--- /dev/null
+From patchwork Tue Jan 20 11:28:45 2015
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [OpenWrt-Devel] uboot-lantiq cgu settings for ramboot image
+From: Ben Mulvihill <ben.mulvihill@gmail.com>
+X-Patchwork-Id: 431024
+Message-Id: <1421753325.25187.58.camel@merveille.lan>
+To: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
+Cc: OpenWrt Development List <openwrt-devel@lists.openwrt.org>
+Date: Tue, 20 Jan 2015 12:28:45 +0100
+
+On Tue, 2015-01-20 at 00:39 +0100, Ben Mulvihill wrote:
+> On Mon, 2015-01-19 at 19:21 +0100, Ben Mulvihill wrote:
+> > On Mon, 2015-01-19 at 16:47 +0100, Daniel Schwierzeck wrote:
+> > > 2015-01-19 15:44 GMT+01:00 Ben Mulvihill <ben.mulvihill@gmail.com>:
+> > > > On Mon, 2015-01-19 at 11:51 +0000, Conor O'Gorman wrote:
+> > > >> On 19/01/15 10:46, Ben Mulvihill wrote:
+> > > >> > Hello,
+> > > >> >
+> > > >> > I am trying to build uboot-lantiq for the BT Home Hub 3A (lantiq
+> > > >> > ar9), and am wondering where to initialise the cgu, in the case
+> > > >> > of a ramboot image for uart booting. Normally the cgu is initialised
+> > > >> > in lowlevel_init, but that code is bypassed in ramboot images. The
+> > > >> > result is that the board boots with the wrong cgu settings, which
+> > > >> > sends the console haywire. So far I have tried two solutions:
+> > > >>
+> > > >> Another option is to try and not change anything. The console is already
+> > > >> configured and running. The ram does need config.
+> > > >>
+> > > >> I was used to seeing the ramboot version running at half clock speed, at
+> > > >> least on danube, previous to ar9.
+> > > >>
+> > > >> Conor
+> > > >
+> > > > Hi Conor,
+> > > >
+> > > > Thanks for the reply. But with the latest uboot-lantiq, not changing
+> > > > anything means that I don't get a usable console. With an older
+> > > > version I do at least get a uboot console, but no linux console when
+> > > > I boot openwrt. Correcting the cgu settings solves both problems.
+> > > >
+> > >
+> > > could you try this?
+> > >
+> > > diff --git a/arch/mips/cpu/mips32/arx100/cgu.c
+> > > b/arch/mips/cpu/mips32/arx100/cgu.c
+> > > index 6e71ee7..e0afbda 100644
+> > > --- a/arch/mips/cpu/mips32/arx100/cgu.c
+> > > +++ b/arch/mips/cpu/mips32/arx100/cgu.c
+> > > @@ -95,15 +95,5 @@ unsigned long ltq_get_cpu_clock(void)
+> > >
+> > > unsigned long ltq_get_bus_clock(void)
+> > > {
+> > > - u32 fpi_sel;
+> > > - unsigned long clk;
+> > > -
+> > > - fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
+> > > -
+> > > - if (fpi_sel)
+> > > - clk = ltq_get_io_region_clock() / 2;
+> > > - else
+> > > - clk = ltq_get_io_region_clock();
+> > > -
+> > > - return clk;
+> > > + return ltq_get_io_region_clock();
+> > > }
+> > >
+> > > the UART driver calculates the baudrate from the FPI bus clock, but
+> > > FPI_SEL is not available on AR9. FPI bus clock is always the same as
+> > > DDR clock, Obviously a copy&paste error from VR9 code ;)
+> > >
+> >
+> > No, even with this patch, I still don't get a working console I'm
+> > afraid. If I don't set anything explicitly, the board comes up with
+> > CGU_SYS set to 0x05, ie CGU_SYS_SYSSEL_PLL0_333_MHZ |
+> > CGU_SYS_CPUSEL_EQUAL_DDRCLK | CGU_SYS_DDRSEL_THIRD_SYSCLK.
+> > Is this a valid combination without CGU_SYS_PPESEL_250_MHZ ?
+> > I don't understand what CGU_SYS_PPESEL_250_MHZ does?
+> > The "right setting", as set by the stock uboot, is 0x80.
+>
+> P.S. There also seems to be a discrepancy between the uboot and
+> linux code. I take it from what you say above that fpi clock, ddr
+> clock and io region clock are all the same. Now if the least
+> significant bit of CGU_SYS is set, then according to the uboot
+> code - function ltq_get_bus_clock() - their value is one
+> third of the system clock. But according to the linux code
+> - function ltq_ar9_fpi_hz() in arch/mips/lantiq/xway/clk.c -
+> their value in this case is equal to the system clock.
+>
+> Or am I getting muddled? It's past my bedtime!
+>
+>
+
+Some of the bitshifting in arch/mips/cpu/mips32/arx100/cgu.c is 1
+out. A patch along these lines should fix it:
+
+--- a/arch/mips/cpu/mips32/arx100/cgu.c 2015-01-20 11:57:22.000000000 +0100
++++ b/arch/mips/cpu/mips32/arx100/cgu.c 2015-01-20 12:00:15.000000000 +0100
+@@ -10,12 +10,17 @@
+ #include <asm/lantiq/clk.h>
+ #include <asm/lantiq/io.h>
+
+-#define CGU_SYS_DDR_SEL (1 << 0)
+-#define CGU_SYS_CPU_SEL (1 << 2)
++#define CGU_SYS_DDR_SHIFT 0
++#define CGU_SYS_CPU_SHIFT 2
+ #define CGU_SYS_SYS_SHIFT 3
++#define CGU_SYS_FPI_SHIFT 6
++#define CGU_SYS_PPE_SHIFT 7
++
++#define CGU_SYS_DDR_MASK (1 << CGU_SYS_DDR_SHIFT)
++#define CGU_SYS_CPU_MASK (1 << CGU_SYS_CPU_SHIFT)
+ #define CGU_SYS_SYS_MASK (0x3 << CGU_SYS_SYS_SHIFT)
+-#define CGU_SYS_FPI_SEL (1 << 6)
+-#define CGU_SYS_PPE_SEL (1 << 7)
++#define CGU_SYS_FPI_MASK (1 << CGU_SYS_FPI_SHIFT)
++#define CGU_SYS_PPE_MASK (1 << CGU_SYS_PPE_SHIFT)
+
+ struct ltq_cgu_regs {
+ u32 rsvd0;
+@@ -68,7 +73,7 @@ unsigned long ltq_get_io_region_clock(vo
+ u32 ddr_sel;
+ unsigned long clk;
+
+- ddr_sel = ltq_cgu_sys_readl(1, CGU_SYS_DDR_SEL);
++ ddr_sel = ltq_cgu_sys_readl(CGU_SYS_DDR_MASK, CGU_SYS_DDR_SHIFT);
+
+ if (ddr_sel)
+ clk = ltq_get_system_clock() / 3;
+@@ -83,7 +88,7 @@ unsigned long ltq_get_cpu_clock(void)
+ u32 cpu_sel;
+ unsigned long clk;
+
+- cpu_sel = ltq_cgu_sys_readl(1, CGU_SYS_CPU_SEL);
++ cpu_sel = ltq_cgu_sys_readl(CGU_SYS_CPU_MASK, CGU_SYS_CPU_SHIFT);
+
+ if (cpu_sel)
+ clk = ltq_get_io_region_clock();
+@@ -98,7 +103,7 @@ unsigned long ltq_get_bus_clock(void)
+ u32 fpi_sel;
+ unsigned long clk;
+
+- fpi_sel = ltq_cgu_sys_readl(1, CGU_SYS_FPI_SEL);
++ fpi_sel = ltq_cgu_sys_readl(CGU_SYS_FPI_MASK, CGU_SYS_FPI_SHIFT);
+
+ if (fpi_sel)
+ clk = ltq_get_io_region_clock() / 2;
projects / openwrt / staging / dangole.git / commitdiff