In order to prevent accessing the hpd registers outside of the display
power wells, we should refrain from writing to the registers before the
display interrupts are enabled.
[ 4.740136] WARNING: CPU: 1 PID: 221 at drivers/gpu/drm/i915/intel_uncore.c:795 __unclaimed_reg_debug+0x44/0x50 [i915]
[ 4.740155] Unclaimed read from register 0x1e1110
[ 4.740168] Modules linked in: i915(+) intel_gtt drm_kms_helper prime_numbers
[ 4.740190] CPU: 1 PID: 221 Comm: systemd-udevd Not tainted 4.10.0-rc6+ #384
[ 4.740203] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015
[ 4.740220] Call Trace:
[ 4.740236] dump_stack+0x4d/0x6f
[ 4.740251] __warn+0xc1/0xe0
[ 4.740265] warn_slowpath_fmt+0x4a/0x50
[ 4.740281] ? insert_work+0x77/0xc0
[ 4.740355] ? fwtable_write32+0x90/0x130 [i915]
[ 4.740431] __unclaimed_reg_debug+0x44/0x50 [i915]
[ 4.740507] fwtable_read32+0xd8/0x130 [i915]
[ 4.740575] i915_hpd_irq_setup+0xa5/0x100 [i915]
[ 4.740649] intel_hpd_init+0x68/0x80 [i915]
[ 4.740716] i915_driver_load+0xe19/0x1380 [i915]
[ 4.740784] i915_pci_probe+0x32/0x90 [i915]
[ 4.740799] pci_device_probe+0x8b/0xf0
[ 4.740815] driver_probe_device+0x2b6/0x450
[ 4.740828] __driver_attach+0xda/0xe0
[ 4.740841] ? driver_probe_device+0x450/0x450
[ 4.740853] bus_for_each_dev+0x5b/0x90
[ 4.740865] driver_attach+0x19/0x20
[ 4.740878] bus_add_driver+0x166/0x260
[ 4.740892] driver_register+0x5b/0xd0
[ 4.740906] ? 0xffffffffa0166000
[ 4.740920] __pci_register_driver+0x47/0x50
[ 4.740985] i915_init+0x5c/0x5e [i915]
[ 4.740999] do_one_initcall+0x3e/0x160
[ 4.741015] ? __vunmap+0x7c/0xc0
[ 4.741029] ? kmem_cache_alloc+0xcf/0x120
[ 4.741045] do_init_module+0x55/0x1c4
[ 4.741060] load_module+0x1f3f/0x25b0
[ 4.741073] ? __symbol_put+0x40/0x40
[ 4.741086] ? kernel_read_file+0x100/0x190
[ 4.741100] SYSC_finit_module+0xbc/0xf0
[ 4.741112] SyS_finit_module+0x9/0x10
[ 4.741125] entry_SYSCALL_64_fastpath+0x17/0x98
[ 4.741135] RIP: 0033:0x7f8559a140f9
[ 4.741145] RSP: 002b:
00007fff7509a3e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 4.741161] RAX:
ffffffffffffffda RBX:
00007f855aba02d1 RCX:
00007f8559a140f9
[ 4.741172] RDX:
0000000000000000 RSI:
000055b6db0914f0 RDI:
0000000000000011
[ 4.741183] RBP:
0000000000020000 R08:
0000000000000000 R09:
000000000000000e
[ 4.741193] R10:
0000000000000011 R11:
0000000000000246 R12:
000055b6db0854d0
[ 4.741204] R13:
000055b6db091150 R14:
0000000000000000 R15:
000055b6db035924
v2: Set dev_priv->display_irqs_enabled to true for all platforms other
than vlv/chv that manually control the display power domain.
Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97798
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20170215131547.5064-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
if (!IS_GEN2(dev_priv))
dev->vblank_disable_immediate = true;
+ /* Most platforms treat the display irq block as an always-on
+ * power domain. vlv/chv can disable it at runtime and need
+ * special care to avoid writing any of the display block registers
+ * outside of the power domain. We defer setting up the display irqs
+ * in this case to the runtime pm.
+ */
+ dev_priv->display_irqs_enabled = true;
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ dev_priv->display_irqs_enabled = false;
+
dev_priv->hotplug.hpd_storm_threshold = HPD_STORM_DEFAULT_THRESHOLD;
dev->driver->get_vblank_timestamp = i915_get_vblank_timestamp;
}
}
}
- if (dev_priv->display.hpd_irq_setup)
+ if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev_priv);
spin_unlock_irq(&dev_priv->irq_lock);
}
}
- if (storm_detected)
+ if (storm_detected && dev_priv->display_irqs_enabled)
dev_priv->display.hpd_irq_setup(dev_priv);
spin_unlock(&dev_priv->irq_lock);
* Interrupt setup is already guaranteed to be single-threaded, this is
* just to make the assert_spin_locked checks happy.
*/
- spin_lock_irq(&dev_priv->irq_lock);
- if (dev_priv->display.hpd_irq_setup)
- dev_priv->display.hpd_irq_setup(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
+ if (dev_priv->display_irqs_enabled && dev_priv->display.hpd_irq_setup) {
+ spin_lock_irq(&dev_priv->irq_lock);
+ if (dev_priv->display_irqs_enabled)
+ dev_priv->display.hpd_irq_setup(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+ }
}
static void i915_hpd_poll_init_work(struct work_struct *work)
projects / openwrt / staging / blogic.git / commitdiff