ARM: dts: omap4-sdp: Fix pin muxing for wl12xx

Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and
Enable Pull up on sdmmc5_clk to detect SDIO card.

This fixes WLAN on omap4-sdp that got broken in v3.10 when we
moved omap4 to boot using device tree only as I did not have
the WL12XX card in my omap4 SDP to test with. The commit that
attempted to make WL12XX working on omap4 SDP was 775d2418f309
(ARM: dts: Fix muxing and regulator for wl12xx on the SDIO
bus for blaze).

Signed-off-by: Balaji T K <balajitk@ti.com>
[tony@atomide.com: updated comments for the regression]
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5fc3f43c5a81d4c9256b063f31bb32fc544dde38..dbc81fb6ef033428ce6b02d7287b7efa46ebfa1e 100644 (file)
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -300,12 +300,12 @@
        wl12xx_pins: pinmux_wl12xx_pins {
                pinctrl-single,pins = <
                        0x3a (PIN_INPUT | MUX_MODE3)            /* gpmc_ncs3.gpio_53 */
-                       0x108 (PIN_OUTPUT | MUX_MODE3)          /* sdmmc5_clk.sdmmc5_clk */
-                       0x10a (PIN_INPUT_PULLUP | MUX_MODE3)    /* sdmmc5_cmd.sdmmc5_cmd */
-                       0x10c (PIN_INPUT_PULLUP | MUX_MODE3)    /* sdmmc5_dat0.sdmmc5_dat0 */
-                       0x10e (PIN_INPUT_PULLUP | MUX_MODE3)    /* sdmmc5_dat1.sdmmc5_dat1 */
-                       0x110 (PIN_INPUT_PULLUP | MUX_MODE3)    /* sdmmc5_dat2.sdmmc5_dat2 */
-                       0x112 (PIN_INPUT_PULLUP | MUX_MODE3)    /* sdmmc5_dat3.sdmmc5_dat3 */
+                       0x108 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_clk.sdmmc5_clk */
+                       0x10a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_cmd.sdmmc5_cmd */
+                       0x10c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat0.sdmmc5_dat0 */
+                       0x10e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat1.sdmmc5_dat1 */
+                       0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat2.sdmmc5_dat2 */
+                       0x112 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc5_dat3.sdmmc5_dat3 */
                >;
        };
 };