+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_OMAP2 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_ARCH_WM8750 is not set
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_CNS3XXX_ETH=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_V6K=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMA_CACHE_FIQ_BROADCAST=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FIQ=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CNS3XXX=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-# CONFIG_MACH_CNS3420VB is not set
-CONFIG_MACH_GW2388=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_CNS3XXX=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_OF_PARTS is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=2
-CONFIG_NTP_PPS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PPS=y
-CONFIG_PPS_CLIENT_GPIO=y
-CONFIG_RAID_ATTRS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_GSC=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CNS3XXX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_CNS3XXX_EHCI=y
-CONFIG_USB_CNS3XXX_OHCI=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-# CONFIG_USB_DWC2_PCI is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_PCI=y
-# CONFIG_USB_ETH is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,3 +1,5 @@
-+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-+
- obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
- cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
+++ /dev/null
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,4 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572
- eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573
- domotab MACH_DOMOTAB DOMOTAB 4574
- pfla03 MACH_PFLA03 PFLA03 4575
-+gw2388 MACH_GW2388 GW2388 2635
+++ /dev/null
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -156,9 +156,15 @@ static inline void nop_dma_unmap_area(co
- #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
- #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
- #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
--#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-
--#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-+# define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-+#else
-+# define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area)
-+# define dmac_flush_range __glue(fiq,_dma_flush_range)
-+#endif
-+
- #endif
-
- #endif
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -866,6 +866,17 @@ config DMA_CACHE_RWFO
- in hardware, other workarounds are needed (e.g. cache
- maintenance broadcasting in software via FIQ).
-
-+config DMA_CACHE_FIQ_BROADCAST
-+ bool "Enable fiq broadcast DMA cache maintenance"
-+ depends on CPU_V6K && SMP
-+ select FIQ
-+ help
-+ The Snoop Control Unit on ARM11MPCore does not detect the
-+ cache maintenance operations and the dma_{map,unmap}_area()
-+ functions may leave stale cache entries on other CPUs. By
-+ enabling this option, fiq broadcast in the ARMv6
-+ DMA cache maintenance functions is performed.
-+
- config OUTER_CACHE
- bool
-
---- a/arch/arm/mm/flush.c
-+++ b/arch/arm/mm/flush.c
-@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval)
- void flush_dcache_page(struct page *page)
- {
- struct address_space *mapping;
-+ bool skip_broadcast = true;
-
- /*
- * The zero page is never written to, so never has any dirty
-@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page
-
- mapping = page_mapping(page);
-
-- if (!cache_ops_need_broadcast() &&
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+ skip_broadcast = !cache_ops_need_broadcast();
-+#endif
-+ if (skip_broadcast &&
- mapping && !page_mapped(page))
- clear_bit(PG_dcache_clean, &page->flags);
- else {
---- a/arch/arm/mm/dma.h
-+++ b/arch/arm/mm/dma.h
-@@ -4,8 +4,13 @@
- #include <asm/glue-cache.h>
-
- #ifndef MULTI_CACHE
--#define dmac_map_area __glue(_CACHE,_dma_map_area)
--#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define dmac_map_area __glue(_CACHE,_dma_map_area)
-+# define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-+#else
-+# define dmac_map_area __glue(fiq,_dma_map_area)
-+# define dmac_unmap_area __glue(fiq,_dma_unmap_area)
-+#endif
-
- /*
- * These are private to the dma-mapping API. Do not use directly.
+++ /dev/null
-1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog
- since the CNS3xxx SOCs have ARM11 MPcore CPU.
-2. Enable mpcore_watchdog option as module to default configuration at
- arch/arm/configs/cns3420vb_defconfig.
-
-Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com>
-
----
-arch/arm/Kconfig | 1 +
- arch/arm/configs/cns3420vb_defconfig | 2 ++
- arch/arm/mach-cns3xxx/cns3420vb.c | 22 ++++++++++++++++++++++
- 3 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/arm/configs/cns3420vb_defconfig
-+++ b/arch/arm/configs/cns3420vb_defconfig
-@@ -56,6 +56,8 @@ CONFIG_LEGACY_PTY_COUNT=16
- # CONFIG_HW_RANDOM is not set
- # CONFIG_HWMON is not set
- # CONFIG_VGA_CONSOLE is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_MPCORE_WATCHDOG=m
- # CONFIG_HID_SUPPORT is not set
- # CONFIG_USB_SUPPORT is not set
- CONFIG_MMC=y
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -206,10 +206,32 @@ static struct platform_device cns3xxx_us
- },
- };
-
-+/* Watchdog */
-+static struct resource cns3xxx_watchdog_resources[] = {
-+ [0] = {
-+ .start = CNS3XXX_TC11MP_TWD_BASE,
-+ .end = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ [1] = {
-+ .start = IRQ_LOCALWDOG,
-+ .end = IRQ_LOCALWDOG,
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device cns3xxx_watchdog_device = {
-+ .name = "mpcore_wdt",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(cns3xxx_watchdog_resources),
-+ .resource = cns3xxx_watchdog_resources,
-+};
-+
- /*
- * Initialization
- */
- static struct platform_device *cns3420_pdevs[] __initdata = {
-+ &cns3xxx_watchdog_device,
- &cns3420_nor_pdev,
- &cns3xxx_usb_ehci_device,
- &cns3xxx_usb_ohci_device,
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
-+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
- select ARM_GIC
- select PCI_DOMAINS if PCI
-+ select HAVE_ARM_SCU if SMP
-+ select HAVE_ARM_TWD
-+ select HAVE_SMP
- help
- Support for Cavium Networks CNS3XXX platform.
-
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -13,6 +13,7 @@
-
- #include <linux/reboot.h>
-
-+extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
-
- #ifdef CONFIG_CACHE_L2X0
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -281,8 +281,6 @@ void __init cns3xxx_pcie_init_late(void)
- "imprecise external abort");
-
- for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
- cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- private_data = &cns3xxx_pcie[i];
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD
- select HAVE_SMP
-+ select FIQ
- help
- Support for Cavium Networks CNS3XXX platform.
-
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
--cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -267,6 +267,7 @@
- #define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100)
- #define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-+#define MISC_FIQ_CPU(x) MISC_MEM_MAP(0xA58 - (x) * 0x4)
- /*
- * Power management and clock control
- */
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -849,7 +849,7 @@ config VDSO
-
- config DMA_CACHE_RWFO
- bool "Enable read/write for ownership DMA cache maintenance"
-- depends on CPU_V6K && SMP
-+ depends on CPU_V6K && SMP && !ARCH_CNS3XXX
- default y
- help
- The Snoop Control Unit on ARM11MPCore does not detect the
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -17,6 +17,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <asm/smp_twd.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/mach/time.h>
-@@ -26,6 +27,8 @@
- #include "core.h"
- #include "pm.h"
-
-+#define IRQ_LOCALTIMER 29
-+
- static struct map_desc cns3xxx_io_desc[] __initdata = {
- {
- .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
-@@ -198,6 +201,15 @@ static struct irqaction cns3xxx_timer_ir
- .handler = cns3xxx_timer_interrupt,
- };
-
-+static void __init cns3xxx_init_twd(void)
-+{
-+ static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer,
-+ CNS3XXX_TC11MP_TWD_BASE,
-+ IRQ_LOCALTIMER);
-+
-+ twd_local_timer_register(&cns3xx_twd_local_timer);
-+}
-+
- /*
- * Set up the clock source and clock events devices
- */
-@@ -251,6 +263,7 @@ static void __init __cns3xxx_timer_init(
- setup_irq(timer_irq, &cns3xxx_timer_irq);
-
- cns3xxx_clockevents_init(timer_irq);
-+ cns3xxx_init_twd();
- }
-
- void __init cns3xxx_timer_init(void)
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[]
- .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
- #endif
- },
- };
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -86,6 +86,79 @@ static void __iomem *cns3xxx_pci_map_bus
- return base + (where & 0xffc) + (devfn << 12);
- }
-
-+static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where)
-+{
-+ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-+
-+ /* check PCI-compatible status register after access */
-+ if (cnspci->linked) {
-+ void __iomem *host_base;
-+ u32 sreg, ereg;
-+
-+ host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+ sreg = __raw_readw(host_base + 0x6) & 0xF900;
-+ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
-+
-+ if (sreg | ereg) {
-+ /* SREG:
-+ * BIT15 - Detected Parity Error
-+ * BIT14 - Signaled System Error
-+ * BIT13 - Received Master Abort
-+ * BIT12 - Received Target Abort
-+ * BIT11 - Signaled Target Abort
-+ * BIT08 - Master Data Parity Error
-+ *
-+ * EREG:
-+ * BIT20 - Unsupported Request
-+ * BIT19 - ECRC
-+ * BIT18 - Malformed TLP
-+ * BIT17 - Receiver Overflow
-+ * BIT16 - Unexpected Completion
-+ * BIT15 - Completer Abort
-+ * BIT14 - Completion Timeout
-+ * BIT13 - Flow Control Protocol Error
-+ * BIT12 - Poisoned TLP
-+ * BIT04 - Data Link Protocol Error
-+ *
-+ * TODO: see Documentation/pci-error-recovery.txt
-+ * implement error_detected handler
-+ */
-+/*
-+ printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg);
-+ if (sreg & BIT(15)) printk(" <PERR");
-+ if (sreg & BIT(14)) printk(" >SERR");
-+ if (sreg & BIT(13)) printk(" <MABRT");
-+ if (sreg & BIT(12)) printk(" <TABRT");
-+ if (sreg & BIT(11)) printk(" >TABRT");
-+ if (sreg & BIT( 8)) printk(" MPERR");
-+
-+ if (ereg & BIT(20)) printk(" Unsup");
-+ if (ereg & BIT(19)) printk(" ECRC");
-+ if (ereg & BIT(18)) printk(" MTLP");
-+ if (ereg & BIT(17)) printk(" OFLOW");
-+ if (ereg & BIT(16)) printk(" Unex");
-+ if (ereg & BIT(15)) printk(" ABRT");
-+ if (ereg & BIT(14)) printk(" COMPTO");
-+ if (ereg & BIT(13)) printk(" FLOW");
-+ if (ereg & BIT(12)) printk(" PTLP");
-+ if (ereg & BIT( 4)) printk(" DLINK");
-+ printk("\n");
-+*/
-+ pr_debug("%s failed port%d sreg=0x%04x\n", __func__,
-+ pci_domain_nr(bus), sreg);
-+
-+ /* make sure the status bits are reset */
-+ __raw_writew(sreg, host_base + 6);
-+ __raw_writel(ereg, host_base + 0x104);
-+ return 1;
-+ }
-+ }
-+ else
-+ return 1;
-+
-+ return 0;
-+}
-+
- static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
- {
-@@ -95,6 +168,11 @@ static int cns3xxx_pci_read_config(struc
-
- ret = pci_generic_config_read32(bus, devfn, where, size, val);
-
-+ if (check_master_abort(bus, devfn, where)) {
-+ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ }
-+
- if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- (where & 0xffc) == PCI_CLASS_REVISION)
- /*
-@@ -257,8 +335,14 @@ static void __init cns3xxx_pcie_hw_init(
- static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
- {
-+#if 0
-+/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE
-+ * ignore imprecise aborts and use PCI-compatible Status register to
-+ * determine errors instead
-+ */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-+#endif
- return 0;
- }
-
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -366,6 +366,8 @@ void __init cns3xxx_pcie_init_late(void)
-
- for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
- cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-+ if (!cns3xxx_pcie[i].linked)
-+ continue;
- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- private_data = &cns3xxx_pcie[i];
- pci_common_init(&hw_pci);
+++ /dev/null
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -440,6 +440,18 @@ config I2C_CBUS_GPIO
- This driver can also be built as a module. If so, the module
- will be called i2c-cbus-gpio.
-
-+config I2C_CNS3XXX
-+ tristate "Cavium CNS3xxx I2C driver"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Support for Cavium CNS3xxx I2C controller driver.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-cns3xxx.
-+
-+ Please note that this driver might be needed to bring up other
-+ devices such as Cavium CNS3xxx Ethernet.
-+
- config I2C_CPM
- tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- depends on CPM1 || CPM2
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -111,6 +111,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-vipe
- obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
- obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
- obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o
-+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
- obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
- obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
- obj-$(CONFIG_I2C_OPAL) += i2c-opal.o
+++ /dev/null
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -183,6 +183,13 @@ config SPI_CLPS711X
- This enables dedicated general purpose SPI/Microwire1-compatible
- master mode interface (SSI1) for CLPS711X-based CPUs.
-
-+config SPI_CNS3XXX
-+ tristate "CNS3XXX SPI controller"
-+ depends on ARCH_CNS3XXX && SPI_MASTER
-+ select SPI_BITBANG
-+ help
-+ This enables using the CNS3XXX SPI controller in master mode.
-+
- config SPI_COLDFIRE_QSPI
- tristate "Freescale Coldfire QSPI controller"
- depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban
- obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
- obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
- obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
-+obj-$(CONFIG_SPI_CNS3XXX) += spi-cns3xxx.o
- obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
- obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
- obj-$(CONFIG_SPI_DLN2) += spi-dln2.o
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -703,6 +703,10 @@ struct spi_transfer {
- u32 speed_hz;
-
- struct list_head transfer_list;
-+
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ unsigned last_in_message_list;
-+#endif
- };
-
- /**
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -933,6 +933,9 @@ static int spi_transfer_one_message(stru
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- trace_spi_transfer_start(msg, xfer);
-
-+ xfer->last_in_message_list =
-+ list_is_last(&xfer->transfer_list, &msg->transfers);
-+
- spi_statistics_add_transfer_stats(statm, xfer, master);
- spi_statistics_add_transfer_stats(stats, xfer, master);
-
+++ /dev/null
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -37,12 +37,23 @@ static struct scsi_host_template ahci_pl
- AHCI_SHT(DRV_NAME),
- };
-
-+static const struct ata_port_info cns3xxx_port_info = {
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_pmp_retry_srst_ops,
-+};
-+
- static int ahci_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
-+ const struct ata_port_info *info = &ahci_port_info;
- int rc;
-
-+ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
-+ info = &cns3xxx_port_info;
-+
- hpriv = ahci_platform_get_resources(pdev);
- if (IS_ERR(hpriv))
- return PTR_ERR(hpriv);
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -138,6 +138,7 @@ static int cns3xxx_set_oneshot(struct cl
-
- /* period set, and timer enabled in 'next_event' hook */
- ctrl |= (1 << 2) | (1 << 9);
-+ writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- return 0;
- }
-@@ -148,7 +149,7 @@ static int cns3xxx_set_periodic(struct c
- int pclk = cns3xxx_cpu_clock() / 8;
- int reload;
-
-- reload = pclk * 20 / (3 * HZ) * 0x25000;
-+ reload = pclk * 1000000 / HZ;
- writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-@@ -175,7 +176,7 @@ static struct clock_event_device cns3xxx
- .set_state_oneshot = cns3xxx_set_oneshot,
- .tick_resume = cns3xxx_shutdown,
- .set_next_event = cns3xxx_timer_set_next_event,
-- .rating = 350,
-+ .rating = 300,
- .cpumask = cpu_all_mask,
- };
-
-@@ -220,6 +221,32 @@ static void __init cns3xxx_init_twd(void
- twd_local_timer_register(&cns3xx_twd_local_timer);
- }
-
-+static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
-+{
-+ u64 val;
-+
-+ val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+ val &= 0xffff;
-+
-+ return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
-+}
-+
-+static struct clocksource clocksource_cns3xxx = {
-+ .name = "freerun",
-+ .rating = 200,
-+ .read = cns3xxx_get_cycles,
-+ .mask = CLOCKSOURCE_MASK(48),
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static void __init cns3xxx_clocksource_init(void)
-+{
-+ /* Reset the FreeRunning counter */
-+ writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+
-+ clocksource_register_khz(&clocksource_cns3xxx, 100);
-+}
-+
- /*
- * Set up the clock source and clock events devices
- */
-@@ -237,13 +264,12 @@ static void __init __cns3xxx_timer_init(
- /* stop free running timer3 */
- writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-- /* timer1 */
-- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
--
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-+ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
-+ writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-+
- /* mask irq, non-mask timer1 overflow */
- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
- irq_mask &= ~(1 << 2);
-@@ -255,23 +281,9 @@ static void __init __cns3xxx_timer_init(
- val |= (1 << 9);
- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-- /* timer2 */
-- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
--
-- /* mask irq */
-- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
--
-- /* down counter */
-- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-- val |= (1 << 10);
-- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
--
-- /* Make irqs happen for the system timer */
- setup_irq(timer_irq, &cns3xxx_timer_irq);
-
-+ cns3xxx_clocksource_init();
- cns3xxx_clockevents_init(timer_irq);
- cns3xxx_init_twd();
- }
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -245,6 +245,10 @@ static void __init cns3420_init(void)
-
- cns3xxx_ahci_init();
- cns3xxx_sdhci_init();
-+ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
-+ NR_IRQS_CNS3XXX);
-+ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
-+ NR_IRQS_CNS3XXX + 32);
-
- pm_power_off = cns3xxx_power_off;
- }
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -1,6 +1,8 @@
- menuconfig ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
- select ARM_GIC
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GENERIC_IRQ_CHIP
- select PCI_DOMAINS if PCI
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,7 +1,7 @@
- ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
- obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
--cns3xxx-y += core.o pm.o
-+cns3xxx-y += core.o pm.o gpio.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -68,8 +68,10 @@
- #define SMC_PCELL_ID_3_OFFSET 0xFFC
-
- #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
-+#define CNS3XXX_GPIOA_BASE_VIRT 0xFB006000
-
- #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
-+#define CNS3XXX_GPIOB_BASE_VIRT 0xFB007000
-
- #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
-
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[]
- .pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOA_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOB_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
- #ifdef CONFIG_PCI
- }, {
- .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -307,13 +307,26 @@ void __init cns3xxx_timer_init(void)
-
- #ifdef CONFIG_CACHE_L2X0
-
--void __init cns3xxx_l2x0_init(void)
-+static int cns3xxx_l2x0_enable = 1;
-+
-+static int __init cns3xxx_l2x0_disable(char *s)
-+{
-+ cns3xxx_l2x0_enable = 0;
-+ return 1;
-+}
-+__setup("nol2x0", cns3xxx_l2x0_disable);
-+
-+static int __init cns3xxx_l2x0_init(void)
- {
-- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-+ void __iomem *base;
- u32 val;
-
-+ if (!cns3xxx_l2x0_enable)
-+ return 0;
-+
-+ base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
- if (WARN_ON(!base))
-- return;
-+ return 0;
-
- /*
- * Tag RAM Control register
-@@ -343,7 +356,10 @@ void __init cns3xxx_l2x0_init(void)
-
- /* 32 KiB, 8-way, parity disable */
- l2x0_init(base, 0x00500000, 0xfe0f0fff);
-+
-+ return 0;
- }
-+arch_initcall(cns3xxx_l2x0_init);
-
- #endif /* CONFIG_CACHE_L2X0 */
-
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -239,8 +239,6 @@ static struct platform_device *cns3420_p
-
- static void __init cns3420_init(void)
- {
-- cns3xxx_l2x0_init();
--
- platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
- cns3xxx_ahci_init();
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -16,12 +16,6 @@
- extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
-
--#ifdef CONFIG_CACHE_L2X0
--void __init cns3xxx_l2x0_init(void);
--#else
--static inline void cns3xxx_l2x0_init(void) {}
--#endif /* CONFIG_CACHE_L2X0 */
--
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
- #else
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -22,4 +22,12 @@ config MACH_CNS3420VB
- This is a platform with an on-board ARM11 MPCore and has support
- for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-+config MACH_GW2388
-+ bool "Support for Gateworks Laguna Platform"
-+ help
-+ Include support for the Gateworks Laguna Platform
-+
-+ This is a platform with an on-board ARM11 MPCore and has support
-+ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
-+
- endif
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
- cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-+cns3xxx-$(CONFIG_MACH_GW2388) += laguna.o
-+
---- a/arch/arm/mach-cns3xxx/devices.c
-+++ b/arch/arm/mach-cns3xxx/devices.c
-@@ -16,6 +16,7 @@
- #include <linux/compiler.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
-+#include <asm/mach-types.h>
- #include "cns3xxx.h"
- #include "pm.h"
- #include "core.h"
-@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void)
- u32 gpioa_pins = __raw_readl(gpioa);
-
- /* MMC/SD pins share with GPIOA */
-- gpioa_pins |= 0x1fff0004;
-+ if (machine_is_gw2388()) {
-+ gpioa_pins |= 0x1fff0000;
-+ } else {
-+ gpioa_pins |= 0x1fff0004;
-+ }
- __raw_writel(gpioa_pins, gpioa);
-
- cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
+++ /dev/null
---- a/drivers/mmc/host/sdhci-cns3xxx.c
-+++ b/drivers/mmc/host/sdhci-cns3xxx.c
-@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh
- .ops = &sdhci_cns3xxx_ops,
- .quirks = SDHCI_QUIRK_BROKEN_DMA |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-- SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
- SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
-- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
-+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-+ SDHCI_QUIRK_BROKEN_CARD_DETECTION,
- };
-
- static int sdhci_cns3xxx_probe(struct platform_device *pdev)
+++ /dev/null
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -18,6 +18,7 @@
- #include <linux/io.h>
- #include <linux/ioport.h>
- #include <linux/interrupt.h>
-+#include <linux/irq.h>
- #include <linux/ptrace.h>
- #include <asm/mach/map.h>
- #include "cns3xxx.h"
-@@ -27,7 +28,7 @@ struct cns3xxx_pcie {
- void __iomem *host_regs; /* PCI config registers for host bridge */
- void __iomem *cfg0_regs; /* PCI Type 0 config registers */
- void __iomem *cfg1_regs; /* PCI Type 1 config registers */
-- unsigned int irqs[2];
-+ unsigned int irqs[5];
- struct resource res_io;
- struct resource res_mem;
- int port;
-@@ -95,7 +96,7 @@ static inline int check_master_abort(str
- void __iomem *host_base;
- u32 sreg, ereg;
-
-- host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+ host_base = (void __iomem *) cnspci->host_regs;
- sreg = __raw_readw(host_base + 0x6) & 0xF900;
- ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
-
-@@ -209,7 +210,7 @@ static struct pci_ops cns3xxx_pcie_ops =
- static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-- int irq = cnspci->irqs[!!dev->bus->number];
-+ int irq = cnspci->irqs[!!dev->bus->number + pin - 1];
-
- pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
- pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-@@ -235,7 +236,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
-- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-+ .irqs = {
-+ IRQ_CNS3XXX_PCIE0_RC,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ },
- .port = 0,
- },
- [1] = {
-@@ -254,7 +261,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
-- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-+ .irqs = {
-+ IRQ_CNS3XXX_PCIE1_RC,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ },
- .port = 1,
- },
- };
-@@ -346,6 +359,14 @@ static int cns3xxx_pcie_abort_handler(un
- return 0;
- }
-
-+void __init cns3xxx_pcie_set_irqs(int bus, int *irqs)
-+{
-+ int i;
-+
-+ for (i = 0; i < 4; i++)
-+ cns3xxx_pcie[bus].irqs[i + 1] = irqs[i];
-+}
-+
- void __init cns3xxx_pcie_init_late(void)
- {
- int i;
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void);
-
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
-+extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs);
- #else
- static inline void __init cns3xxx_pcie_init_late(void) {}
-+static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {}
- #endif
-
- void __init cns3xxx_map_io(void);
+++ /dev/null
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -1967,7 +1967,8 @@ static void pcie_write_mrrs(struct pci_d
- /* In the "safe" case, do not configure the MRRS. There appear to be
- * issues with setting MRRS to 0 on a number of devices.
- */
-- if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
-+ if (pcie_bus_config != PCIE_BUS_PERFORMANCE &&
-+ pcie_bus_config != PCIE_BUS_PEER2PEER)
- return;
-
- /* For Max performance, the MRRS must be set to the largest supported
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -757,7 +757,7 @@ enum pcie_bus_config_types {
- PCIE_BUS_DEFAULT, /* ensure MPS matches upstream bridge */
- PCIE_BUS_SAFE, /* use largest MPS boot-time devices support */
- PCIE_BUS_PERFORMANCE, /* use MPS and MRRS for best performance */
-- PCIE_BUS_PEER2PEER, /* set MPS = 128 for all devices */
-+ PCIE_BUS_PEER2PEER, /* set MPS and MRSS to 128 for all devices */
- };
-
- extern enum pcie_bus_config_types pcie_bus_config;
+++ /dev/null
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -414,6 +414,11 @@ static int bcm5481_config_aneg(struct ph
- /* Write bits 14:0. */
- reg |= (1 << 15);
- phy_write(phydev, 0x18, reg);
-+ } else {
-+ phy_write(phydev, 0x18, 0xf1e7);
-+ phy_write(phydev, 0x1c, 0x8e00);
-+
-+ phy_write(phydev, 0x1c, 0xa41f);
- }
-
- if (of_property_read_bool(np, "enet-phy-lane-swap")) {
+++ /dev/null
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -144,6 +144,34 @@ static int __dwc2_lowlevel_hw_enable(str
- return ret;
- }
-
-+static const struct dwc2_core_params params_cns3xxx = {
-+ .otg_cap = 2, /* non-HNP/non-SRP capable */
-+ .otg_ver = 0, /* 1.3 */
-+ .dma_enable = 1,
-+ .dma_desc_enable = 0,
-+ .speed = 0, /* High Speed */
-+ .enable_dynamic_fifo = 1,
-+ .en_multiple_tx_fifo = 1,
-+ .host_rx_fifo_size = 658, /* 774 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */
-+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */
-+ .max_transfer_size = 65535,
-+ .max_packet_count = 511,
-+ .host_channels = 16,
-+ .phy_type = 1, /* UTMI */
-+ .phy_utmi_width = 16, /* 8 bits */
-+ .phy_ulpi_ddr = 0, /* Single */
-+ .phy_ulpi_ext_vbus = 0,
-+ .i2c_enable = 0,
-+ .ulpi_fs_ls = 0,
-+ .host_support_fs_ls_low_power = 0,
-+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
-+ .ts_dline = 0,
-+ .reload_ctl = 0,
-+ .ahbcfg = 0x10,
-+ .uframe_sched = 0,
-+};
-+
- /**
- * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
- * @hsotg: The driver state
-@@ -344,6 +372,9 @@ static int dwc2_driver_probe(struct plat
- /* Default all params to autodetect */
- dwc2_set_all_params(&defparams, -1);
- params = &defparams;
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ params = ¶ms_cns3xxx;
-+#endif
-
- /*
- * Disable descriptor dma mode by default as the HW can support
projects / openwrt / staging / lynxis / omap.git / commitdiff