usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
gpio_free(musb->config->gpio_vrsel);
- return -ENODEV;
+ return -EPROBE_DEFER;
}
bfin_musb_reg_init(musb);
{
void __iomem *reg_base = musb->ctrl_base;
u32 rev;
+ int ret = -ENODEV;
musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv))
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
goto fail;
+ }
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
musb->isr = da8xx_musb_interrupt;
return 0;
fail:
- return -ENODEV;
+ return ret;
}
static int da8xx_musb_exit(struct musb *musb)
{
void __iomem *tibase = musb->ctrl_base;
u32 revision;
+ int ret = -ENODEV;
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (IS_ERR_OR_NULL(musb->xceiv))
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ ret = -EPROBE_DEFER;
goto unregister;
+ }
musb->mregs += DAVINCI_BASE_OFFSET;
usb_put_phy(musb->xceiv);
unregister:
usb_nop_xceiv_unregister();
- return -ENODEV;
+ return ret;
}
static int davinci_musb_exit(struct musb *musb)
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
/* Returns zero if e.g. not clocked */
rev = dsps_readl(reg_base, wrp->revision);
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
pr_err("HS USB OTG: no transceiver configured\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
musb->isr = omap2430_musb_interrupt;
usb_nop_xceiv_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv))
- return -ENODEV;
+ return -EPROBE_DEFER;
pdev = to_platform_device(musb->controller);
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR_OR_NULL(musb->xceiv)) {
pr_err("HS USB OTG: no transceiver configured\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
musb->isr = ux500_musb_interrupt;