--- /dev/null
+/*
+ * Ubiquiti UniFi AC (LITE) board support
+ *
+ * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ *
+ * Derived from: mach-ubnt-xm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define UNIFIAC_KEYS_POLL_INTERVAL 20
+#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
+
+#define UNIFIAC_GPIO_LED_WHITE 7
+#define UNIFIAC_GPIO_LED_BLUE 8
+
+#define UNIFIAC_GPIO_BTN_RESET 2
+
+#define UNIFIAC_MAC0_OFFSET 0x0000
+#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
+#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
+
+
+static struct flash_platform_data ubnt_unifiac_flash_data = {
+ /* mx25l12805d and mx25l12835f have the same JEDEC ID */
+ .type = "mx25l12805d",
+};
+
+static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:white:dome",
+ .gpio = UNIFIAC_GPIO_LED_WHITE,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:blue:dome",
+ .gpio = UNIFIAC_GPIO_LED_BLUE,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UNIFIAC_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init ubnt_unifiac_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_pll_data.pll_10 = 0x00001313;
+
+ ath79_register_mdio(0, ~BIT(4));
+ ath79_register_eth(0);
+
+
+ ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+ ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+ ubnt_unifiac_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+ ubnt_unifiac_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC, "UBNT-UF-AC", "Ubiquiti UniFi-AC",
+ ubnt_unifiac_setup);
DEVICE_PROFILE := UBNT UBNTUNIFI
endef
+define Device/ubnt-unifiac
+ DEVICE_PROFILE := UBNT UBNTUNIFIAC
+ IMAGE_SIZE := 7744k
+ MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+ BOARDNAME := UBNT-UF-AC
+endef
+
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)