#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
+--- a/sound/soc/s3c24xx/s3c24xx-pcm.c 2009-06-10 05:05:27.000000000 +0200
++++ b/sound/soc/s3c24xx/s3c24xx-pcm.c 2009-05-16 13:25:48.000000000 +0200
+@@ -218,23 +231,16 @@
+ * sync to pclk, half-word transfers to the IIS-FIFO. */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ s3c2410_dma_devconfig(prtd->params->channel,
+- S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
+- S3C2410_DISRCC_APB, prtd->params->dma_addr);
+-
+- s3c2410_dma_config(prtd->params->channel,
+- prtd->params->dma_size,
+- S3C2410_DCON_SYNC_PCLK |
+- S3C2410_DCON_HANDSHAKE);
++ S3C2410_DMASRC_MEM,
++ prtd->params->dma_addr);
+ } else {
+- s3c2410_dma_config(prtd->params->channel,
+- prtd->params->dma_size,
+- S3C2410_DCON_HANDSHAKE |
+- S3C2410_DCON_SYNC_PCLK);
+-
+ s3c2410_dma_devconfig(prtd->params->channel,
+- S3C2410_DMASRC_HW, 0x3,
+- prtd->params->dma_addr);
++ S3C2410_DMASRC_HW,
++ prtd->params->dma_addr);
+ }
++
++ s3c2410_dma_config(prtd->params->channel,
++ prtd->params->dma_size);
+
+ /* flush the DMA channel */
+ s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
--- /dev/null
+--- a/sound/soc/s3c24xx/Kconfig
++++ b/sound/soc/s3c24xx/Kconfig
+@@ -42,10 +42,20 @@ config SND_S3C24XX_SOC_JIVE_WM8750
+ tristate "SoC I2S Audio support for Jive"
+ depends on SND_S3C24XX_SOC && MACH_JIVE
+ select SND_SOC_WM8750
++ select SND_SOC_WM8750_SPI
+ select SND_S3C2412_SOC_I2S
+ help
+ Sat Y if you want to add support for SoC audio on the Jive.
+
++config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
++ tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
++ depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
++ select SND_S3C24XX_SOC_I2S
++ select SND_SOC_WM8753
++ help
++ Say Y if you want to add support for SoC audio on Openmoko Freerunner
++ with the WM8753 codec
++
+ config SND_S3C24XX_SOC_SMDK2443_WM9710
+ tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
+ depends on SND_S3C24XX_SOC && MACH_SMDK2443
+--- a/sound/soc/s3c24xx/Makefile
++++ b/sound/soc/s3c24xx/Makefile
+@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_w
+ snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
+ snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+ snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
++snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
+
+ obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+ obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
++obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
+++ /dev/null
---- a/sound/soc/s3c24xx/Kconfig
-+++ b/sound/soc/s3c24xx/Kconfig
-@@ -42,10 +42,20 @@ config SND_S3C24XX_SOC_JIVE_WM8750
- tristate "SoC I2S Audio support for Jive"
- depends on SND_S3C24XX_SOC && MACH_JIVE
- select SND_SOC_WM8750
-+ select SND_SOC_WM8750_SPI
- select SND_S3C2412_SOC_I2S
- help
- Sat Y if you want to add support for SoC audio on the Jive.
-
-+config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
-+ tristate "SoC I2S Audio support for Openmoko Freerunner - WM8753"
-+ depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
-+ select SND_S3C24XX_SOC_I2S
-+ select SND_SOC_WM8753
-+ help
-+ Say Y if you want to add support for SoC audio on Openmoko Freerunner
-+ with the WM8753 codec
-+
- config SND_S3C24XX_SOC_SMDK2443_WM9710
- tristate "SoC AC97 Audio support for SMDK2443 - WM9710"
- depends on SND_S3C24XX_SOC && MACH_SMDK2443
---- a/sound/soc/s3c24xx/Makefile
-+++ b/sound/soc/s3c24xx/Makefile
-@@ -19,9 +19,11 @@ snd-soc-neo1973-wm8753-objs := neo1973_w
- snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
- snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
- snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
-+snd-soc-neo1973-gta02-wm8753-objs := gta02_wm8753.o
-
- obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
- obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
- obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
- obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
- obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
-+obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
---- a/sound/soc/s3c24xx/s3c24xx-i2s.c
-+++ b/sound/soc/s3c24xx/s3c24xx-i2s.c
-@@ -284,11 +284,14 @@ static int s3c24xx_i2s_trigger(struct sn
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-- if (!s3c24xx_snd_is_clkmaster()) {
-- ret = s3c24xx_snd_lrsync();
-- if (ret)
-- goto exit_err;
-- }
-+ if (!s3c24xx_snd_is_clkmaster())
-+ /* we ignore the return code, if it sync'd then fine,
-+ * if it didn't sync, which happens after resume the
-+ * first time when there was a live stream at suspend,
-+ * just let it timeout, the stream picks up OK after
-+ * that and LRCK is evidently working again.
-+ */
-+ s3c24xx_snd_lrsync();
-
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- s3c24xx_snd_rxctrl(1);
-@@ -308,7 +311,6 @@ static int s3c24xx_i2s_trigger(struct sn
- break;
- }
-
--exit_err:
- return ret;
- }
-
---- a/sound/soc/s3c24xx/s3c24xx-pcm.c
-+++ b/sound/soc/s3c24xx/s3c24xx-pcm.c
-@@ -75,11 +75,18 @@ static void s3c24xx_pcm_enqueue(struct s
- {
- struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
- dma_addr_t pos = prtd->dma_pos;
-+ unsigned int limit;
- int ret;
-
- pr_debug("Entered %s\n", __func__);
-
-- while (prtd->dma_loaded < prtd->dma_limit) {
-+ if (s3c_dma_has_circular()) {
-+ limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
-+ } else
-+ limit = prtd->dma_limit;
-+
-+
-+ while (prtd->dma_loaded < limit) {
- unsigned long len = prtd->dma_period;
-
- pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
-@@ -123,7 +130,7 @@ static void s3c24xx_audio_buffdone(struc
- snd_pcm_period_elapsed(substream);
-
- spin_lock(&prtd->lock);
-- if (prtd->state & ST_RUNNING) {
-+ if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
- prtd->dma_loaded--;
- s3c24xx_pcm_enqueue(substream);
- }
-@@ -164,6 +171,11 @@ static int s3c24xx_pcm_hw_params(struct
- printk(KERN_ERR "failed to get dma channel\n");
- return ret;
- }
-+
-+ /* use the circular buffering if we have it available. */
-+ if (s3c_dma_has_circular())
-+ s3c2410_dma_setflags(prtd->params->channel,
-+ S3C2410_DMAF_CIRCULAR);
- }
-
- s3c2410_dma_set_buffdone_fn(prtd->params->channel,
-@@ -218,24 +230,17 @@ static int s3c24xx_pcm_prepare(struct sn
- * sync to pclk, half-word transfers to the IIS-FIFO. */
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- s3c2410_dma_devconfig(prtd->params->channel,
-- S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
-- S3C2410_DISRCC_APB, prtd->params->dma_addr);
--
-- s3c2410_dma_config(prtd->params->channel,
-- prtd->params->dma_size,
-- S3C2410_DCON_SYNC_PCLK |
-- S3C2410_DCON_HANDSHAKE);
-+ S3C2410_DMASRC_MEM,
-+ prtd->params->dma_addr);
- } else {
-- s3c2410_dma_config(prtd->params->channel,
-- prtd->params->dma_size,
-- S3C2410_DCON_HANDSHAKE |
-- S3C2410_DCON_SYNC_PCLK);
--
- s3c2410_dma_devconfig(prtd->params->channel,
-- S3C2410_DMASRC_HW, 0x3,
-- prtd->params->dma_addr);
-+ S3C2410_DMASRC_HW,
-+ prtd->params->dma_addr);
- }
-
-+ s3c2410_dma_config(prtd->params->channel,
-+ prtd->params->dma_size);
-+
- /* flush the DMA channel */
- s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
- prtd->dma_loaded = 0;
projects / openwrt / svn-archive / archive.git / commitdiff