--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "linksys,e5600", "mediatek,mt7621-soc";
+ model = "Linksys E5600";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "amber:wps";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_power: power {
+ label = "blue:power";
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wan_amber {
+ label = "amber:wan";
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan_blue {
+ label = "blue:wan";
+ gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u_env";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ factory: partition@c0000 {
+ label = "factory";
+ reg = <0xc0000 0x40000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "s_env";
+ reg = <0x100000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "devinfo";
+ reg = <0x140000 0x40000>;
+ read-only;
+ };
+
+ partition@180000 {
+ label = "kernel";
+ reg = <0x180000 0x400000>;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x580000 0x1a00000>;
+ };
+
+ partition@1f80000 {
+ label = "alt_firmware";
+ reg = <0x1f80000 0x1e00000>;
+ };
+
+ partition@3d80000 {
+ label = "gdata";
+ reg = <0x3d80000 0x4200000>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "uart2", "uart3", "jtag";
+ function = "gpio";
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ };
+};
+
+&pcie1 {
+ mt76@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ };
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ };
+ };
+};
+
+&xhci {
+ status = "disabled";
+};
mv $@.new $@
endef
+define Build/gemtek-trailer
+ printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
+endef
+
define Build/iodata-factory
$(eval fw_size=$(word 1,$(1)))
$(eval fw_type=$(word 2,$(1)))
endef
TARGET_DEVICES += lenovo_newifi-d1
+define Device/linksys_e5600
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 26624k
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := E5600
+ DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
+ kmod-mt7663-firmware-sta uboot-envtools
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | gemtek-trailer
+endef
+TARGET_DEVICES += linksys_e5600
+
define Device/linksys_ea7xxx
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
projects / openwrt / staging / chunkeey.git / commitdiff