--- /dev/null
+Index: b43/main.c
+===================================================================
+--- b43.orig/main.c 2008-02-15 22:39:48.000000000 +0100
++++ b43/main.c 2008-02-15 22:45:38.000000000 +0100
+@@ -2017,7 +2017,7 @@ static int b43_gpio_init(struct b43_wlde
+ mask |= 0x0180;
+ set |= 0x0180;
+ }
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL) {
+ b43_write16(dev, B43_MMIO_GPIO_MASK,
+ b43_read16(dev, B43_MMIO_GPIO_MASK)
+ | 0x0200);
+@@ -2384,7 +2384,7 @@ static void b43_periodic_every60sec(stru
+ return;
+ if (!b43_has_hardware_pctl(phy))
+ b43_lo_g_ctl_mark_all_unused(dev);
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+ b43_mac_suspend(dev);
+ b43_calc_nrssi_slope(dev);
+ if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 8)) {
+@@ -2794,11 +2794,14 @@ u8 b43_ieee80211_antenna_sanitize(struct
+ return 0;
+ }
+
++#if 0
+ /* Get the mask of available antennas. */
+ if (dev->phy.gmode)
+ antenna_mask = dev->dev->bus->sprom.ant_available_bg;
+ else
+ antenna_mask = dev->dev->bus->sprom.ant_available_a;
++#endif
++ antenna_mask = 0xFF; //FIXME need ssb update
+
+ if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
+ /* This antenna is not available. Fall back to default. */
+@@ -2939,7 +2942,7 @@ static int b43_op_set_key(struct ieee802
+ u8 algorithm;
+ u8 index;
+ int err;
+- DECLARE_MAC_BUF(mac);
++// DECLARE_MAC_BUF(mac);
+
+ if (modparam_nohwcrypt)
+ return -ENOSPC; /* User disabled HW-crypto */
+@@ -3019,10 +3022,12 @@ out_unlock:
+ spin_unlock_irqrestore(&wl->irq_lock, flags);
+ mutex_unlock(&wl->mutex);
+ if (!err) {
++#if 0
+ b43dbg(wl, "%s hardware based encryption for keyidx: %d, "
+ "mac: %s\n",
+ cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
+ print_mac(mac, addr));
++#endif
+ }
+ return err;
+ }
+@@ -3349,13 +3354,13 @@ static void b43_bluetooth_coext_enable(s
+ struct ssb_sprom *sprom = &dev->dev->bus->sprom;
+ u32 hf;
+
+- if (!(sprom->boardflags_lo & B43_BFL_BTCOEXIST))
++ if (!(sprom->r1.boardflags_lo & B43_BFL_BTCOEXIST))
+ return;
+ if (dev->phy.type != B43_PHYTYPE_B && !dev->phy.gmode)
+ return;
+
+ hf = b43_hf_read(dev);
+- if (sprom->boardflags_lo & B43_BFL_BTCMOD)
++ if (sprom->r1.boardflags_lo & B43_BFL_BTCMOD)
+ hf |= B43_HF_BTCOEXALT;
+ else
+ hf |= B43_HF_BTCOEX;
+@@ -3497,7 +3502,7 @@ static int b43_wireless_core_init(struct
+ hf |= B43_HF_SYMW;
+ if (phy->rev == 1)
+ hf |= B43_HF_GDCW;
+- if (sprom->boardflags_lo & B43_BFL_PACTRL)
++ if (sprom->r1.boardflags_lo & B43_BFL_PACTRL)
+ hf |= B43_HF_OFDMPABOOST;
+ } else if (phy->type == B43_PHYTYPE_B) {
+ hf |= B43_HF_SYMW;
+@@ -4001,10 +4006,10 @@ static void b43_sprom_fixup(struct ssb_b
+ /* boardflags workarounds */
+ if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
+ bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
+- bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
++ bus->sprom.r1.boardflags_lo |= B43_BFL_BTCOEXIST;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
+ bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
+- bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
++ bus->sprom.r1.boardflags_lo |= B43_BFL_PACTRL;
+ }
+
+ static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
+@@ -4038,10 +4043,10 @@ static int b43_wireless_init(struct ssb_
+ hw->max_noise = -110;
+ hw->queues = 1; /* FIXME: hardware has more queues */
+ SET_IEEE80211_DEV(hw, dev->dev);
+- if (is_valid_ether_addr(sprom->et1mac))
+- SET_IEEE80211_PERM_ADDR(hw, sprom->et1mac);
++ if (is_valid_ether_addr(sprom->r1.et1mac))
++ SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
+ else
+- SET_IEEE80211_PERM_ADDR(hw, sprom->il0mac);
++ SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
+
+ /* Get and initialize struct b43_wl */
+ wl = hw_to_b43_wl(hw);
+Index: b43/leds.c
+===================================================================
+--- b43.orig/leds.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/leds.c 2008-02-15 22:51:32.000000000 +0100
+@@ -190,10 +190,10 @@ void b43_leds_init(struct b43_wldev *dev
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+- sprom[0] = bus->sprom.gpio0;
+- sprom[1] = bus->sprom.gpio1;
+- sprom[2] = bus->sprom.gpio2;
+- sprom[3] = bus->sprom.gpio3;
++ sprom[0] = bus->sprom.r1.gpio0;
++ sprom[1] = bus->sprom.r1.gpio1;
++ sprom[2] = bus->sprom.r1.gpio2;
++ sprom[3] = bus->sprom.r1.gpio3;
+
+ for (i = 0; i < 4; i++) {
+ if (sprom[i] == 0xFF) {
+Index: b43/lo.c
+===================================================================
+--- b43.orig/lo.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/lo.c 2008-02-15 22:50:17.000000000 +0100
+@@ -264,7 +264,7 @@ static u16 lo_measure_feedthrough(struct
+ rfover |= pga;
+ rfover |= lna;
+ rfover |= trsw_rx;
+- if ((dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA)
++ if ((dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA)
+ && phy->rev > 6)
+ rfover |= B43_PHY_RFOVERVAL_EXTLNA;
+
+@@ -634,7 +634,7 @@ static void lo_measure_setup(struct b43_
+ & 0xFFFC);
+ if (phy->type == B43_PHYTYPE_G) {
+ if ((phy->rev >= 7) &&
+- (sprom->boardflags_lo & B43_BFL_EXTLNA)) {
++ (sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+ b43_phy_write(dev, B43_PHY_RFOVER, 0x933);
+ } else {
+ b43_phy_write(dev, B43_PHY_RFOVER, 0x133);
+Index: b43/nphy.c
+===================================================================
+--- b43.orig/nphy.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/nphy.c 2008-02-15 22:48:51.000000000 +0100
+@@ -134,6 +134,8 @@ static void b43_radio_init2055_post(stru
+
+ b43_radio_mask(dev, B2055_MASTER1, 0xFFF3);
+ msleep(1);
++//FIXME ssb update needed
++#if 0
+ if ((sprom->revision != 4) || !(sprom->boardflags_hi & 0x0002)) {
+ if ((binfo->vendor != PCI_VENDOR_ID_BROADCOM) ||
+ (binfo->type != 0x46D) ||
+@@ -143,6 +145,7 @@ static void b43_radio_init2055_post(stru
+ msleep(1);
+ }
+ }
++#endif
+ b43_radio_maskset(dev, B2055_RRCCAL_NOPTSEL, 0x3F, 0x2C);
+ msleep(1);
+ b43_radio_write16(dev, B2055_CAL_MISC, 0x3C);
+Index: b43/phy.c
+===================================================================
+--- b43.orig/phy.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/phy.c 2008-02-15 22:47:55.000000000 +0100
+@@ -924,7 +924,7 @@ static void b43_phy_inita(struct b43_wld
+ }
+
+ if ((phy->type == B43_PHYTYPE_G) &&
+- (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)) {
++ (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)) {
+ b43_phy_write(dev, B43_PHY_OFDM(0x6E),
+ (b43_phy_read(dev, B43_PHY_OFDM(0x6E))
+ & 0xE000) | 0x3CF);
+@@ -1027,7 +1027,7 @@ static void b43_phy_initb4(struct b43_wl
+ if (phy->radio_ver == 0x2050)
+ b43_phy_write(dev, 0x002A, 0x88C2);
+ b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt, phy->tx_control);
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+ b43_calc_nrssi_slope(dev);
+ b43_calc_nrssi_threshold(dev);
+ }
+@@ -1174,7 +1174,7 @@ static void b43_phy_initb6(struct b43_wl
+ b43_radio_write16(dev, 0x5A, 0x88);
+ b43_radio_write16(dev, 0x5B, 0x6B);
+ b43_radio_write16(dev, 0x5C, 0x0F);
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_ALTIQ) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_ALTIQ) {
+ b43_radio_write16(dev, 0x5D, 0xFA);
+ b43_radio_write16(dev, 0x5E, 0xD8);
+ } else {
+@@ -1266,7 +1266,7 @@ static void b43_phy_initb6(struct b43_wl
+ b43_phy_write(dev, 0x0062, 0x0007);
+ b43_radio_init2050(dev);
+ b43_lo_g_measure(dev);
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI) {
+ b43_calc_nrssi_slope(dev);
+ b43_calc_nrssi_threshold(dev);
+ }
+@@ -1386,7 +1386,7 @@ static void b43_calc_loopback_gain(struc
+ b43_phy_write(dev, B43_PHY_RFOVERVAL,
+ b43_phy_read(dev, B43_PHY_RFOVERVAL) & 0xCFFF);
+
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_EXTLNA) {
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) {
+ if (phy->rev >= 7) {
+ b43_phy_write(dev, B43_PHY_RFOVER,
+ b43_phy_read(dev, B43_PHY_RFOVER)
+@@ -1553,7 +1553,7 @@ static void b43_phy_initg(struct b43_wld
+ & 0x0FFF) | (phy->lo_control->
+ tx_bias << 12));
+ }
+- if (dev->dev->bus->sprom.boardflags_lo & B43_BFL_PACTRL)
++ if (dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_PACTRL)
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x8075);
+ else
+ b43_phy_write(dev, B43_PHY_CCK(0x2E), 0x807F);
+@@ -1567,7 +1567,7 @@ static void b43_phy_initg(struct b43_wld
+ b43_phy_write(dev, B43_PHY_LO_MASK, 0x8078);
+ }
+
+- if (!(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
++ if (!(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+ /* The specs state to update the NRSSI LT with
+ * the value 0x7FFFFFFF here. I think that is some weird
+ * compiler optimization in the original driver.
+@@ -1776,15 +1776,15 @@ void b43_phy_xmitpower(struct b43_wldev
+ estimated_pwr =
+ b43_phy_estimate_power_out(dev, average);
+
+- max_pwr = dev->dev->bus->sprom.maxpwr_bg;
+- if ((dev->dev->bus->sprom.boardflags_lo
++ max_pwr = dev->dev->bus->sprom.r1.maxpwr_bg;
++ if ((dev->dev->bus->sprom.r1.boardflags_lo
+ & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
+ max_pwr -= 0x3;
+ if (unlikely(max_pwr <= 0)) {
+ b43warn(dev->wl,
+ "Invalid max-TX-power value in SPROM.\n");
+ max_pwr = 60; /* fake it */
+- dev->dev->bus->sprom.maxpwr_bg = max_pwr;
++ dev->dev->bus->sprom.r1.maxpwr_bg = max_pwr;
+ }
+
+ /*TODO:
+@@ -1842,7 +1842,7 @@ void b43_phy_xmitpower(struct b43_wldev
+ B43_TXCTL_TXMIX;
+ rfatt += 2;
+ bbatt += 2;
+- } else if (dev->dev->bus->sprom.
++ } else if (dev->dev->bus->sprom.r1.
+ boardflags_lo &
+ B43_BFL_PACTRL) {
+ bbatt += 4 * (rfatt - 2);
+@@ -1921,13 +1921,13 @@ int b43_phy_init_tssi2dbm_table(struct b
+ s8 *dyn_tssi2dbm;
+
+ if (phy->type == B43_PHYTYPE_A) {
+- pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
+- pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
+- pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
++ pab0 = (s16) (dev->dev->bus->sprom.r1.pa1b0);
++ pab1 = (s16) (dev->dev->bus->sprom.r1.pa1b1);
++ pab2 = (s16) (dev->dev->bus->sprom.r1.pa1b2);
+ } else {
+- pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
+- pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
+- pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
++ pab0 = (s16) (dev->dev->bus->sprom.r1.pa0b0);
++ pab1 = (s16) (dev->dev->bus->sprom.r1.pa0b1);
++ pab2 = (s16) (dev->dev->bus->sprom.r1.pa0b2);
+ }
+
+ if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
+@@ -1940,17 +1940,17 @@ int b43_phy_init_tssi2dbm_table(struct b
+ pab0 != -1 && pab1 != -1 && pab2 != -1) {
+ /* The pabX values are set in SPROM. Use them. */
+ if (phy->type == B43_PHYTYPE_A) {
+- if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
+- (s8) dev->dev->bus->sprom.itssi_a != -1)
++ if ((s8) dev->dev->bus->sprom.r1.itssi_a != 0 &&
++ (s8) dev->dev->bus->sprom.r1.itssi_a != -1)
+ phy->tgt_idle_tssi =
+- (s8) (dev->dev->bus->sprom.itssi_a);
++ (s8) (dev->dev->bus->sprom.r1.itssi_a);
+ else
+ phy->tgt_idle_tssi = 62;
+ } else {
+- if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
+- (s8) dev->dev->bus->sprom.itssi_bg != -1)
++ if ((s8) dev->dev->bus->sprom.r1.itssi_bg != 0 &&
++ (s8) dev->dev->bus->sprom.r1.itssi_bg != -1)
+ phy->tgt_idle_tssi =
+- (s8) (dev->dev->bus->sprom.itssi_bg);
++ (s8) (dev->dev->bus->sprom.r1.itssi_bg);
+ else
+ phy->tgt_idle_tssi = 62;
+ }
+@@ -2894,7 +2894,7 @@ void b43_calc_nrssi_threshold(struct b43
+ if (phy->radio_ver != 0x2050)
+ return;
+ if (!
+- (dev->dev->bus->sprom.
++ (dev->dev->bus->sprom.r1.
+ boardflags_lo & B43_BFL_RSSI))
+ return;
+
+@@ -2925,7 +2925,7 @@ void b43_calc_nrssi_threshold(struct b43
+ }
+ case B43_PHYTYPE_G:
+ if (!phy->gmode ||
+- !(dev->dev->bus->sprom.boardflags_lo & B43_BFL_RSSI)) {
++ !(dev->dev->bus->sprom.r1.boardflags_lo & B43_BFL_RSSI)) {
+ tmp16 = b43_nrssi_hw_read(dev, 0x20);
+ if (tmp16 >= 0x20)
+ tmp16 -= 0x40;
+@@ -3447,7 +3447,7 @@ static u16 radio2050_rfover_val(struct b
+ }
+
+ if ((phy->rev < 7) ||
+- !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
++ !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+ if (phy_register == B43_PHY_RFOVER) {
+ return 0x1B3;
+ } else if (phy_register == B43_PHY_RFOVERVAL) {
+@@ -3487,7 +3487,7 @@ static u16 radio2050_rfover_val(struct b
+ }
+ } else {
+ if ((phy->rev < 7) ||
+- !(sprom->boardflags_lo & B43_BFL_EXTLNA)) {
++ !(sprom->r1.boardflags_lo & B43_BFL_EXTLNA)) {
+ if (phy_register == B43_PHY_RFOVER) {
+ return 0x1B3;
+ } else if (phy_register == B43_PHY_RFOVERVAL) {
+@@ -3979,7 +3979,7 @@ int b43_radio_selectchannel(struct b43_w
+ b43_write16(dev, B43_MMIO_CHANNEL, channel2freq_bg(channel));
+
+ if (channel == 14) {
+- if (dev->dev->bus->sprom.country_code ==
++ if (dev->dev->bus->sprom.r1.country_code ==
+ SSB_SPROM1CCODE_JAPAN)
+ b43_hf_write(dev,
+ b43_hf_read(dev) & ~B43_HF_ACPR);
+Index: b43/wa.c
+===================================================================
+--- b43.orig/wa.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/wa.c 2008-02-15 22:50:54.000000000 +0100
+@@ -535,7 +535,7 @@ static void b43_wa_boards_g(struct b43_w
+ } else {
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 1, 0x0002);
+ b43_ofdmtab_write16(dev, B43_OFDMTAB_GAINX, 2, 0x0001);
+- if ((bus->sprom.boardflags_lo & B43_BFL_EXTLNA) &&
++ if ((bus->sprom.r1.boardflags_lo & B43_BFL_EXTLNA) &&
+ (phy->rev >= 7)) {
+ b43_phy_write(dev, B43_PHY_EXTG(0x11),
+ b43_phy_read(dev, B43_PHY_EXTG(0x11)) & 0xF7FF);
+@@ -548,7 +548,7 @@ static void b43_wa_boards_g(struct b43_w
+ }
+ }
+ }
+- if (bus->sprom.boardflags_lo & B43_BFL_FEM) {
++ if (bus->sprom.r1.boardflags_lo & B43_BFL_FEM) {
+ b43_phy_write(dev, B43_PHY_GTABCTL, 0x3120);
+ b43_phy_write(dev, B43_PHY_GTABDATA, 0xC480);
+ }
+Index: b43/xmit.c
+===================================================================
+--- b43.orig/xmit.c 2008-02-06 00:55:14.000000000 +0100
++++ b43/xmit.c 2008-02-15 22:49:37.000000000 +0100
+@@ -444,7 +444,7 @@ static s8 b43_rssi_postprocess(struct b4
+ else
+ tmp -= 3;
+ } else {
+- if (dev->dev->bus->sprom.
++ if (dev->dev->bus->sprom.r1.
+ boardflags_lo & B43_BFL_RSSI) {
+ if (in_rssi > 63)
+ in_rssi = 63;
projects / openwrt / staging / xback.git / commitdiff