-#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
-
-#endif /* __CONFIG_KM8321_COMMON_H */
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#ifndef __CONFIG_KM83XX_H
-#define __CONFIG_KM83XX_H
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-#include "km-powerpc.h"
-
-#define MTDIDS_DEFAULT "nor0=boot"
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "boot:" \
- "768k(u-boot)," \
- "128k(env)," \
- "128k(envred)," \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-
-#define CONFIG_MISC_INIT_R
-/*
- * System Clock Setup
- */
-#define CONFIG_83XX_CLKIN 66000000
-#define CONFIG_SYS_CLK_FREQ 66000000
-#define CONFIG_83XX_PCICLK 66000000
-
-/*
- * IMMR new address
- */
-#define CONFIG_SYS_IMMR 0xE0000000
-
-/*
- * Bus Arbitration Configuration Register (ACR)
- */
-#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */
-#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */
-#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */
-#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
- DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-
-#define CFG_83XX_DDR_USES_CS0
-
-/*
- * Manually set up DDR parameters
- */
-#define CONFIG_DDR_II
-#define CONFIG_SYS_DDR_SIZE 2048 /* MB */
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#define CONFIG_SYS_FLASH_BASE 0xF0000000
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/* Reserve 768 kB for Mon */
-#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * Init Local Bus Memory Controller:
- *
- * Bank Bus Machine PortSz Size Device
- * ---- --- ------- ------ ----- ------
- * 0 Local GPCM 16 bit 256MB FLASH
- * 1 Local GPCM 8 bit 128MB GPIO/PIGGY
- *
- */
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
-#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001b /* 256MB window size */
-
-#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
- (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
- BR_V)
-
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
- OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
- OR_GPCM_SCY_5 | \
- OR_GPCM_TRLX | OR_GPCM_EAD)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-/*
- * PRIO1/PIGGY on the local bus CS1
- */
-/* Window base at flash base */
-#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE
-#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001A /* 128MB window size */
-
-#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \
- (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
- BR_V)
-#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \
- OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
- OR_GPCM_SCY_2 | \
- OR_GPCM_TRLX | OR_GPCM_EAD)
-
-/*
- * Serial Port
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-/*
- * QE UEC ethernet configuration
- */
-#define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME "UEC0"
-
-#define CONFIG_UEC_ETH1 /* GETH1 */
-#define UEC_VERBOSE_DEBUG 1
-
-#ifdef CONFIG_UEC_ETH1
-#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
-#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
-#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
-#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
-#endif
-
-/*
- * Environment
- */
-
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
-#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN)
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
- CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#else /* CFG_SYS_RAMBOOT */
-#define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
-#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE 0x2000
-#endif /* CFG_SYS_RAMBOOT */
-
-/* I2C */
-#define CONFIG_HARD_I2C /* I2C with hardware support */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED 200000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0x7F
-#define CONFIG_SYS_I2C_OFFSET 0x3000
-
-/* I2C SYSMON (LM75, AD7414 is almost compatible) */
-#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
-#define CONFIG_DTT_SENSORS {0, 1, 2, 3} /* Sensor addresses */
-#define CONFIG_SYS_DTT_MAX_TEMP 70
-#define CONFIG_SYS_DTT_LOW_TEMP -30
-#define CONFIG_SYS_DTT_HYSTERESIS 3
-#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_KMETER1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE
-#endif
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-
-/*
- * Core HID Setup
- */
-#define CONFIG_SYS_HID0_INIT 0x000000000
-#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
- HID0_ENABLE_INSTRUCTION_CACHE)
-#define CONFIG_SYS_HID2 HID2_HBE
-
-/*
- * MMU Setup
- */
-
-#define CONFIG_HIGH_BATS 1 /* High BATs supported */
-
-/* DDR: cache cacheable */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
- BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
- BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \
- BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \
- | BATU_VP)
-#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
- BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \
- BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_10 | \
- BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-/* FLASH: icache cacheable, but dcache-inhibit and guarded */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
- BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \
- BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
- BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/* Stack in dcache: cacheable, no memory coherence */
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
-#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \
- BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
-#define BOOTFLASH_START 0xF0000000
-
-#define CONFIG_KM_CONSOLE_TTY "ttyS0"
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ENV_OVERWRITE
-#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
-#define CONFIG_KM_DEF_ENV "km-common=empty\0"
-#endif
-
-#ifndef CONFIG_KM_DEF_ROOTPATH
-#define CONFIG_KM_DEF_ROOTPATH \
- "rootpath=/opt/eldk/ppc_82xx\0"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_KM_DEF_ENV \
- CONFIG_KM_DEF_ROOTPATH \
- "dtt_bus=pca9547:70:a\0" \
- "EEprom_ivm=pca9547:70:9\0" \
- "newenv=" \
- "prot off 0xF00C0000 +0x40000 && " \
- "era 0xF00C0000 +0x40000\0" \
- "unlock=yes\0" \
- ""
-
-#if defined(CONFIG_UEC_ETH)
-#define CONFIG_HAS_ETH0
-#endif
-
-#endif /* __CONFIG_KM83XX_H */
+++ /dev/null
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_ARM_H
-#define _CONFIG_KM_ARM_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_MARVELL
-#define CONFIG_ARM926EJS /* Basic Architecture */
-#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD /* SOC Family Name */
-#define CONFIG_KW88F6281 /* SOC Name */
-#define CONFIG_MACH_KM_KIRKWOOD /* Machine type */
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-
-#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */
-#define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
-#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM 0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM 0x17F000
-
-#define CONFIG_KM_CRAMFS_ADDR 0x2400000
-#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 4096KBytes */
-
-#define CONFIG_KM_DEF_ENV_CPU \
- "addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "boot=bootm ${actual_kernel_addr} - -\0" \
- "cramfsloadfdt=echo \\\\c\0" \
- "tftpfdt=echo \\\\c\0" \
- CONFIG_KM_DEF_ENV_UPDATE \
- ""
-
-
-
-#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
-#undef CONFIG_KIRKWOOD_PCIE_INIT /* Disable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_INITRD_TAG /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
-
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NFS
-
-/*
- * Without NOR FLASH we need this
- */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_NAND_BASE 0xd8000000
-
-#define BOOTFLASH_START 0x0
-
-#define CONFIG_KM_CONSOLE_TTY "ttyS0"
-
-/* size in bytes reserved for initial data */
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
-#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS 4
-#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
-
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_NET_MULTI /* specify more that one ports available */
-#define CONFIG_MII /* expose smi ove miiphy interface */
-#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
-#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR 0
-#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R /* use reset_phy() to init 88E1118 PHY */
-
-/*
- * UBI related stuff
- */
-#define CONFIG_SYS_USE_UBI
-
-/*
- * I2C related stuff
- */
-#define CONFIG_SOFT_I2C /* I2C bit-banged */
-
-#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
-#if defined(CONFIG_SOFT_I2C)
-#ifndef __ASSEMBLY__
-#include <asm/arch-kirkwood/gpio.h>
-extern void __set_direction(unsigned pin, int high);
-void set_sda(int state);
-void set_scl(int state);
-int get_sda(void);
-int get_scl(void);
-#define KM_KIRKWOOD_SDA_PIN 8
-#define KM_KIRKWOOD_SCL_PIN 9
-#define KM_KIRKWOOD_ENV_WP 38
-
-#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
-#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
-#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
-#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
-#endif
-
-#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */
-#define I2C_SOFT_DECLARATIONS
-
-#define CONFIG_SYS_I2C_SLAVE 0x0
-#define CONFIG_SYS_I2C_SPEED 100000
-#endif
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_IS_IN_EEPROM /* use EEPROM for environment vars */
-#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_EEPROM_WREN
-#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS "pca9547:70:d\0"
-
-/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#define CONFIG_CMD_SF
-
-#define CONFIG_SPI_FLASH
-#define CONFIG_HARD_SPI
-#define CONFIG_KIRKWOOD_SPI
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50Mhz */
-
-#define FLASH_GPIO_PIN 0x00010000
-
-#define MTDIDS_DEFAULT "nand0=orion_nand"
-/* test-only: partitioning needs some tuning, this is just for tests */
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "orion_nand:" \
- "-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-
-#define CONFIG_KM_DEF_ENV_UPDATE \
- "update=" \
- "spi on;sf probe 0;sf erase 0 50000;" \
- "sf write ${u-boot_addr_r} 0 ${filesize};" \
- "spi off\0"
-
-#if defined(CONFIG_SYS_NO_FLASH)
-#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
-#undef CONFIG_FLASH_CFI_MTD
-#undef CONFIG_JFFS2_CMDLINE
-#endif
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-/* Kirkwood has 2k of Security SRAM, use it for SP */
-#define CONFIG_SYS_INIT_SP_ADDR 0xC8012000
-/* Do early setups now in board_init_f() */
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*
- * resereved pram area at the end of memroy [hex]
- * 8Mbytes for switch + 4Kbytes for bootcount
- */
-#define CONFIG_KM_RESERVED_PRAM 0x801000
-/* address for the bootcount (taken from end of RAM) */
-#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
-
-#endif /* _CONFIG_KM_ARM_H */
"netdev=eth2\0" \
/* include common defines/options for all 83xx Keymile boards */
-#include "km83xx-common.h"
+#include "km/km83xx-common.h"
#define CONFIG_MISC_INIT_R
/*
#define CONFIG_SYS_TEXT_BASE 0xF0000000
/* include common defines/options for all 8321 Keymile boards */
-#include "km8321-common.h"
+#include "km/km8321-common.h"
/*
* Init Local Bus Memory Controller:
#define CONFIG_SYS_TEXT_BASE 0xFE000000
/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-#include "km-powerpc.h"
+#include "km/keymile-common.h"
+#include "km/km-powerpc.h"
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFE000000
#define CONFIG_KM_BOARD_EXTRA_ENV ""
/* include further common stuff for all keymile 82xx boards */
-#include "km82xx-common.h"
+#include "km/km82xx-common.h"
#endif /* __CONFIG_H */
#define _CONFIG_MGCOGE2UN_H
/* include common defines/options for all arm based Keymile boards */
-#include "km_arm.h"
+#include "km/km_arm.h"
/*
* Version number information
#define CONFIG_SYS_TEXT_BASE 0xFE000000
/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-#include "km-powerpc.h"
+#include "km/keymile-common.h"
+#include "km/km-powerpc.h"
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFE000000
#define CONFIG_KM_BOARD_EXTRA_ENV "bobcatreset=true\0"
/* include further common stuff for all keymile 82xx boards */
-#include "km82xx-common.h"
+#include "km/km82xx-common.h"
/* bfticu address */
#define CONFIG_SYS_BFTICU_BASE 0x40000000
#define _CONFIG_SUEN3_H
/* include common defines/options for all arm based Keymile boards */
-#include "km_arm.h"
+#include "km/km_arm.h"
/*
* Version number information
#define _CONFIG_SUEN8_H
/* include common defines/options for all arm based Keymile boards */
-#include "km_arm.h"
+#include "km/km_arm.h"
/*
* Version number information
#define CONFIG_SYS_TEXT_BASE 0xF0000000
/* include common defines/options for all 8321 Keymile boards */
-#include "km8321-common.h"
+#include "km/km8321-common.h"
#define CONFIG_SYS_APP1_BASE 0xA0000000
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_TEXT_BASE 0xF0000000
/* include common defines/options for all 8321 Keymile boards */
-#include "km8321-common.h"
+#include "km/km8321-common.h"
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
#define CONFIG_SYS_TEXT_BASE 0xF0000000
/* include common defines/options for all 8321 Keymile boards */
-#include "km8321-common.h"
+#include "km/km8321-common.h"
#define CONFIG_SYS_LPXF_BASE 0xA0000000 /* LPXF */
#define CONFIG_SYS_LPXF_SIZE 256 /* Megabytes */
projects / project / bcm63xx / u-boot.git / commitdiff